Plasmon enhancement for Vernier coupled single-mode lasing from ZnO/Pt hybrid microcavities

It is essential to develop a single mode operation and improve the performance of lasing in order to ensure practical applicability of microlasers and nanolasers.In this paper,two hexagonal microteeth with varied nanoscaled air-gaps of a ZnO microcomb are used to construct coupled whispering-gallery cavities.This is done to achieve a stable single mode lasing based on Vernier effect without requiring any complicated or sophisticated manipulation to achieve positioning with nanoscale precision.Optical gain and the corresponding ultraviolet lasing performance were improved greatly through coupling with localized surface plasmons of Pt nanoparticles.The ZnO/Pt hybrid microcavities achieved a seven-fold enhancement of intensity of single mode lasing with higher sidemode suppression ratio and lower threshold.The mechanism that led to this enhancement has been described in detail.     

Weight function,stress intensity factor and crack opening displacement solutions to periodic collinear edge hole cracks

Periodic collinear edge hole cracks and arbitrary small cracks emanating from collinear holes, which are two typical multiple site damages occurred in the aircraft structures, are studied by using the weigh function method. An explicit closed form weight function for periodic edge hole cracks in an infinite sheet is obtained and further used to calculate the stress intensity factor and crack opening displacement for various loading cases. Compared to finite element method, the present weight function is accurate and highly efficient. The interactions of the holes and cracks on the stress intensity factor and crack opening displacement are quantitatively determined by using the present weight function. An approximate weight function method is also proposed for arbitrary small cracks emanating from multiple collinear holes. This method is very useful for calculating the stress intensity factor for arbitrary small cracks.     

Fracture mechanics‐based progressive damage modelling of adhesively bonded fibre‐reinforced polymer joints

A quasi‐static progressive damage model for prediction of the fracture behaviour and strength of adhesively bonded fibre‐reinforced polymer joints is introduced in this paper. The model is based on the development of a mixed‐mode failure criterion as a function of a master R‐curve derived from the experimental results obtained from standard fracture mechanics joints. Consequently, the developed failure criterion is crack‐length and mode‐mixity dependent, and it takes into account the contribution of the fibre‐bridging effect. Energy release rate values for adhesively bonded double‐lap joints are obtained by using the virtual crack closure technique method in a finite element model, and the numerically obtained strain energy release rate is compared to the critical strain energy release rate given by the mixed‐mode failure criterion. The entire procedure is implemented in a numerical algorithm, which was successfully used for predicting the strength and R‐curve response of adhesively bonded double‐lap structural joints made of pultruded glass fibre‐reinforced polymers and epoxy adhesives.     

Fracture investigation of U‐notch made of tungsten–copper functionally graded materials by means of strain energy density

The averaged strain energy density over a well‐defined control volume was employed to assess the fracture of U‐notched specimens made of tungsten–copper functionally graded materials under prevalent mode II loading. The boundary of control volume was evaluated by using a numerical method. Power law function was employed to describe the mechanical properties (elasticity modulus, Poisson's ratio, fracture toughness and ultimate tensile stress) through the specimen width. The effect of notch tip radius and notch depth on notch stress intensity factors and mode mixity parameter χ were assessed. In addition, a comparison based on fracture load between functionally graded and homogeneous W–Cu was made. Furthermore, in this research, it was shown that the mean value of the strain energy density over the control volume can be accurately determined using coarse meshes for functionally graded materials.     

An investigation of T‐stresses in a plate with an inclined crack under biaxial loadings

For plates with an inclined crack of wide‐range aspect ratios under biaxial loadings, T‐stress values are calculated with three‐dimensional finite element method. The results show that the normalized T‐stress is crack length and orientation dependent. A linear equation for the relationship between normalized T‐stresses and biaxility factors is proposed to describe the normalized T‐stresses for different crack lengths and crack angles under different biaxial loadings, which is more convenient and involves wider biaxility ratios compared with the existing solutions. The plate thickness effect and the trend of normalized T‐stresses along the crack front thickness are also studied for mode I and I–II mixed‐mode cracks. Based on the analyses and comparisons, it is necessary to take the thickness effect into consideration when the crack length is long enough (a/W = 7/10). When the component of mode II is significant (β > 45°), and the biaxility ratios are negative, T‐stresses near the free surface are lower than those at other positions, which are the opposite of mode I crack and most of I–II mixed‐mode crack.     

The Grid Method for In‐plane Displacement and Strain Measurement: A Review and Analysis

The grid method is a technique suitable for the measurement of in‐plane displacement and strain components on specimens undergoing a small deformation. It relies on a regular marking of the surfaces under investigation. Various techniques are proposed in the literature to retrieve these sought quantities from images of regular markings, but recent advances show that techniques developed initially to process fringe patterns lead to the best results. The grid method features a good compromise between measurement resolution and spatial resolution, thus making it an efficient tool to characterise strain gradients. Another advantage of this technique is the ability to establish closed‐form expressions between its main metrological characteristics, thus enabling to predict them within certain limits. In this context, the objective of this paper is to give the state of the art in the grid method, the information being currently spread out in the literature. We propose first to recall various techniques that were used in the past to process grid images, to focus progressively on the one that is the most used in recent examples: the windowed Fourier transform. From a practical point of view, surfaces under investigation must be marked with grids, so the techniques available to mark specimens with grids are presented. Then we gather the information available in the recent literature to synthesise the connection between three important characteristics of full‐field measurement techniques: the spatial resolution, the measurement resolution and the measurement bias. Some practical information is then offered to help the readers who discover this technique to start using it. In particular, programmes used here to process the grid images are offered to the readers on a dedicated website. We finally present some recent examples available in the literature to highlight the effectiveness of the grid method for in‐plane displacement and strain measurement in real situations.     

Error estimation for the automated multi‐level substructuring method

In this study, we propose an effective method to estimate the reliability of finite element models reduced by the automated multi‐level substructuring (AMLS) method. The proposed error estimation method can accurately predict relative eigenvalue errors in reduced finite element models. A new, enhanced transformation matrix for the AMLS method is derived from the original transformation matrix by properly considering the contribution of residual substructural modes. The enhanced transformation matrix is an important prerequisite to develop the error estimation method. Adopting the basic concept of the error estimation method recently developed for the Craig–Bampton method, an error estimation method is developed for the AMLS method. Through various numerical examples, we demonstrate the accuracy of the proposed error estimation method and explore its computational efficiency. Copyright © 2015 John Wiley & Sons, Ltd.     

太阳能-空气光伏/光热一体化热泵热水系统实验特性

本文研究了一种新型光伏/光热一体化(PV/T)复合热源热泵热水系统,将多孔扁盒式PV/T集热板与空气源热泵相结合,根据不同控制方式组合成双热源并联、单太阳能和单空气能三种不同运行模式。在室外环境温度28.5℃下,将200 L 30℃热水加热到55℃,研究了加热时间、热水温度、COP等性能的变化规律,结果表明双热源并联运行模式下分别比单太阳能模式和单空气能模式的加热时间缩短了42%和54%,COP分别提高了32.78%和47.64%;同时实验研究了在夏季工况下将200 L水从9∶00循环加热到17∶00过程中系统热性能,探讨了太阳辐射强度、PV/T集热板温度对光电/光热效率的影响,通过实验对比可以得出在热电模式下系统的光电效率η_(pv)比单一光电模式平均高25.8%.     

New Failure Mode and Effects Analysis: An Evidential Downscaling Method

Failure mode and effects analysis (FMEA) is an engineering and management technique, which is widely used to define, identify, and eliminate known or potential failures, problems, errors, and risk from the design, process, service, and so on. In a typical FMEA, the risk evaluation is determined by using the risk priority number (RPN), which is obtained by multiplying the scores of the occurrence, severity, and detection. However, because of the uncertainty in FMEA, the traditional RPN has been criticized because of several shortcomings. In this paper, an evidential downscaling method for risk evaluation in FMEA is proposed. In FMEA model, we utilize evidential reasoning approach to express the assessment from different experts. Multi‐expert assessments are transformed to a crisp value with weighted average method. Then, Euclidean distance from multi‐scale is applied to construct the basic belief assignments in Dempster–Shafer evidence theory application. According to the proposed method, the number of ratings is decreased from 10 to 3, and the frame of discernment is decreased from 2¹⁰ to 2³, which greatly decreases the computational complexity. Dempster's combination rule is utilized to aggregate the assessment of risk factors. We illustrate a numerical example and use the proposed method to deal with the risk priority evaluation in FMEA. The results and comparison show that the proposed method is more flexible and reasonable for real applications. Copyright © 2014 John Wiley & Sons, Ltd.