四异丁氧基镍酞菁的合成及其溶剂效应

4 异丁氧基邻苯二腈与氯化镍在强有机碱 1 ,8 二氮杂双环 (5 ,4,0 )十一碳烯 7催化下反应 ,合成了四异丁氧基镍酞菁 ,产物经FT -IR、元素分析、UV -Vis吸收光谱和1 H NMR表征了结构 ;并研究了其溶剂效应 ,结果表明 :最大吸收峰波数ν与函数 f(n ,ε)存在一定的线性关系 ,线性相关系数为 0 940 2 ,而Bayliss函数项 (n2 - 1 ) /(2n2 +1 )决定了最大吸收波长 (λmax)的位移变化 ;化合物的λmax在不同溶剂中随聚集程度增加 ,发生一定程度的蓝移     

顶空-气相色谱法同时测定塑料食品包装袋中11种有机溶剂残留量

采用顶空-气相色谱法对食品塑料包装材料中可能残留的溶剂丙酮、乙醇、乙酸乙酯、丁酮、异丙醇、正丁醇、甲苯、二甲苯等进行了分析。方法采用HP-FFAP色谱柱分离,氢火焰离子化检测器FID检测,11种溶剂能够完全分离,线性较好,样品加标回收率苯系物介于74%～78%,其他溶剂介于86%～95%,最低检出限可达0.002mg/m2。测定了10种不同材质的塑料包装材料中的溶剂残留量和苯系物残留量,方法简便、快速、重现性好,完全能满足塑料包装材料中溶剂残留量的分析。     

超高分子量聚乙烯纤维粘接性的研究

初步研究了拉伸倍率、共混改性、化学试剂表面处理对超高分子量聚乙烯（ＵＨＭＷ－ＰＥ）纤维粘接性和强度的影响。结果表明，用铬酸洗液对ＰＥ纤维进行物理和化学改性，是改善ＵＨＭＷ－ＰＥ纤维／环氧树脂粘接性较为有效的方法。     

Preparation of water‐repellent silks by a reaction with octadecenylsuccinic anhydride

Silk fibers and membranes were acylated with octadecenylsuccinic anhydride (ODSA) at 75°C for different times. Swelling [N,N‐dimethylformamide (DMF) and dimethyl sulfoxide (DMSO)] and nonswelling (xylene) solvent media were used for the reaction. Silk membranes that reacted in DMF or DMSO displayed faster reaction kinetics and attained higher weight‐gain values than fibers. The effect of the solvent on the reaction yield was in the following order: DMSO > DMF ? xylene. The Fourier transform infrared spectra of acylated silk samples showed the characteristic absorption bands of the anhydride at 2990, 2852, 1780–1700, and 1170 cm^?1. The intensity of the latter band, which increased linearly with the weight gain, was used as a marker for evaluating the reaction kinetics of the samples acylated in the nonswelling medium. The moisture regain and water retention of silk fibers acylated with ODSA decreased significantly, regardless of the solvent system used. Accordingly, the water repellency increased. Acylation induced an increase in the thermal stability of the silk fibers and membranes. Fine particles adhering to the surfaces of the silk fibers acylated in xylene were detected by scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 324–332, 2003     

溶剂对维生素C单晶生长动力学的影响

引　言当过饱和溶液中产生晶核或加入晶种时 ,溶质分子在过饱和度的推动下使晶核或晶种长大的过程就是晶体生长 .晶体生长动力学决定了晶体产品的形态及其物理性质 ,是结晶过程设计、优化和操作的基础 ,在结晶过程研究中占有重要地位[1,2 ] .晶体生长的外部条件例如过饱和度、温度、溶剂等都直接影响到晶面吸附情况的变化、晶体比表面自由焓 ,从而影响晶面的生长速度[3,4 ] .单晶研究是借助于显微镜、照相机、衍射仪等观察手段测定单晶各方向的尺寸随时间的变化 ,确定晶体生长动力学的方法[5] .作者曾采用间歇动态法实验测试维生素C在水 乙…     

Solubility of Si3N4 in Liquid SiO2

The nitrogen solubility in the SiO₂-rich liquid in the metastable binary SiO₂-Si₃N₄ system has been determined by analytical TEM to be 1%–4% of N/(O + N) at 1973–2223 K. Analysis of the near edge structure of the electron energy loss peak indicates that nitrogen is incorporated into the silicate network rather than being present as molecular N₂. A regular solution model with a positive enthalpy of mixing for the liquid was used to match the data for the metastable solubility of N in the presence of crystalline Si₃N₄ and to adjust the computed phase diagram. The solubility of Si₃N₄ in fused SiO₂ is far less than reported in liquid silicates also containing Al, Mg, and/or Y. Apparently, these cations act as modifiers that break anion bridges in the silicate network and, thereby, allow further incorporation of Si₃N₄ without prohibitive amounts of network cross-linking. Finally, indications emerged regarding the diffuse nature of the Si₃N₄-SiO₂ interface that leads to amorphous regions of higher N content.     

Enzymatic modification of trilinolein: Incorporation of n-3 polyunsaturated fatty acids

Two immobilized lipases, IM60 fromMucor miehei and SP435 fromCandida antarctica, were used as biocatalysts for the modification of trilinolein with n-3 polyunsaturated fatty acids (PUFA), such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), by using their ethyl esters as acyl donors (EEPA and EDHA, respectively). Transesterification (ester-ester interchange) reactions were carried out in organic solvent. The products were analyzed according to their equivalent carbon number and polarity by reverse-phase high-performance liquid chromatography, and the fatty acid profiles were determined by gas-liquid chromatography. Modified triacylglycerol products contained 1 or 2 molecules of n-3 PUFA. With EEPA as the acyl donor, the total EPA product yields with IM60 and SP435 as biocatalysts were 79.6 and 81.4%, respectively. However, with EDHA as the acyl donor and IM60 and SP435 as biocatalysts, the total DHA product yields were 70.5 and 79.7%, respectively. Effects of reaction parameters, such as type of solvent, enzyme load, time course, and molar ratio of substrates on the n-3 PUFA incorporation, were followed with SP435 as the biocatalyst. High yields were obtained, even in the absence of organic solvent. These lipids do hold promise for specialty nutrition and other therapeutic uses.     

Polar and Non-Polar Solvent Permeation Resistance of Blow-Molded Bottles of Polyethylene/Blends of Modified Polyamide and Polyamide 6 Clay Nanocomposite

Investigations on white spirit and acetone permeation resistance of modified polyamide and nylon 6 clay (MPANYC) blends and their corresponding polyethylene/MPANYC bottles were reported in this study. The white spirit and acetone permeation resistance of MPANYC sheets improve consistently with increasing NYC contents present in MPANYC resins after blending nylon 6 clay (NYC) in modified polyamide (MPA) resins. However, the order of barrier improvement of the PE/MPANYC and PE/NYC bottle specimens is not corresponding to the order of barrier improvement of the MPANYC and/or NYC barrier resins added in PE. The blow-molded PE/NYC bottle specimen exhibits similarly worse white spirit and acetone solvent permeation resistance as the PE bottle specimen, wherein no clearly formed NYC laminas but only dispersed NYC droplets or agglomerates were found on the fracture surfaces of the PE/NYC bottles. However, after blending optimum compositions of MPANYC in PE, the PE/MPANYC bottles with demarcated MPANYC laminas exhibit significantly better white spirit and acetone permeation resistance than the PE/MPA bottle, wherein the white spirit and acetone permeation rates of the PE/MPA₈NYC₁ bottle are about 1.3 and 1.4 times slower than those of the PE/MPA bottle, respectively. In order to understand these interesting barrier properties of PE/MPANYC and PE/NYC bottles, rheological, thermal, wide angle X-ray diffraction and morphological properties of the base MPANYC and NYC resins and their corresponding morphology present in the blow-molded bottles were investigated.     

溶剂萃取法净化湿法磷酸的工艺研究

以浓缩湿法磷酸为原料 ,研究了溶剂萃取法净化浓缩湿法磷酸工艺 (粗磷酸的预处理 ,萃取剂的选择 ,净化工艺流程 ) ,考察了振动筛板塔用于湿法磷酸净化的适用性及适宜的工艺条件 ,净化磷酸质量达到工业级热法磷酸标准。     

常见塑料溶解性能研究及其混合物的选择性分离

以常见塑料为原料,以有机物为溶剂,研究了塑料在有机溶剂中的溶解性能,提出了选择性分离混合塑料的方案。结果表明,实验所选用的塑料在有机溶剂中的溶解性能和溶解条件不同;可利用塑料与有机溶剂的相容性差别分离混合塑料。