Analytical Calculation of Large-Scale Deflection of Pulse-Loaded Elliptic Plates

Large deflections of pulse-loaded elliptic and round plates made of hardenable elastoplastic materials are investigated analytically using an energy-based approach. Formulas that are convenient for engineering design have been derived.     

Pullout tests of epoxy-coated reinforcement in concrete

The bond strength and slip of epoxy-coated reinforcing bars in concrete have been evaluated by carrying out single pullout and double pullout tests. In extended single pullout tests, slip measurements were made while tensile force was applied to reinforcing bars embedded in concrete. In double pullout tests, 20 cycles of load were applied at levels of steel stress between zero and 0·5 times characteristic steel strength. Strains were measured by electrical resistance strain gauges glued inside the bars. Both epoxy-coated and uncoated bars were used in the investigation, to obtain comparative results. The strain gradient along the bar was found to be less for the coated reinforcement. In general, the epoxy coating was found to increase slip in bond and thereby reduce the bond performance of coated bars.     

彩色PDP用玻璃基板

本文讨论了彩色ＰＤＰ现用钠钙玻璃的热稳定性，指出由于这种玻璃在热处理过程中易变形和收缩，因而不适合作大面积彩色ＰＤＰ基板材料，介绍了彩色ＰＤＰ基板玻璃的制造方法和特点。最后介绍了日本旭硝子公司和美国康宁公司各自为彩色ＰＤＰ新开发的玻璃基板材料ＰＤ２００和ＣＳ２５。     

Strain analysis of moving objects using a Fourier transform grid method

There is no good method to measure the shape and the strain distributions of a structure changing with time. We have previously proposed the Fourier transform grid method (FTGM) to measure the three-dimensional shape and surface strain distributions of stationary objects by analysing the two-dimensional grating images recorded with two cameras. In the stereoscopic method, it is very important to determine the accurate geometric parameters of the camera system. In this paper, the positions and the directions of cameras are accurately determined using the FTGM applied to images of a reference object on which a two-dimensional grating is drawn. Applications for analysing shape and strain distributions of vibrating rubber plates and a moving human skin are shown.     

考虑初始椭圆度的套管抗载能力分析

针对套管的不同初始椭圆度建立了套管、水泥环、地层平面应变力学模型。分析认为，在非均匀地应力作用下，套管内壁的径向变形较大，抗载能力明显降低，破坏主要是由地下非均匀地应力引起的；随着初始椭圆度的增加，在地应力作用下套管各部位产生的应力分布不均程度增大，使得套管抗外载能力减弱。建议在生产和使用过程中应严格将套管椭圆度控制在规定的范围内，从而提高套管的抗载能力。     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.     

Time and Temperature Factors in Construction of Rock Strength Criteria

Using the synthesis of the kinetic concept on solid strength and the Coulomb - Mohr strength theory as the base, the failure conditions taking into account the time and temperature factors are obtained.     

An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.     

Family-Responsive Interventions, Perceived Organizational and Supervisor Support, Work-Family Conflict, and Psychological Strain.

This study examined organizational family-responsive policies, perceptions of the organization as family supportive, and supervisor support as issues that may be salient to the experience of conflict between paid employment (work) and family roles. Data were collected from 355 managerial personnel in New Zealand. Although work-family conflict and psychological strain were strongly linked, the availability of organizational policies had no significant association with levels of conflict or strain, whereas policy usage was related only to work-to-family interference and not to family-to-work interference. On the other hand, perceptions of the organization as family supportive and supervisor support for work-family balance displayed significant relationships with key variables, highlighting the importance of these variables for interventions designed to ameliorate the negative impact of work-family conflict on managerial well-being. Implications for the effective implementation of family-responsive interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

利用预曝光技术制备复合结构光纤光栅传感器

报道利用预曝光技术制备的复合结构光纤光栅传感器。提出利用预曝光技术使某一小段光纤的折射率变大,而后在预曝光部分和未曝光部分的交接处一次性写入光栅,即可得到具有两个透射峰的透射谱。实验研究了该复合结构光纤光栅在温度和应力传感上的应用。实验结果表明,利用该复合结构光纤光栅可以实现温度与应变的同时测量。