Effect of heating-rate on failure temperature of pre-loaded brass H62

The response and failure of brass H62 specimens subjected to different levels of pre-loaded stresses and heating rates were investigated using a Gleeble-1500 thermal-mechanical material testing system. The metallographs of the tested material were also observed and analyzed. It is found that the increase of either pre-loaded stress or heating-rate decreases the failure temperature. Metallographic analysis shows that high heating-rate may cause stronger local thermal inconsistency （LTI） and remarkably increase the microdefects in the material, which may markedly degrade the macroscopic mechanical properties of the material.     

用离子束混合及快速热处理方法形成钽的硅化物

本文描述用离子束透过钽金属膜进行混合和快速热处理方法来形成钽的硅化物.用溅射方法在P型硅衬底上淀积一层金属钽,然后用砷离子束透过钽金属模进行混合,采用快速热处理后形成了平整的硅化钽薄层.使用厚度为500埃的钽金属膜,得到钽的硅化物薄层电阻为5.5Ω/□.研究了砷离子能量、剂量及钽膜厚度对钽的硅化物薄层电阻的影响.用透射电镜和台阶仪对所形成的硅化钽进行了分析和厚度测量.     

Halogen-induced charge transfer polymerization of pyrrole in aqueous media

Simultaneous polymerization and doping of pyrrole have been carried out in the presence of a halogenic electron acceptor, bromine (Br₂) or iodine (I₂), in aqueous dispersion or in a two-phase solvent system. The morphology of the polypyrrole (PPY) so produced is granular and porous. The electrical conductivity of the PPY-I₂ charge transfer (CT) complex is of the order of 10¹ ohm⁻¹ cm⁻¹ while that of the PPY-Br₂ complex is about one order of magnitude less. Both complexes are stable in the atmosphere. The physicochemical properties of the PPY-I₂ and PPY-Br₂ CT complexes prepared under various experimental conditions are examined in detail.     

离子注入半导体的快速热退火与SOI技术

自1977年以来,为了摸索离子注入半导体的新退火方法,各国学者进行了大量的研究工作。这种努力是从激光退火的研究开始的。激光与半导体材料相互作用的研究,已派生出若干很有生命力的应用项目,其中,快速热退火、SOI(Semiconductor on Insulator)技术等已显示了重要的应用前景,并正在走向实用化。     

A new method of characterization for stratified thermal energy stores

A new method for characterization of stratified thermal energy stores (TES) that integrates both the first law and the second law concerns is presented here. The first law concern is incorporated into a quantity called energy response factor and the second law concern into an entropy generation ratio. A product of these two quantities is at the heart of the TES efficiency definitions. This approach removes the overemphasis of the existing methods either on the first or the second law of thermodynamics which often biases the characterization results. The information about the evolution of the temperature field of the system in time is the prerequisite of the new method. It may be obtained from experiments or from suitable numerical simulations. The current method can be easily integrated into computational fluid dynamic (CFD) simulations and thus facilitate CFD-based design analysis. As an example of such CFD-integrated analysis, a large-scale hot water seasonal heat store is numerically studied to identify the effects of aspect ratio, containment shape, internal structures, and containment size on their efficiency. The results suggest the effectiveness of the new method in deriving useful design insights.     

Rates of Crystallization of Dried Lactose-sucrose Mixtures

The isothermal crystallization kinetics of glassy lactose/sucrose mixtures were studied at several storage temperatures (close to T_g and T_m). The kinetic parameters implicit in the Avrami equation were determined. Activation energies for transport (E_D) and surface nucleation (W*) were also found and correlated to the molar composition of the lactose/sucrose mixtures. A monotonic increase in the half crystallization time (t_1/z), Avrami index (n), % crystallization per day, activation energy for transport (E_D) and surface nucleation energy (W*) and a decrease in the crystallization velocity constants (K) were related to the increase in the lactose content of lactose/sucrose mixtures.     

延长分米波电视发射管使用寿命的探讨（上）

文章从原理上讨论了影响分米波电视发射管寿命的若干因素。并提出了若干延长寿命的建议：（１）正确的灯丝加热方法是行之有效的措施，经验证明：过分强调降低灯丝电压往往得到相反的效果。（２）必须有良好的冷却方式。（３）通过对帘栅电路的分析，说明对此电路必须作很好的处理以消除故障和防止寄生振荡。     

高功率板条固体激光器研究的进展

本文对高功率板条固体激光器研究的进展和应用前景作了综合评述。结合作者部分工作,对板条激光器的热效应、聚光器和光学谐振腔等关键问题和技术进行了物理分析。     

制备W－Ni－Cu钨合金的热解还原法工艺探讨

用硝酸镍、氯化铜与乙酸镍、乙酸铜的溶液分别与钨粉混合，干燥，经热解还原法制备的Ｗ－Ｎｉ－Ｃｕ钨合金，其技术指标均可满足使用要求。文章分析、讨论了这两种工艺特性及存在的问题。采用硝酸镍、氯化铜代镍、铜所制备的钨合金，在热解还原过程中产生大量有毒气体、严重的污染环境。乙酸镍、乙酸铜代镍和铜制备的钨合金，在热解还原过程中较好地解决了对环境及产品的污染问题，并保持了热解还原工艺的特性。     

磨机大齿轮对缝处产生张口的初探

针对大中型磨机大齿轮对缝处在使用中会产生张口现象而降低其使用寿命的问题,从分析产生张口的原因入手,通过理论计算,提出设计的配合间隙,并指出在安装与使用中应注意的问题.