支持向量机在交通量预测中的应用

交通量预测对于区域交通规划有重要意义。提出一种基于支持向量机理论的交通量预测方法。该方法以统计学习理论为基础，通过和BP神经网络进行比较的实验，证明其在交通量预测中的有效性。     

Improvement of emission efficiency in polymer light-emitting devices based on phosphorescent polymers

We report improvement of emission efficiency in polymer light-emitting devices (PLEDs) employing phosphorescent polymers. A hole-blocking layer was inserted between the emissive layer and the cathode to enhance recombination efficiency for the injected holes and electrons. Aluminum(III)bis(2-methyl-8-quinolinato)4-phenylphenolato (BAlq) was used for the hole-blocking layer. The resultant PLEDs exhibited significant improvement of emission efficiency. The respective external quantum efficiencies for red, green and blue PLEDs were 6.6, 11 and 6.9%. These values are very high compared with those based on conventional fluorescent polymers.     

脆断事故的原因分析和预防措施

分析高强度材料和大型工程结构元件发生低应力脆性断裂的原因及条件，指出传统强度设计理论的局限性，从设计和工艺上提出防止发生低应力脆断事故的具体措施，给使用高强度材料和设计大型工程结构元件时提供参考。     

Differentiating anxiety and depression in older adults with generalized anxiety disorder.

To examine affect and cognition in differentiating anxiety and depression, 83 older participants with generalized anxiety disorder completed the Cognitive Checklist (CCL) and the Positive and Negative Affect Schedule (PANAS). A 3-factor solution was found for the PANAS: positive affect (PA), anxiety and anger (Negative Affect 1 [NA-1]), and guilt and shame (Negative Affect 2 [NA-2]). A 2-factor structure was noted for the CCL. Correlations with anxiety and depression measures suggested that the CCL Depression (CCL-D) subscale showed stronger correlations with depression, whereas the CCL Anxiety subscale did not uniquely correlate with anxiety. The NA-1 subscale correlated positively with measures of depression and anxiety, whereas the PA subscale showed negative correlations. Hierarchical regression suggested that the CCL-D subscale was a significant predictor of self-reported depression. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

鸡冠咀金矿废水污染预测及控制标准的探讨

本文以鸡冠咀金矿废水污染为例,论述了复杂水环境的预测模式选择和参数确定;并对水质标准进行了探讨;提出了鸡冠咀金矿废水排放的控制标准。     

Corrosion behavior of NiCrMo Alloy 625 in high temperature, hydrogenated water

The corrosion behavior of NiCrMo Alloy 625 (UNS N06625) has been characterized in a 10,000 h test conducted in hydrogenated water at 260 °C. The corrosion kinetics were observed to be parabolic, the parabolic rate constant being determined by chemical descaling to be 0.074 mg dm⁻² h^−1/2. Characterizations of the corrosion oxide layer via grazing incidence X-ray diffraction and X-ray photoelectron spectroscopy in combination with argon ion milling and target factor analysis, revealed the presence of two spinel oxide phases and significant amounts of recrystallized nickel. Based on the distribution of three oxidized alloying constituents (Ni, Cr, Fe) with respect to depth and oxidation state, it was concluded that: (a) corrosion occurs in a non-selective manner, but significant amounts of nickel(II) ions are released to the water, and (b) the spinel oxides exist as a chromite-rich inner layer (Ni_0.7Fe_0.3)(Cr_0.8Fe_0.2)₂O₄ underneath a coarser, ferrite-rich outer layer (Ni_0.9Fe_0.1)(Cr_0.1Fe_0.9)₂O₄. The trivalent cation distribution in each of these phases appears to represent a solvus in the immiscible NiCr₂O₄-NiFe₂O₄ binary.     

容量系数法估算平台上部设施重量

容量系数法是用于项目初期平台上部设施估重的一种方法。本文介绍了容量系数法的理论基础、数据建立和估算实例,并分析了该法的应用条件和造成误差的原因。     

用RAFA方法定量解析芳烃混合物的EEM

本文介绍了降秩因子分析(RAFA)方法,它是从一个多组分混合物中直接定量计算其中某一组分,而不必知道其它组分的物种及含量的一种定量分析的数学方法。它适用于双线性的数据。本实验首先将荧光分光光度计与外接计算机相连,以获得样品的激发-发射矩阵(EEM),再用RAFA方法对蒽、萘、菲、芘、芴、(艹屈)六种标样的一至五组分的混合物进行定量分析,获得满意的结果。     

一种可切削玻璃陶瓷的压痕断裂特性

将断裂韧性测试的压痕方法与压痕弯曲方法相结合，独立地分离出了压痕残余应力因子ｘ，使其成为可测参量，并建立了压痕一压痕弯曲的断裂韧性测试方法．将这种方法应用于一种可切削玻璃陶瓷的测试，获得的Ｋ１ｃ值为Ｋ１ｃ＝２．０３ＭＰａ·ｍ１／２，与单边切口法（ＳＥＮＢ）获得的Ｋ１ｃ值有较好的一致性．测得的残余应力因子Ｘ＝０．０９３，符合Ａｎｓｔｉｓ经验公式的预测．     

3-D gust effect factor for slender vertical structures

Original studies on gust factor buffeting dealt with the alongwind displacement of structures. Research on this topic carried out since the nineties followed two distinct lines: the first determines the maximum effects due to the alongwind response; the second extends the original method from the alongwind response to crosswind and torsional responses. This paper represents the junction point of these research lines with reference to cantilever slender vertical structures. It derives the most relevant effects associated with the three-dimensional (3-D) wind-excited response of this structural type and shows that a suitable definition of one non-dimensional quantity, referred to as the 3-D gust effect factor, provides such effects at any level through a wide set of experimental, numerical and analytical procedures. A new definition of a 3-D equivalent static force consistent with this method is also introduced and critically compared with previous analogous statements.