Inverse Analysis of Axisymmetrical Compression of HSLA Steel

The objective of the present work is to further explore the problem of selection of the flow stress function which will give the best agreement with experiments for a wide range of the Zener‐Hollomon parameter. Analysis of various flow stress functions was performed, with particular emphasis on the Zerilli‐Armstrong model. Inverse analysis was successfully applied to identify the flow stress model for microalloyed steels deformed in ferrite, two‐phase and austenite regions. Inverse method is applied to interpret the results of the axisymmetrical compression tests performed for HSLA steel samples on a Gleeble 3800 and Split Hopkinson Pressure Bar. Sensitivity analysis is performed based on local and global methods. The objective of the sensitivity analysis in the present study is the evaluation to what extent the selected coefficients in the rheological model influence the result of simulations. In the considered tests this result is represented by two dependent variables, the load and the shape of the sample (barrelling). It is confirmed that the Zerilli‐Armstrong equations should be applied at very high strain rates. Physical meaning is an advantage of this model. Difficulties with identification are the main disadvantage.     

微粒混凝土受压应力应变全曲线试验研究

采用一种特制的刚性辅助装置,进行了微粒混凝土和普通混凝土的应力应变全曲线试验研究,得到一系列应力应变曲线。对微粒混凝土和普通混凝土的立方体抗压强度与棱柱体抗压强度的关系、棱柱体抗压强度与峰值应力所对应应变的关系及棱柱体抗压强度与初始弹性模量的关系进行了分析,虽然微粒混凝土的力学性能与普通混凝土的力学性能存在一定的差别,但主要力学性能还是相似的,在模型试验中微粒混凝土是可以用来代替普通混凝土进行结构试验的。同时也验证了刚性辅助装置在测量微粒混凝土和普通混凝土的应力应变全曲线时的有效性。     

井眼剪切带分叉研究

井眼基本破坏形式是由于不稳定性造成的井眼岩石崩落坍塌和剪切带。井眼破坏的非均匀性采用传统的理论和方法不能得到较好的解释和预测。采用材料的分叉分析方法和变形局部化的数值模拟研究 ,可望对井眼失效的机理分析、预测和控制提供新的思路     

High temperature low cycle fatigue

Fatigue at high temperature is a complex phenomenon as it is influenced by a number of time-dependent processes which become important at elevated temperatures. These processes include creep, oxidation, phase instabilities and dynamic strain ageing (DSA), acting either independently or synergistically influence fatigue behaviour, often lowering the fatigue life. Current design approaches employ linear summation of fatigue and creep damage with suitable factors on permissible damage to take care of uncertainties in interaction between cyclic and time-dependent processes. It is, therefore, important to develop a deeper understanding of the processes that occur during high temperature fatigue so that realistic life predictions could be made. Results on the high temperature fatigue behaviour of austenitic stainless steels, ferritic steels and nickel base alloys are presented here. The important mechanisms of interaction of high temperature time-dependent processes with fatigue under various conditions are discussed in detail. Emphasis is placed on cyclic stress response, fatigue life, deformation substructure and fracture behaviour. This is followed by a review of important life prediction techniques under combined creep-fatigue loading conditions. Life prediction techniques considered here include linear damage summation, strain range partitioning, ductility exhaustion approach, frequency modified and frequency separation methods, techniques based on hysteresis energy and damage rate models, and methods based on crack-cavitation interation models.     

圆形截面钢筋混凝土构件裂缝宽度试验研究

对大偏心受压、受弯、大偏心受拉、小偏心受拉和轴心受拉圆形截面钢筋混凝土试件进行了试验，测定了不同荷载下的钢筋应变、裂缝宽度、裂缝宽度-荷载曲线和钢筋应力-荷载曲线，研究了各种试件的裂缝发展规律．结果表明，各种试件的裂缝发展规律基本一致，即荷载很小时不出现裂缝；从混凝土出现第一条裂缝到钢筋屈服，裂缝宽度随荷载基本呈线性增长；钢筋屈服后，裂缝随荷载增大而迅速增长．最后对裂缝宽度进行了统计分析，给出裂缝宽度的概率分布．     

循环加荷条件下饱和砂土液化细观数值模拟

利用离散单元法中的二维颗粒流方法(particle flow code in 2-dimension,PFC2D),通过对双轴数值试样施加循环等幅应变且控制加荷过程中试样体积(面积)不变的方法,模拟了循环加荷条件下饱和砂土的液化特性。在得到试样液化宏观力学响应的同时,分析了液化过程中内部平均接触数的变化规律。进一步研究了应变幅值、围压对数值试样液化特性的影响,并与室内试验规律进行了对比。结果表明,数值模拟能够定性地反映饱和砂土振动液化的一般规律,数值模拟得到的应变幅值、围压对试样抗液化强度的影响规律符合实际砂土室内试验规律。     

Measuring the load eccentricity in helical compression springs

An experimental device able to detect the load eccentricity in helical compression springs is described. The theory underlying the resolution of measured bending strains of the apparatus into effective load eccentricity is discussed. Laboratory results are offered for heavy duty springs and compared to theoretical estimates retrieved from the literature.     

等径侧向挤压应变分析

对等径侧向挤压变形的应变进行了深入的分析，应用平面纯剪切变形应变分析的结果，得到了等径侧向挤压变形真应变和等效真应变的计算公式，分析了循环等径Ｓ型侧向挤压真空应变和等效真应变的变化规律。     

运用热模拟压缩试验确定精确的金属流动方程

研究分析在用压缩试验确定金属高温塑性流动方程时影响流动应力，应变值精度的主要因素即试样表面摩擦与变形温升，并提出了相应的的修正方法。     

碳/环氧复合材料的冲击拉伸

该文研究了T300碳纤维单向增强的环氧复合材料,在应变率从10~(-3)/s到10~3/s范围内的冲击拉伸行为.通过对实验数据进行拟合,得出该范围内材料对应变率具有弱的敏感性,表现在破坏强度及破坏应变随应变率增加不显著变化,平均模量几乎不受应变率的影响.分析了试件的几何尺寸效应,讨论了应力波作用对破坏形态的影响以及实验中观察到的拔出现象.从应变率在10~2～10~3/s附近材料行为某些非确定性,指出在更宽范围内了解其性能的必要性.