阳离子型高温酸化缓蚀剂的合成及其性能评价

针对Mannich碱型缓蚀剂存在的溶解性不好和缓蚀率不高等问题,以甲醛、环己酮和苯胺为原料,合成了一种Mannich碱型缓蚀剂CH-9,将其阳离子化后,再与丙炔醇复配,得到了阳离子型高温酸化缓蚀剂CH-10。由室内性能评价可知,CH-10在盐酸中有良好的溶解分散性;与酸液中其他添加剂如粘土稳定剂和铁离子稳定剂的配伍性良好,不会对酸化地层造成堵塞;在90℃和常压下,在20%HCl溶液中加入浓度为1%的CH-10,其对N80钢片的腐蚀速率为4.765g/(m2·h);在120℃时,浓度为2%的CH-10对N80钢片的腐蚀速率为14.30g/(m2·h),均达到了SY/T5405-1996标准中的一级标准。     

SO4^2-／ZrO2固体超强酸的制备及其催化合成ETBE的研究

采用沉淀一浸渍法制备了负载型SO4^2-／ZrO2固体超强酸催化剂，运用IR、XRD等方法表征所制备催化剂的物化性质。结果表明，所制备的催化剂具有固体超强酸催化剂的特征，酸性与焙烧温度有关，适当提高焙烧温度有利于样品酸强度的提高，但焙烧温度过高会导致脱硫；浸渍液H2SO4浓度高有利于提高催化剂的硫含量，但是浓度过高，会在催化剂上形成硫酸盐，从而降低催化剂的比表面积和酸性。采用制备的催化剂气相催化乙醇与叔丁醇合成乙基叔丁基醚反应，乙基叔丁基醚的选择性为54．71％。     

甲磺酸铜催化合成草酸二异戊酯

制备了甲磺酸铜催化剂,对其结构进行了IR和热重分析,并用于催化草酸和异戊醇的酯化反应。结果表明,甲磺酸铜具有催化活性高、稳定,易分离,重复使用性能优良,对环境友好的特点。最佳酯化工艺条件为:n(异戊醇):n(草酸)=2．8:1,w(甲磺酸铜)=0．3％,以过量的异戊醇为带水剂,回流反应2．0 h,酯化率可达到96．8％。     

固体酒精的制备工艺与性能研究

以硬脂酸与氢氧化钠反应生成的硬脂酸钠用作制备固体酒精的固化剂，研究了固体酒精的制备工艺与性能的关系，通过正交试验对工艺条件进行了优化。用40mL酒精溶解2．0g硬酯酸，50mL酒精溶解0．4g氢氧化钠，在70℃下反应30min，制备的固体酒精综合性能最好。     

H型丝光沸石催化剂催化甲苯与叔丁醇的烷基化反应

针对合成对叔丁基甲苯传统工艺中存在的缺点,采用环境友好、可重复利用的H型丝光沸石催化剂(以下简称催化剂)进行了甲苯与叔丁醇的烷基化反应,并用X射线衍射和氨程序升温脱附等方法对不同焙烧温度下得到的催化剂的物相结构和酸性质进行了表征,研究了各种反应条件对催化剂的催化性能的影响。实验结果发现,在适宜的操作条件下,即催化剂的焙烧温度823K、反应温度180℃、反应时间3h、初始压力1.0MPa、原料与催化剂的质量比为8、叔丁醇与甲苯的摩尔比为4、溶剂环己烷与甲苯的摩尔比为5时,甲苯转化率达42.73%,叔丁基甲苯的选择性为96.30%,对叔丁基甲苯的选择性为80.37%。     

多业务移动通信系统中的呼叫接入控制

在多业务无线移动通信系统的呼叫接入控制中,不仅要考虑业务之间的优先级,同时也必须考虑切换呼叫的优先级。本文结合可移动边界算法和保护信道策略,提出了一种有效的多业务呼叫接入控制算法。为了方便地分析方案的性能,设计了一个二维的Markov链对方案的性能进行理论上的分析。通过数值分析结果表明,提出的算法同时保证了两种优先级,并提高了系统的性能。1     

N-苄基丙烯酰胺的合成

以丙烯腈和苯甲醇为原料，浓硫酸作催化剂，合成了N-苄基丙烯酰胺（N-BAA）。考察了反应温度、反应时间和催化剂用量等因素对产物收率的影响，得出了最佳反应条件：n（丙烯腈）：n（苯甲醇）：n（浓硫酸）=3：1：1．2，反应时间3h，反应温度60℃。在最佳条件下，N-BAA的收率可达92％。每100g粗产物用10％氢氧化钠溶液提纯，精制产物纯度可达99．80％，熔点为64～65℃。通过红外光谱对产物结构进行了表征。     

Measuring College Students' Motives for Playing Drinking Games.

Students may choose to play drinking games not only for reasons related to alcohol consumption but also because of incentives related to other aspects of play (competition, fun, interpersonal dominance, etc.). College students (120 men and 167 women) completed measures of motives for playing (based on T. J. Johnson, S. Hamilton, & V. L. Sheets, 1999) and consequences of playing drinking games. Exploratory principal-components analysis identified 8 reasons for playing. Men and women differed in their endorsement of the factors. Motives for play directly predicted consequences of play independently of alcohol consumption. Specific motives predicted specific types of consequences. In multiple regression analyses, Conformity motives were negatively related to consequences and may represent a form of protective motive. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Structural changes in isothermal crystallization process of polyoxymethylene investigated by time-resolved FTIR, SAXS and WAXS measurements

Structural evolution in the isothermal crystallization process of polyoxymethylene from the molten state has been investigated by carrying out the time-resolved measurements of infrared spectra and synchrotron small angle X-ray scattering (SAXS) and wide angle X-ray scattering. In case of isothermal crystallization at 130 °C, for example, the infrared bands intrinsic of folded chain crystal (FCC) morphology appeared at first, and then the bands of extended chain crystal (ECC) morphology were detected with time delay of ca. 150 s. In the SAXS experiment at 130 °C, the lamellar stacking structure of the long period of ca. 15 nm was observed at first, which changed rapidly to ca. 12 nm in a short time. The SAXS peak with the long period of ca. 6 nm started to appear with a time delay of ca. 150 s after the initial lamellae appeared and coexisted with the initially-observed 12 nm peak. Judging from the timing to detect these characteristic infrared and SAXS signals, a good correspondence was found to exist between the stacked lamellar structure of 12 nm long period and FCC morphology and between the structure of 6 nm long period and ECC morphology. The quantitative analysis was made for the SAXS data on the basis of the lamellar insertion model combined with the paracrystalline theory of the second-kind of disorder. The following structural evolution was deduced from all these results. Immediately after the temperature jump from the melt to 130 °C, the stacked lamellar structure of FCC morphology was generated at first. New lamellae were formed from the amorphous region in between the originally-existing lamellae about 150 s later, where the random chain segments bridging the adjacent lamellae were extended to form the taut tie chains, giving infrared bands of ECC morphology. This inserted lamellar structure of 6 nm long period coexisted at a population of ca. 6% with the initially-formed lamellar stacking structure of 12 nm long period. When the experiment was made at 150 °C, only the formation of stacked lamellar structure of FCC morphology was observed and the insertion of new lamella did not occur.     

与供应商的采购合作关系分析

对与供应商的采购合作关系进行了初步的分析，通过需求分析、选择供应商、正式建立合作关系、实施和加强合作关系4个过程展开，分别对筛选战略、供应管理计划流程、供应商的评估和选择、认证管理等关键问题进行初步分析，旨在使采购工作趋于完美。