膜-粉末炭反应器净化微污染源水

采用膜-粉末炭反应器处理微污染源水的试验结果表明,该工艺对水中的有机物具有较好的净化效果,在水温《10℃的条件下,处理可生化性很低的三家店水库水时对CODMn的去除率仍保持在65%左右;工艺对CODMn、UV254、UV410的去除效果依次增强.     

山西铝厂锅炉水冷壁膨胀异常原因分析及对策

针对山西铝厂160t／h锅炉在实际运行中膨胀异常的问题，对不同的施工方法下，水冷壁膨胀量是否正常这一问题进行分析，找出了水冷壁膨胀异常的原因，并提出了解决对策。     

大豆乳清的预处理

针对“膜法回收大豆乳清中的生物活性物质”工艺中的预处理部分进行研究，发现絮凝离心处理分别可以去除乳清中65％左右的脂肪和90％左右的悬浮固体，袋式过滤和精密微孔管等精密过滤手段对乳清的预处理效果不佳，但是袋式过滤可以作为微滤之前的保安过滤方式，为了进一步去除乳清中的杂质和同时灭菌，微滤过程是必须的，包括絮凝离心和微滤在内的预处理过程可以在蛋白质损失率只有10％左右的情况下将悬浮固体全部去除，脂肪去除率高达90％以上。中试的试验结果验证了上述结论。     

长颗粒(柱状晶)Si3N4陶瓷的研究及进展

Si3N4陶瓷材料由于具有很好的高温性能及高的力学性能，而被广泛地用于结构陶瓷，如切削刀具等。然而，因为其对缺陷很敏感，故易受灾难性的失效。人们发展了多种Si3N4增韧陶瓷，其中自增韧由于一些优异的性能越来越受到人们的重视。在此文中，着重介绍了影响Si3N4陶瓷长颗粒(柱状晶)晶粒生成的因素，并介绍了国内外对长颗粒Si3N4晶的控制研究。     

光通信用垂直腔面发射激光器的进展

垂直腔面发射激光器(VCSEL)以其优异的性能有望成为信息时代的新光源.文章介绍了用于光通信的VCSEL的开发现状.     

A new method to cope with decision makers' uncertainty in the equipment selection process

One of the main problems faced while configuring or reconfiguring manufacturing systems is to rank alternative designs taking into account all the different aspects involved (both tangible and intangible). For this purpose the Analytic Hierarchy Process (AHP) is a well-known decision making support method that addresses this problem. A major drawback of AHP is that uncertainty in the judgments of the decision makers and the resulting impact on the ranking is not considered. In real situations, however, judgments based on perceived future scenarios are almost always uncertain. To solve this problem in this paper we present the first complete probabilistic extension to the AHP method. The new method provides the decision maker not only with information on the ranking of the alternatives but also the probability that the ranking remains stable even in presence of uncertainty in the judgements. We verified the validity of the new method in a real application developed for the Ferrari racing team.     

The topographic normalization of hyperspectral data: implications for the selection of spectral end members and lithologic mapping

Compact Airborne Spectrographic Imager (CASI) hyperspectral data is used to investigate the effects of topography on the selection of spectral end members, and to assess whether the topographic correction improves the discrimination of rock units for lithologic mapping. A publicly available Digital Elevation Model (DEM), at a scale of 1:50,000, is used to model the radiance variation of the scene as a function of topography, assuming a Lambertian surface. Skylight is estimated and removed from the airborne data using a dark object correction. The CASI data is corrected on a pixel-by-pixel basis to normalize the scene to a uniform solar illumination and viewing geometry. The results show that topography has the effect of expanding end member clusters at times resulting in the overlap of clusters and that the correction process can effectively reduce the variation in detected radiance due to changes in local illumination. When topographic effects are embedded in the hyperspectral data, methods typically used for the selection of end members, such as the convex hull method, can miss end members or result in the selection of nonrepresentative pixels as end members. Thus, end members selected by some conventional methods are very likely “incomplete” or “nonrepresentative” if the topographic effect is embedded in the data. As shown in this study, the topographic correction can reveal hidden end members and achieve a better representation of end members via the statistical center of isolated clusters.     

Preparation of ion‐exchange membranes by hydrolysis of radiation‐grafted polyethylene‐g‐polyacrylamide membranes

Polyethylene‐g‐polyacrylamide membranes were prepared by graft polymerization of acrylamide onto polyethylene films using a preirradiation method. The ion‐exchange membranes were obtained by the hydrolysis of grafted films so as to transform amide groups into carboxyl groups. The fraction of amide groups transformed into carboxyl groups was limited to ～0.5. The characterization and thermal behavior of membranes with different degrees of grafting were evaluated by FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) measurements. The heat of fusion and the crystallinity of polyethylene decreased considerably in the hydrolyzed membranes depending on the degree of grafting. It was found that the grafting of acrylamide led to the reduction in crystallinity due to disruption of the crystallites (crystal defects) and dilution of the inherent crystallinity (dilution effect). The contribution of the hydrolysis step to the crystallinity decrease was negligible. The thermal stability of the membranes as obtained from TGA showed considerable enhancement after hydrolysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 149–154, 2003     

8098单片机在单相调压器中的应用

将8098单片机所特有的用软件来实现A/D,D/A及PWM信号输出的特性应用在模拟式移相电路中,展示了模拟式移相电路改造成具有智能化特点的一条有效途径。     

稀土元素的分离技术

对目前稀土元素分离过程中几种常用的分离技术进行了综述，使用得较多的仍然是溶剂萃取法和离子交换法，而且新方法也在不断地出现。