PARAMAGNETIC MEISSNER EFFECTS IN MELT-TEXTURED Y_(0.99)Nd_(0.01)Ba_2Cu_3O_(7-y)SUPERCONDUCTOR

The paramagnetic Meissner effect (PME) was observed on the field-cooled M-T curvesof melt-textured Y0.99Nd0.01Ba2Cu3O7-y in applied magnetic fields from 1kOe toJ0kOe. In the magnetic field below 1kOe, the sample undergoes the typical transi-tion from the normal state to the superconducting state when it was cooled down. Theapplied magnetic fields in which the PME occurs, are very high compared with thefields reported in literatures. We propose that the occurrence of the PME may be dueto a phase transition of flux vortices in the superconductors.     

基于多代理的制造执行系统的研究

制造执行系统作为连接计划管理系统（ERP/MRPⅡ）和生产控制系统的桥梁与纽带，对车间层生产调度的优化，生产过程的改进等方面起了重要的作用，文章对制造执行系统的制造模式进行研究的基础上，提出了基于多Agent的制造执行系统的应用框架结构，并对基于多Agent的制造执行系统的调度系统进行了研究，最后给出了制造执行系统的调度算法结构。     

STUDY ON THE VARIATION MECHANISM OF CARBON CONTENT OF LIQUID IRON IN MELTING GASIFIER

This paper studied the changing principles of carbon content in direct reduction iron (DRI) and liquid iron in the COREX melting gasifier. Under the normal working conditions of experimental equipment, liquid nitrogen was poured into the melting gasifier from its tuyere to cool down quickly. And then seven cross sections were made to study the carburization reaction and its characteristics of the solid iron and the liquid iron, and also the reaction of carbon between the slag and the metal. According to the results, the influences of the thickness of the semi-coke layer and the temperature on the carbon content of liquid iron in the COREX melting gasifier were confirmed.     

GRAIN SHAPE EFFECT IN SUPERPLASTIC DEFORMATION

The method controlling grain shape in TMT processing and the effect of grain shape on char-acteristic parameters in superplastic deformation were discussed.The accommodation velocityof grahl boundary sliding,which is the dominant mechanism in superplastic deformation,andthe contribution of each mechanism to the total strain,as influenced by grain shape,were ana-lyzed.Grain shape has been shown to be an essential structural factor for superplasticity.Thenan analysis was made about the effect of grain shape on the region transition strain rate sothat a new concept,critical aspect for superplasticity,was worked out.These predictions werecompared with the measured results in an Al-Zn-Mg alloy.     

TA15合金的热变形行为及加工图

研究了TA15合金的热模拟压缩实验。结果表明：变形温度的升高和应变速率的减小使峰值应力和稳态应力显著降低，变形温度会影响进入稳态流动所需变形量。以热模拟压缩实验为基础，建立的加工图表明：TA15合金高温变形时存在2个非稳定区域，一个是变形温度1300K以上和应变速率10．0s^-1以上的区域，另一个是变形温度1200K以下和应变速率0．006s^-1～1．995s^-1之间的区域。同时，建立的TA15合金高温变形时的流动应力模型表征了变形温度、应变速率和变形程度对流动应力的影响，模型的计算精度较高。     

关于输气管线内衬聚乙烯管可防止其腐蚀的商榷

本文参照德国一实例，即利用多种类型PE衬层，在一定温差及有气体扩散阻挡层和无气体扩散阻挡层的条件下，详细地叙述了高压酸性气体对其进行长期渗透作用的试验。结果显示：水蒸气和腐蚀性气体（如H2S）的渗透作用是不能忽视的，甚至当PE层为5mm时亦有一定渗透性；此外，在衬层底部尚产生了化学腐蚀作用，从而促使人们必须考虑须正确选择PE下边的防腐底层。     

过热度对电脉冲孕育处理Al-5%CU合金凝固组织的影响

研究了不同的过热度对电脉冲孕育处理Al-5％Cu合金凝同组织的影响。实验结果表明：不同的过热度下对Al-5％Cu合金进行电脉冲处理，合金凝同组织均得到一定程度的细化，但过热度不同时细化效果不同。一定温度范围内．熔体温度为740℃时，电脉冲孕育处理细化的效果最好，并分析了过热度影响电脉冲孕育处理Al-5％Cu合金凝同组织的机制。     

无线传感器网络移动Sink网关系统的设计与实现*

针对无线传感器网络传统Sink网关的不足,提出了一种基于PDA的移动Sink网关系统的设计与实现方案,对其设计目标、体系结构和工作原理进行了论述,重点讨论了PDA与Sink节点之间的连接,PDA与Sink节点、PDA与GPS接收机及PDA与控制终端之间通信的一些关键技术.     

VCSTalk：基于DEA的开源软件开发人员效率评价工具*

介绍了VCSTalk的具体设计和实现架构,并展示了它用于评价若干开源软件项目中的开发人员效率的一个具体实例.     

分布式PACS通信服务中间层构造方法研究

基于目前分布式PACS中存在的问题,提出一个通信服务中间层的构造方法,分别进行了基于设计模式通信框架的构造、DICOM图像互操作和分布式PACS可复用构件的研究.通信服务中间层的构造不仅提高了分布式PACS在网络异构环境中的可移植性、可扩展性以及相关QoS性能,还满足了PACS今后发展中提出的较高的互连互操作性的要求.