Oxygen transport in ferrite-based ceramic membranes: Effects of alumina sintering aid

Moderate additions of Al₂O₃ to strontium ferrite-based mixed conductors, such as SrFe_0.7Al_0.3O_3−δ and La_0.2Sr_0.8Fe_0.8Ga_0.2O_3−δ with the composition close to the solid solution formation limits, make it possible to improve ceramics sinterability, to increase oxygen permeability and to decrease thermal expansion. These effects are associated with the segregation of alumina-rich phases, primarily SrAl₂O₄, and the formation of A-site cation-deficient perovskite. The improved properties of the SrFe_0.7Al_0.3O₃-based material were used to fabricate high-quality tubular membranes for methane conversion reactors. Similar enhancement in sinterability is also observed for another promising parent material of mixed-conducting membranes, La_0.5Sr_0.5FeO_3−δ. However, extensive dissolution of Al³⁺ cations in the iron sublattice, creation of A-site vacancies and changing the La:Sr concentration ratio all lead to decreasing ionic transport in La_0.5Sr_0.5FeO_3−δ. As a result, additions of either Al₂O₃ or SrAl₂O₄ have a deteriorating influence on the oxygen permeation fluxes through La_0.5Sr_0.5FeO₃-based ceramics.     

7-氨基-6-氰基-5-(3-硝基苯基)吡喃并嘧啶-2,4-二酮的合成

报道了常温、超声辐射、水中、无催化剂条件下，以3-硝基苯甲醛、丙二腈和巴比妥酸为原料合成标题化合物的方法。考察了超声技术、反应时间及反应温度对反应的影响。最佳反应条件为：室温、超声辐射2h，收率为86．2％。     

STUDY ON PERMEATION OF ACETONE/NITROGEN MIXED GAS THROUGH AL2O3 MICROPOROUS MEMBRANES: MOLECULAR DYNAMICS

In this work, by applying Materials Studio 2.2 software package, molecular dynamics (MD) was performed to investigate the dynamic processes of 1:4 acetone/nitrogen mixed gas permeating through different Al₂O₃ microporous membranes. Three systems were modeled by considering different box lengths, microporous sizes, and textures of Al₂O₃ membranes to compare different permeation behaviors. In each system, initial mixed gas contained 20 acetone molecules and 80 nitrogen molecules, and its density was set to 0.1 g/cm³. Analysis on the concentration profiles of nitrogen molecules (N2) and acetone molecules (Ace) in each system at different sampling times was implemented to discuss the permeation behaviors of smaller N2 and larger Ace. The results showed that adsorption and diffusion occurred synchronously but adsorption was dominant for acetone molecules and that the adsorption on the floor surface of the feed gas region more easily reached equilibrium (local equilibrium) than the diffusion and the adsorption on the ceiling of the initially vacuum region. Furthermore, for nitrogen, adsorption followed diffusion. Higher temperature is in favor of the enrichment of acetone on the floor surface of the feed gas region but against the adsorption of nitrogen. The adsorptive layer was found to be a double-layer with COMPASS force field and to be a monolayer with PCFF force field.     

纳米Fe2O3的制备与气敏性质的研究

报道了纳米氧化铁的制备工艺，采用沉淀法、溶胶凝胶法制备了纳米α-Fe2O3、γ-Fe2O3粉体，用热重－差热分析（TG－DTA）、X射线衍射（XRD）、透射电镜（TEM）和二次粒度分布对粒子进行表征，并制作了气体敏感元件。讨论了纳米氧化铁的制备工艺对气敏性质的影响。     

Keggin结构三维有序大孔PMo_(12)-SiO_2材料的制备与表征

以三维有序大孔SiO2为载体,采用等体积浸渍法将Keggin结构的12-磷钼酸(PMo12)固载化,制备了三维有序大孔PMo12-SiO2材料,利用IR、TG-DTA、XRD、SEM及低温N2吸附等测试手段对制备的样品进行了表征。结果表明,负载后磷钼酸的热稳定性显著提高,经500℃焙烧后,其Keggin结构依然保持;负载后,样品具有三维有序的大孔结构;磷钼酸以微晶形式高度分散在载体的孔隙中,其对孔隙的填充作用使载体的比表面积由125.4 m2/g下降到24.4 m2/g。     

片材机头中物料温度分布的模拟分析

本文利用ANSYS和MATLAB软件,对衣架型和T型片材机头中熔体的温度分布进行三维有限元模拟和分析。通过对机头流道内温度分布的模拟,得出了衣架型机头流道的温度分布优于T型机头。     

单参数Wilson方程预测C_9-DMP体系汽液平衡

根据实测γ~∞_1用单参数Wilson方程预测均三甲苯-DMP和偏三甲苯-DMP二元体系汽液平衡,并推算均三甲苯-偏三甲苯-DMP三元体系的汽液平衡,与实测数据比较,均获得良好结果。     

富氢气氛中CO的选择性氧化——碱金属助剂对Pt/γ-Al2O3催化剂性能的影响

研究了碱金属助剂对Pt/γ-Al₂O₃催化剂选择性氧化富氢气氛中CO性能的影响。结果表明，碱金属助剂的引入对Pt/γ-Al₂O₃的催化性能有不同程度的改变，其中添加Na和K后，能明显提高低温下的CO转化率。     

以葡萄糖为辅助底物发酵生产1,3-丙二醇的研究

采用Klebsiellapneumoniae对葡萄糖作为辅助底物发酵生产 1 ,3 丙二醇进行了研究。结果表明葡萄糖单独作为底物发酵时不生成 1 ,3 丙二醇。以葡萄糖和甘油为混合底物时 ,则可以显著提高菌体浓度 ,但是 1 ,3 丙二醇浓度和甘油到 1 ,3 丙二醇转化率没有提高。在甘油为底物的批式发酵过程中 ,通过流加葡萄糖作为辅助底物可以提高甘油到 1 ,3 丙二醇的摩尔转化率 ,同时可缩短发酵时间。通过选择合适的葡萄糖流加速率 ,较以甘油为单一底物的发酵结果 ,1 ,3 丙二醇的摩尔转化率最高可达0 649,提高了 53 4% ;生产强度为 1 0 0 5g/ (L·h) ,提高了 1 39 9%。     

Synthesis of Dimethyl Carbonate from Methanol and Carbon dioxide using Potassium Methoxide as Catalyst under Mild Conditions

Pd-supported on WO₃–ZrO₂ (W/Zr atomic ratio=0.2) calcined at 1073 K was found to be highly active and selective for gas-phase oxidation of ethylene to acetic acid in the presence of water at 423 K and 0.6 MPa. Contact time dependence demonstrated that acetic acid is formed via acetaldehyde formed by a Wacker-type reaction, not through ethanol by hydration of ethylene.