Effect of fiber orientation on the structural behavior of FRP wrapped concrete cylinders

In this study, 27 concrete cylinders with a diameter of 152.4 and a height of 304.8 mm were prepared. Among them, 18 cylinders were wrapped using two layers of fiber reinforced polymer (FRP) with six fiber orientations; six cylinders were wrapped using four layers of FRP with fibers in axial or hoop direction only; the remaining three cylinders were used as control. The FRP used was E-glass fiber reinforced ultraviolet (UV) curing vinyl ester. Fifteen coupon specimens were prepared to experimentally determine the tensile strength of the FRP with fibers oriented at 0°, 45°, and 90° from the loading direction. Co-axial compression tests were conducted on the wrapped cylinders and control cylinders. The test results were compared with existing confinement models. It is found that the strength, ductility, and failure mode of FRP wrapped concrete cylinders depend on the fiber orientation and wall thickness. Fibers oriented at a certain angle in between the hoop direction and axial direction may result in strength lower than fibers along hoop or axial direction. A larger database is desired in order to refine the existing design-oriented confinement models.     

Numerical analysis of multilayered CFRP retrofitted RC beams with partial interaction

This paper presents a theoretical model to simulate the behaviour of RC beams strengthened with multilayered CFRP matrix allowing for inter-layer slip. An element of the composite beam is assumed to be subjected to a system of forces that satisfy equilibrium and compatibility of deformations. The inter-layer slip is allowed for by relating the differential strain at the interfaces between the CFRP layers and the concrete to the longitudinal shear flow at the corresponding interface through the shear stiffness of the adhesive layer. The basic differential equations are derived in terms of displacement variables and solved numerically using finite differences. The results of the numerical simulation included slip values along the interfaces, maximum slip values, stresses and strains and deflections. The results compare reasonably well with experimental findings.     

Fracture mechanics of air-entrained concrete subjected to compression

Air voids are entrained in concrete for protection of constructed elements, especially highway pavements, against freeze-thaw damage. Entrained air void systems inadvertently reduce the compressive strength of the concrete. The present study describes development of an analytical model for evaluation of the effects of entrained air void system on the compressive strength of concrete. The model developed here will assist in predicting the compressive strength of concrete for specified mix designs. The constitutive relationships for air-entrained concrete were established by considering a micro cracked porous material with randomly distributed circular air voids and uniformly oriented cracks from the air voids. Linear elastic fracture mechanics was employed to explain the evolution of damage due to the individual voids and cracks that emanate from such voids. The damage model considers the interactions among the voids and cracks during various stages of loading. The analytical results from this study were evaluated through an experimental program for comparison of the computed and measured compressive strengths. A wide range of samples were examined that included concretes with air contents ranging from 2% to 13% air by volume of concrete. The experiments involved microscopic determination of air content and spacing factors as well as compressive strength tests for all the concrete samples.     

Microplane Model M5 with Kinematic and Static Constraints for Concrete Fracture and Anelasticity. I: Theory

Presented is a new microplane model for concrete, labeled M5, which improves the representation of tensile cohesive fracture by eliminating spurious excessive lateral strains and stress locking for far postpeak tensile strains. To achieve improvement, a kinematically constrained microplane system simulating hardening nonlinear behavior (nearly identical to previous Model M4 stripped of tensile softening) is coupled in series with a statically constrained microplane system simulating solely the cohesive tensile fracture. This coupling is made possible by developing a new iterative algorithm and by proving the conditions of its convergence. The special aspect of this algorithm (contrasting with the classical return mapping algorithm for hardening plasticity) is that the cohesive softening stiffness matrix (which is not positive definite) is used as the predictor and the hardening stiffness matrix as the corrector. The softening cohesive stiffness for fracturing is related to the fracture energy of concrete and the effective crack spacing. The postpeak softening slopes on the microplanes can be adjusted according to the element size in the sense of the crack band model. Finally, an incremental thermodynamic potential for the coupling of statically and kinematically constrained microplane systems is formulated. The data fitting and experimental calibration for tensile strain softening are relegated to a subsequent paper in this issue, while all the nonlinear triaxial response in compression remains the same as for Model M4.     

Behavior of Composite Unreinforced Masonry–Fiber-Reinforced Polymer Wall Assemblages Under In-Plane Loading

An experimental investigation was conducted to study the in-plane behavior of face shell mortar bedded unreinforced masonry (URM) wall assemblages retrofitted with fiber-reinforced polymer (FRP) laminates. Forty-two URM assemblages were tested under different stress conditions present in masonry shear and infill walls. Tests included prisms loaded in compression with different bed joint orientation (on/off-axis compression), diagonal tension specimens, and specimens loaded under joint shear. The behavior of each specimen type is discussed with emphasis on modes of failure, strength and deformation characteristics. Results showed that the application of FRP laminates on URM has a great influence on strength, postpeak behavior, as well as altering failure modes and maintaining the specimen integrity. The retrofitted specimens reached compressive strength of 1.62–5.64 times that of their unretrofitted counterparts, depending on the bed joint orientation, and joint shear strength increased by eightfold.     

Rational Approach to Shear Design in Fiber-Reinforced Polymer-Prestressed Concrete Structures

The use of plasticity-based shear design methods for fiber-reinforced polymer (FRP) reinforced and prestressed concrete, as they are used at present, is inappropriate in the long term. In particular, the use of a plasticity-based truss model for shear behavior seems to be unsound, as reliance is placed on a predominantly elastic zone to redistribute stresses. A better approach to shear design would be to employ a model incorporating force equilibrium and compatibility of strains so that the elastic properties of the FRP could be included rationally. This would help to develop a real understanding and form a basis on which new guides and codes could be founded. In tandem with a more rational analytical approach, new configurations and types of FRP reinforcement need to be developed and researched so that these materials can be used more efficiently. An analytical approach to investigate the shear response of FRP-reinforced and -prestressed concrete has been developed, based on equilibrium and compatibility across a shear discontinuity. The analytical model presented here was developed in conjunction with an experimental program. Correlation between the analytical and experimental results is good and more accurate than the current guideline provisions for concrete beams containing FRP reinforcement.     

Shear Strengthening of Reinforced Concrete Beams Using Carbon-Fiber-Reinforced Polymer Laminates

Shear failure is catastrophic and occurs usually without advance warning; thus it is desirable that the beam fails in flexure rather than in shear. Many existing reinforced concrete (RC) members are found to be deficient in shear strength and need to be repaired. Externally bonded reinforcement such as carbon-fiber-reinforced polymer (CFRP) provides an excellent solution in these situations. To investigate the shear behavior of RC beams with externally bonded CFRP shear reinforcement, 11 RC beams without steel shear reinforcement were cast at the concrete laboratory of the New Jersey Institute of Technology. After the beams were kept in the curing room for 28?days, carbon-fiber strips and fabrics made by Sika Corp. were applied on both sides of the beams at various orientations with respect to the axis of the beam. All beams were tested on a 979?kN (220?kips) MTS testing machine. Results of the test demonstrate the feasibility of using an externally applied, epoxy-bonded CFRP system to restore or increase the shear capacity of RC beams. The CFRP system can significantly increase the serviceability, ductility, and ultimate shear strength of a concrete beam; thus, restoring beam shear strength by using CFRP is a highly effective technique. An analysis and design method for shear strengthening of externally bonded CFRP has been proposed.     

Concrete Beams Exposed to Live Loading during Carbon Fiber Reinforced Polymer Strengthening

The need for structural rehabilitation of concrete structures all over the world is well known. Extensive amounts of research have been carried out and are ongoing in this field. Most of the laboratory research has been undertaken on structural elements without live load during the strengthening process. Normally owners of structures want to continue their activity or service during strengthening. Full-scale applications have shown that this is possible, but there is a lack of understanding as to how cyclic loads are distributed during strengthening; for example, traffic loads affect the final strengthening result. This paper presents laboratory tests on concrete beams strengthened with carbon fiber-reinforced polymer laminates and near-surface mounted reinforcement. The beams were subjected to a cyclic load during setting of the adhesive, and after additional hardening were then loaded by deformation control up to failure.     

Control of Corrosion-Induced Damage in Reinforced Concrete Beams Using Carbon Fiber-Reinforced Polymer Laminates

This paper presents the results of an experimental study conducted to investigate the effect of carbon fiber-reinforced polymer (CFRP) confinement on the cracking damage induced by impressed current-accelerated corrosion of reinforced concrete beams. The beams were 254?mm deep by 152?mm wide by 3,200?mm long. Two different corrosion configurations, namely uniform and shear-span corrosion, were investigated in eight specimens at three different degrees of corrosion (5, 10, and 15% theoretical mass loss). Uniform corrosion along the whole length of the beams (3,000?mm) and shear-span corrosion (900?mm from each beam end) were considered. The different degrees of corrosion were induced using an accelerated corrosion technique with an impressed current. Based on the results, it was concluded that CFRP laminate confinement reduces corrosion expansion by up to 70% and slows the rate of corrosion through decreasing the corrosion mass loss by up to 35%.     

Seismic Rehabilitation of Deficient Exterior Concrete Frame Joints

The performance of rehabilitated reinforced concrete beam-column joints was compared with the response of existing joints designed to preseismic codes to assess proposed rehabilitation techniques. Six beam-column subassemblies with nonductile reinforcement detailing were tested. The joints were subjected to quasi-static load that simulates seismic forces. The first three specimens had inadequate anchorage length of the bottom beam bars. Two of them were strengthened by using carbon-fiber-reinforced polymer sheets attached to the bottom beam face and then tested. The other three specimens had no steel ties installed in the joint zone, in addition to inadequate anchorage length of the beam bars. Two of the beam-column joints were strengthened by glass-fiber-reinforced polymer jackets of the joint zone and steel rods or plates. The rehabilitation techniques were found effective in eliminating the brittle joint shear and steel bar bond-slip failure modes, and ductile beam hinging instead occurred.