梁112块沙四段薄互层低渗透油藏水力压裂工艺优化

梁112块沙四段薄互层油藏属于典型的高压、特低渗透油藏,具有油层多、单层薄、砂岩与泥岩交互等特点。常规压裂效果不理想。通过建立单井模型,确定了压裂应以增加裂缝的长度为主;利用FracproPT软件模拟优化加砂规模;根据油层物性特点优化射孔方案;配套应用粉陶降滤和控制缝高等技术优化了水力压裂工艺。2004年共对11口井实施了大型水力压裂,平均加砂量为42.5m3,平均加砂强度为1.6m3/m,累积增产原油达2.75×104t。     

Attribute Allocation and Retrieval Scheme for Large-Scale Sensor Networks

Wireless sensor network is an emerging technology that enables remote monitoring of large geographical regions. In this paper, we address the problem of distributing attributes over such a large-scale sensor network so that the cost of data retrieval is minimized. The proposed scheme is a data-centric storage scheme where the attributes are distributed over the network depending on the correlations between them. The problem addressed here is similar to the Allocation Problem of distributed databases. In this paper, we have defined the Allocation Problem in the context of sensor networks and have proposed a scheme for finding a good distribution of attributes to the sensor network. We also propose an architecture for query processing given such a distribution of attributes. We analytically determine the conditions under which the proposed architecture is beneficial and present simulation results to demonstrate the same. To the best of our knowledge, this is the first attempt to determine an allocation of attributes over a sensor network based on the correlations between attributes.     

没有SDC的(t，n)门限秘密共享方案

利用椭圆曲线离散问题对数问题的难解性,给出了基于椭圆曲线密码体制的(t,n)门限秘密共享方案。基于门限秘密共享方案一般分为需要SDC和不需要SDC两类,在分布式环境下,一个被所有成员信任的SDC并不存在,不需要SDC的门限秘密共享方案的安全性得到很大的提高,该方案中由组成员共同生成群公钥和私有密钥。并给出了当新成员加入时,无SDC下的周期密钥分片的更新方案。还给出了一个本方案数据实例,最后对本方案的安全性进行了分析。     

一个完善的秘密分享方案

可验证秘密分享在实用密码学领域内是一个非常重要的工具,它在密钥管理协议、门限或分布式签名协议、电子商务、多方安全计算及团体式密码系统等许多方面都有极为广泛的应用。针对一类突发事务须及时、安全解决的特点, 利用离散对数问题的难解性,在假设初始化阶段和秘密恢复阶段始终有一位值得信赖的分发者参与的情况下,提出了一个可公开验证的门限秘密分享方案。     

小波变换分离太阳射电频谱图中的纤维结构

太阳射电爆发纤维精细结构是太阳射电爆发活动中一类重要的观测现象,利用二维小波变换对纤维精细结构动态频谱图进行处理,分离频谱图中的纤维结构。首先对原始频谱图实行多层小波变换,由低频分量重构原始图像,就可得到爆发的背景信息,令原始频谱图减去背景并经过阈值处理后,便可将原始频谱图中的纤维结构很好地分离出来。     

基于主体外部轮廓的照片分割算法

在实际应用中常常需要将人像从照片的背景中有效地分割出来，通常的做法是通过提取照片中人像各部分特征来实现分割，其缺陷是计算复杂度较大，分割效果受各种干扰因素影响很大。现提出了一种基于主体外部轮廓信息的照片分割算法，通过梯度锐化、边缘保护、临近像素点相似度比较来确定图像的边界，该算法对于具有相对均匀背景的照片具有较高的计算效率。     

Noise-Assisted Signal Reception in Threshold Neuron

1IntroductionSometi mes,noise can i mprove signal transmission orsignal processing in a nonlinear system.This phe-nomenonis the so-called Stochastic Resonance(SR)[1].Most studies of SRinvolve asubthresholdsignal througha single nonlinear systemand the non…     

On the corrosion fatigue crack initiation model and expression of metallic notched elements

In the present study, attempts are made to extend the application of the mechanical model for the fatigue crack initiation (FCI) and the FCI life formula of metallic notched elements in laboratory air to those in the corrosive environment. The test results and analysis of the corrosion FCI (CFCI) life of aluminum alloys and Ti---6A1---4V show that the expression of the CFCI life obtained by modifying the FCI life formula in laboratory air can give a good fit to the test results of the CFCI life. The salt water (3.5% NaCl) environment has no effects on the CFCI resistant coefficient compared with the FCI resistant coefficient in laboratory air. However, 3.5% NaCl environment greatly decreases the CFCI threshold of aluminum alloy, but has little effect on the CFCI threshold of Ti---6A1---4V. The loading frequency ranging from 1 Hz to 10 Hz has no appreciable effect on the CFCI life, and thus, the CFCI threshold of aluminum alloys investigated. Hence, the expression for the CFCI life of metallic notched elements proposed in this study is a better one, which reveals a correlation between the CFCI life and the governing parameters, such as, the geometry of the notched elements, the nominal stress range, the stress ratio, the tensile properties and the CFCI threshold. However, this new expression of the CFCI life needs to be verified by more test results.     

自适应阵对角线加载研究

本文分析了对角线加载对自适应阵性能的影响，提出了加载门限的概念，以及加载门限的计算公式，为加载量的选取提供了方法和依据，并将加载研究的结果加以推广，提出了有效的ＬＳ自适应波束形成算法的非零初始化方法。     

BP算法的改进及用模拟电路实现的神经网络分类器

基于用模拟电路实现神经网络分类器的目的，对多层静态前馈神经网络的ＢＰ算法做了改进，采用线性限幅函数代替Ｓｉｇｍｏｉｄ函数作为神经元的激活函数，给出了改进的ＢＰ算法。对该算法性能的实验研究表明：这种改进算法不但方便了用线性模拟集成运算放大电路实现神经网络，而且具有学习速度快，映射能力强等优点。根据本文算法设计的神经网络分类器，无论是计算机仿真，还是模拟电路实现，都得到了比较高的识别率。