基于李雅普诺夫函数法的扩张状态观测器参数优化

针对ESO参数不易整定的问题,研究了扩张状态观测器(ESO)参数优化的李雅普诺夫函数法.首先建立关于误差的线性定常状态方程和误差指标函数J,在误差指标函数J中综合考虑了跟踪误差的权重和系统的稳定性以及实际运行时的饱和值限制等因素.仿真结果表明,此方法具有概念清晰,实用简便,计算量小的优点.所提ESO参数整定方法是有效的.     

工艺参数对TiO2碳热还原合成Ti（C,N）粉末的影响

本文探讨了ＴｉＯ２碳热还原法合成Ｔｉ（Ｃ，Ｎ）粉末过程中合成温度，保温时间，Ｎ２气流量，Ｃ／Ｔｉ比值等工艺参数的变化对粉末性状的影响，实验表明，Ｎ比Ｃ更易于Ｔｉ结合，改变工艺对数可调整Ｔｉ（Ｃ１－ｘＮｘ）的ｘ值。在１４００～１７００℃间可获得ｘ值的０．６～０．８５的Ｔｉ（Ｃ１－ｘＮｘ）粉末。     

永磁同步伺服电动机的动态参数

动态参数是影响伺服电动机动态性能最主要的因素之一.动态参数的高低直接决定伺服电动机动态及稳态性能的好坏.对传统的伺服电动机而言,几个主要的动态参数都有较清晰的定义和概念,长期以来在工程实践中广泛使用.但对正弦波驱动的永磁伺服电动机来说,电机的力矩常数Kt、反电势常数Ke、电气时间常数τe、机械时间常数τm和阻尼因数D等都有了新的变化,实践中常引起误解和混淆.文中主要分析永磁同步伺服电动机几个动态参数的含义以及和传统参数之间的差异,并从控制系统的要求出发,对几个最基本的动态参数和参数之间的相互关系进行分析,得出了一些实用的结论.     

The generalized Riemann problem method for the shallow water equations with bottom topography

This paper extends the generalized Riemann problem method (GRP) to the system of shallow water equations with bottom topography. The main contribution is that the generalized Riemann problem method (J. Comput. Phys. 1984; 55 (1):1–32) is used to evaluate the midpoint values of solutions at each cell interface so that the bottom topography effect is included in numerical fluxes, and at the same step the source term is discretized with an interface method in which only mid‐point values are plugged in. This scheme is well balanced between the flux gradient and bottom topography when incorporating the surface gradient method (SGM) (J. Comput. Phys. 2001; 168 (1):1–25) into data reconstruction step, and it is also suitable for both steady and unsteady flow simulations. We illustrate the accuracy of this scheme by several 1‐D and 2‐D numerical experiments. Copyright © 2005 John Wiley & Sons, Ltd.     

A finite element method for poro mechanical modelling of geotechnical problems using local second gradient models

In this paper, a new finite element method is described and applied. It is based on a theory developed to model poromechanical problems where the mechanical part is obeying a second gradient theory. The aim of such a work is to properly model the post localized behaviour of soils and rocks saturated with a pore fluid. Beside the development of this new coupled theory, a corresponding finite element method has been developed. The elements used are based on a weak form of the relation between the deformation gradient and the second gradient, using a field of Lagrange multipliers. The global problem is solved by a system of equations where the kinematic variables are fully coupled with the pore pressure. Some numerical experiments showing the effectiveness of the method ends the paper. Copyright © 2005 John Wiley & Sons, Ltd.     

金隆闪速炉精矿喷嘴的优化

介绍金隆公司闪速炉精矿喷嘴的结构特点和运行情况,针对运行中存在的问题,通过优化操作参数、改进结构,喷嘴的性能得到了很大改善。     

中间夹层材料和保护气体对不锈钢-碳钢复合效果的影响

提出了利用中间夹层材料促进不锈钢与碳钢复合的新工艺。研究了中间夹层材料和保护气体对不锈钢与碳钢复合效果的影响规律。结果表明，采用自制的银基中间夹层材料可以使两种母材在较低的压力下实现良好的复合；加热过程中采用氩气保护能够有效地去除不锈钢表面致密的氧化膜。     

Starting solutions for some unsteady unidirectional flows of a second grade fluid

Exact solutions corresponding to the motions of a second grade fluid, due to the cosine and sine oscillations of an infinite flat plate as well as those induced by an oscillating pressure gradient are determined by means of the Fourier sine transforms. These solutions, presented as sum of the steady-state and transient solutions, satisfy both the governing equations and all associate initial and boundary conditions. In the special case when α₁ → 0, they reduce to those for a Navier-Stokes fluid.     

激光强化处理参数对轧辊表面性能的影响

通过试验，研究了激光功率、光斑直径、扫描速度、搭接量和合金粉含量等激光处理工艺参数对轧辊表面性能的影响，结果表明，轧辊表面经激光淬火处理后。性能稳定，耐磨性和抗疲劳性均有所提高，达到了生产要求．     

基于屏栅电离室的双参数谱仪研制及其应用

以屏栅电离室为基础，同时引出其阳级和阴极信号，研制了1台能够同时记录两路信号的双参数谱仪，在DEC－3000工作站上编制程序，实现了双维谱数据的获取、显示和存储。利用所建立的谱仪，测量了α放射源的双维谱，计算了α粒子的角分布，并讨论了如何利用角分布来校正活度测量中自吸收和反散射的影响以及改善电离室阳极能谱的能量分辨率。