Physical characteristics of sweet potato pulp/polycaprolactone blends

Sweet potato pulp (SSP) obtained as a by‐product from starch extraction was blended with polycaprolactone (PCL) to prepare a biodegradable plastic material. In the blends, PCL was used as a reinforcing agent. The SPP/PCL blends were prepared by compression‐molding under high temperature and pressure, at different SPP/PCL ratios, and the mechanical properties of the molded specimens were tested. Matrix structure and thermal properties were measured by using a Fourier transform infrared (FTIR) spectrophotometer, scanning electron microscope (SEM), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). Mechanical properties (tensile and flexural properties) were also measured to find the most suitable ratio in a SSP/PCL blend. During compression molding of the SPP/PCL blends under high pressure and temperature, chemical reaction occurred between SPP and PCL, and thus, thermal stability and mechanical strength of the blends increased and water uptake decreased. Also, by increasing the PCL content in the blend, the matrix in the blend became more homogeneous, and consequently, mechanical strength of the molded specimen increased. At 7/3 or 6/4 weight ratio of SSP/PCL, water uptake of the molded specimen became substantially less than that at 8/2. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 861–866, 2004     

加强洗选加工管理创平朔名牌产品

介绍了平朔煤炭工业公司动力煤洗选基地,洗运中心及现在洗选加工动力煤的概况,阐述了在洗选动力煤中采用的独特工艺、技术装备及加强煤炭洗选管理创造平朔名牌产品的具体措施。     

新型碳质催化剂用于NH3选择性催化还原NOx的研究

以城市污水处理厂剩余污泥为原料制备了一种新型碳质催化剂。通过试验考察了催化剂在NH₃选择催化还原NO中的应用效果。结果表明,催化性能较好，最佳的制备和催化反应条件为：锌铁物质的量比1∶0.5，热解温度750 ℃，反应温度400 ℃，O₂浓度15%。在此条件下，NOx的最大转化率达98.3%。通过考察证明催化剂自身具有一定的还原性能。对催化剂进行了FTIR、TG、SEM和BET分析，结果表明，催化剂具有很丰富的孔结构、活性粒子和表面官能团，比表面积较大，最大可达307 m²·g^-1，分析结果显示具有良好的催化条件。     

Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systems

The curing behavior of two kinds of commercial powdered resol phenolic resins was studied by differential scanning calorimetry. Liquid‐state ¹³C‐NMR spectroscopy was used to aid in understanding the curing behavior by detecting the structure of powdered resins. The reaction mechanism was interpreted with the dependency of activation energy on the degree of conversion. The results indicate that there are differences in the curing mechanism between core and face phenolic resins. The curing process of core resin was faster than that of face resin at the same reaction temperature. The water added in the curing system played an important role of plasticizer or diluent according to different curing stages and water content. In the initial curing stage, water mainly diluted the system and retarded the curing reactions. However, at the higher degrees of conversion, water played the role of plasticizer to decrease the effect of diffusion on the curing reactions to make the curing reactions more complete. The excess water added in the curing system played the role of diluent at almost all stages during the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1371–1378, 2003     

Rheological properties of bitumen in water emulsions with added solids

Experimental work was carried out to investigate the rheological properties of bitumen in water emulsions containing solids of different shape and size. The bitumen volumetric concentration was varied up to 60%, solids free basis, and the solids volume fraction (total volume basis) was varied up to 0.2. Irregular-shaped silica sand (average diameter: 9 and 33 μm) and smooth spherical glass beads (average diameter: 27 and 44 μm) were used as the added solids. In the low shear stress range, shear thinning behavior was observed for bitumen in water emulsions. At high shear stress, the viscosity of the emulsions became fairly independent of the shear stress. The addition of solids to the bitumen emulsions increased the mixture viscosity. The addition of irregular-shaped silica sand gave a higher viscosity than a similar addition of the spherical glass beads. The viscosity of the emulsion/solids mixtures was influenced by the solids size as well; the smaller size particles gave a higher viscosity. The addition of solids to the bitumen emulsions also induced shear thickening (dilatancy) behavior at high solids volume fraction. The degree of the shear thickening increased with the oil concentration.     

30%异丙甲草胺水乳剂的配方研究

通过对不同配方的异丙甲草胺水乳体系的粒径和稳定性的测定，对乳化剂、抗冻剂及悬浮助剂的筛选，确定了30％异丙甲草胺水乳剂的最佳配方，同时确定了适宜的加工工艺，即将水相加入油相的制备方法可使所得水乳剂有较好的稳定性。并通过对异丙甲草胺水乳剂稳定性影响因素的研究，发现不同含盐量（1000～5000mg／L）和不同硬度（0～500mg／L）的水对制剂的稳定性几乎无影响，有效成分含量增至40％时，制剂仍表现出较好的稳定性。     

过氧乙酸的合成与杀生作用研究

以乙酸和过氧化氢为原料合成了新型水处理杀生剂——过氧乙酸．并考察了过氧乙酸的贮存稳定性及稳定剂8-羟基喹啉的影响。通过细菌测试瓶法测细菌总数，研究了过氧乙酸杀生效果与投加浓度、pH值和作用时间之间的关系。结果表明：过氧乙酸作为水处理剂具有杀生速度快、杀生效果好的特点，是一种具有良好应用前景的水处理杀生剂。     

工业含磷废水除磷研究

在常温条件下，以低廉的氯化镁、碳酸氢铵作沉淀剂加入到含磷废水中除磷时，得到的一次处理液因含磷高无法达标排放。本文利用聚合氯化铝（PAC）和聚丙烯酰胺（PAM）作复合混凝剂，对其进行进一步除磷研究，实验研究证明，加入复合混凝剂的效果优于单独使用，并可使处理后的废水达到国家二类水排放标准。     

Pyrolysed carbon supported cobalt porphyrin: a potent catalyst for oxidation of hydrogen sulfide

Pyrolysed carbon supported cobalt porphyrin, an electrocatalyst that is frequently used for oxygen reduction in fuel cells, is evaluated for catalytic oxidation of hydrogen sulfide by dissolved dioxygen. The catalyst performs best after heat treatment at 880 °C_, at pH 8. Analysis of the reaction products reveals that sulfur is the dominant product throughout the investigated pH range 5–10. The catalyst performs much better than powdered activated carbon, granular activated carbon and different other forms of unmodified carbon catalysts. This is as far as we know the first time that heat treated cobalt porphyrins are evaluated for non-electrocatalytic applications.     

油田采出水的特性及其影响因素分析

主要介绍了油田采出水的水质特性,阐述了采出水中颗粒的性质。并详细分析了其中一些影响采出水处理的因素,包括:pH值、温度、聚合物、表面活性剂,化学助剂等。