提高热采注汽系统热效率的研究

为了降低热采成本和提高经济效益 ,建立了热采注汽系统热效率的数学模型。根据实测数据计算了 9个注汽系统的热效率。提出了改进注汽系统热效率的行之有效的措施。根据排烟的氧含量的大小 ,可以确定注汽锅炉热效率改进程度 ;按管线允许热损失量和保温材料种类 ,设计保温层厚度 ,可大大提高输汽管线热效率。仅此两项 ,即可使大部分注汽系统热效率提高 7%以上 ,井底蒸汽干度提高 10 %以上。     

模拟退火算法用于蒸汽吞吐井生产能力的预测

模拟退火算法是一种利用统计力学观点求解优化问题全局最优解的方法,是目前解决优化问题的一种比较先进的方法。本文应用模拟退火算法对蒸汽吞吐注采参数进行优化设计,并确定出了6个吞吐周期的最优周期产油量和周期注蒸汽量,较实际周期产油量和实际周期注汽量均有明显增加。将各周期的优化累积产油量和优化累积注汽量画在累积产油量与累积注汽量的双对数坐标中,得出累积注汽量和累积采油量关系曲线(简称注采关系曲线)。将该注采关系曲线外推估算了该井未来周期的累积产油量和累积注汽量,从而达到对蒸汽吞吐井生产能力的预测。     

Development,construction, and use of pneumometric tubes for measurement of steam flow in the steam lines of PVG-1000 at NPP

A system for the direct measurement of steam flow in steam lines after a steam generator, which utilizes a special design of pneumometric tubes and a computing unit that accounts for variation in steam pressure, has been developed to improve the quality of water-level regulation in the steam generators of VVéR-1000 power-generating units in the stationary and transitional modes. The advantage of the pneumometric tubes consists in their structural simplicity, high erosion resistance, and absence of irrevocable losses during measurement of steam flow. A similar measurement system is used at foreign NPP. The measurement system in question has been placed in experimental service at the No. 3 unit of the Balakovo NPP, and has demonstrated its worthiness. This measurement system can also be used to determine steam flow in the steam lines of NPP units with VVéR-1000 and VVéR-440 reactors, and PBMK-1000 power-generating units. __________ Translated from élektricheskie Stantsii, No. 3, March 2007, pp. 23–26.     

Lowering the erosion wear of long blades of the last stages by optimum hanging

Problems of optimum hanging of long rotor blades of the last stages of steam turbines are considered. Causes of nonuniform erosion wear of the inlet edges connected with inaccurate location of holes for the external damper coupling on the chord of the profile are determined. Methods for optimizing the hanging of blades for raising the reliability of the last stages are suggested. Main results of hanging performed with the help of a specially developed “LIBRA” soft hardware are presented. __________ Translated from élektricheskie Stantsii, No. 11, November 2006, pp. 36–41.     

稠油井注汽系统的热效率分析

建立了热采注汽系统热效率的计算模型。根据XX油田数据计算了2个注汽系统的热效率。提出了提高注汽系统热效率的三项措施：（1）降低锅炉的过剩空气系数；（2）按最大允许热损失设计地面输汽管线的保温层厚度；（3）使用视导热系数小的隔热油管，按箍增加隔热结构，防止热封隔器的泄漏等。     

杜84断块超稠油开发中后期稳产对策研究

对杜84断块超稠油生产中后期暴露的主要矛盾，即随着轮次升高，周期吞吐效果变差，井下技术状况日益变差。油层动用不均，汽窜加剧等问题进行了分析。并提出了相应的稳产对策-实施多井整体吞吐，大修复产，调剖等措施。现场应用证明，这些措施基本能够确保杜84断块超稠油中后期的稳产。     

车载制氧机加装预冷装置的研究与实现

航空兵部队地面保障装备之一的车载移动式制氧机，采用封闭循环水冷却，由于受到使用条件的限制，多数情况下冷却效果不尽理想，加装蒸汽压缩预冷装置，即可较好地了和低冷却系统温度，提高制冷量和整机使用寿命，又可满足整车机动性，动力等技术要求。     

湛江发电厂一号机振动的原因分析及处理

对湛江发电厂1号机4号轴瓦振动大的问题进行分析,认为其主要原因为:低压缸变形大导致动静碰摩,轴承座及盘车箱下部脱空引起刚度降低,轴承座的固有频率与工频相近等。对此,采取了相应的处理措施,实施后4号轴瓦振动得到有效解决。     

国产核电厂蒸汽发生器下封头接管区模拟装置承受循环载荷能力的试验

国产核电厂蒸汽发生器下封头群孔接管区具有应力分布复杂、焊接施工条件差的特点。为考核其承受循环载荷的能力，设计制造了与实物相似的模拟试验装置，根据核电厂运行寿命期内的载荷特点，确定了模拟试验装置的试验载荷与试验循环数。循环加载试验的结果表明，蒸汽发生器下封头群孔接管区承受循环载荷的能力在寿命期内是符合要求的。     

Steam Surface Pasteurization of Beef Frankfurters

Meat and poultry products are sources of foodborne bacterial contamination. We used flash steam heating followed by evaporative cooling to quickly reduce bacterial contamination on the surface of beef frankfurters without degrading appearance. The rate of heat transfer was studied by measuring surface temperature in a pressure chamber during steam heating. Quality changes were determined by measuring color and weight as functions of steam temperature and treatment time. Efficacy of the process was verified by microbiological experiments using L. innocua. Treatment times of 30–40 set at 115–136°C gave a 4 log reduction in bacterial counts on the surface without severely affecting color or weight. After long-term storage at 6°C and at 19°C, levels of bacteria on inoculated frankfurters remained reduced and there was no difference between treated and untreated products in color or weight.