共晶强制性熔化的界面形态

对透明共晶系ＣＢｒ４－８．４ｗｔ－％Ｃ２Ｃ１６生长的典型层片共晶组织强制熔化进行实时实地观测．表明相对于强制生长时的“界面滞后”现象，熔化界面温度高于静止时界面温度，熔化界面比静止界面更靠近热端，称为“界面超前”．随熔化速度增大，“界面超前量”增大；共晶组织分层熔化，出现两个熔化界面，α和β相熔化秩序不同，α，β相分别单独熔化，两熔化界面的相对位置由α，β相成分，熔化速度和共晶相间距等因素决定．     

群桩冲刷及抛石级配与厚度对防护效果的影响

水下群桩不可避免地发生局部冲刷而使桩基埋深减小,影响上部结构的安全,因此,群桩冲刷及其防护措施十分值得研究。通过实验室水槽试验和结果分析,研究了井字形排列群桩的间距与冲刷深度变化的关系,进而研究抛石颗粒的级配及抛石层厚度对冲刷防护效果的影响。研究发现,桩间净距的增大可使群桩局部冲刷深度减小,与桩间零净距相比,当达到临界最大桩间净距时冲刷深度可减小50%～60%,临界最大桩间净距与桩弗劳德数有关;在冲刷过程的前30%时段,群桩冲刷速率较之单桩偏小约30%～50%,群桩冲刷达到平衡时的最大冲深点位于前排桩柱前;与颗粒均匀的抛石料相比,非均匀抛石在较小的抛石层厚度下可取得更优的防护效果;存在与水动力、桩径、床沙等因素有关的最佳抛石料级配和抛石层厚度,尚需更深入的研究。     

模型桥墩局部冲刷瞬时地形数据自动获取装备研制

模型试验中冲刷地形测绘装备相对落后,致使桥墩周围局部冲刷瞬时地形数据无法实时获取,冲刷动态发展过程及机理的模型试验研究工作难以开展。研制了一种模型桥墩局部冲刷瞬时地形数据等值线自动绘制装备,并利用室内水工模型试验优化了各组成的性能指标,量化了绘制装备的设计参数,分析了监测系统在模型应用中的测绘精度及在工程原型中的适用性。模型试验研究表明,该装备结构简单,操作方便,加工制作成本较低,精度及灵敏性较高,能够快速获取动态过程中局部冲刷瞬时地形等值线,适用于局部冲刷发展影响流场特性研究中的水下地形快速测绘,也可按放大比尺制作成型后应用于涉水建筑物周围水下地形监测。     

Poly(oxyphosphazenes): A unifying look at structure and morphology

Variations in thermotropic behavior have been investigated for many crystalline polyphosphazenes. Experimental results obtained from DSC, solid-state MAS NMR, dilatometry, mechanical property (creep and dynamic) measurements, birefringence, X-ray (wide and small-angle), and electron diffraction have been made as a function of temperature in an attempt to elucidate the structure-morphology behavior in these polymers. Initially all polyphosphazenes described in this study crystallize from dilute or moderately concentrated solutions in the monoclinic form with relatively low crystallinity (50%). When heated, these specimens expand atT(1) and adopt a chain-extended 2D mesophase morphology in order to relieve congestion. Above this first-orderT(1) temperature a chain-extended –P=N– chain backbone morphology transforms into an isotropic phase at the melting temperatureT _m. When cooled, samples transform into the mesostate. However, crystallization from the mesophase belowT(1) takes place into a 3D orthorhombic state. These two modes of ordering/disordering are in accordance with (i) a hexatic chain packing [betweenT(1) andT _m] with variously mobile side groups that also exhibits smectic features when mesogenic side groups are present and (ii) a 3D orthorhombic structure of high crystallinity belowT(1). The initial monoclinic phase is accessible only via a solution crystallization route. Solid-state MAS NMR, crystallization kinetic measurements, and optical microscopy studies obtained from oriented and unoriented polymers have been especially germane in providing a unifying picture for mesophase formation and ordering in polyoxyphosphazenes. X-ray and electron diffraction evidence is complicated by critical overlapping peaks that are found under these same conditions. They demonstrate that (a) positional disorder exists along the chain direction and (b) the side chain above, as well as below, theT(1) transition is governed by the mobility, size, and type of side group in circumstances where phase transformations occur.     

改进的形态学运算在声纳图像生成中的应用

声纳技术应用日益广泛,已成为海洋测量的重要工具,而去除噪声处理是对声纳图像进行正确判读的前提,本文采用了改进的形态学算法减少声纳图像中噪声的影响,对图像进行预处理,采用Matlab图形图像处理工具对处理的算法进行仿真的方式,从而使处理效果达到最佳。     

Formation of WC/Ni hard alloy coating by laser cladding of W/C/Ni pure element powder blend

WC/Ni coating was formed by laser cladding of a W/C/Ni powder blend. The formed WC crystals have rectangular or quadrangle cross-section shapes with size of 2–30 μm. Step, twist and cross growth morphologies of WC formation were observed. The coating contains WC, CW_3, WNi, FeW₃C, Fe₆W₆C, W₃O, W, C, and (Fe,Ni) phases.     

钢表面化学气相沉积TiC晶体的择优取向

本文用化学气相沉积(CVD)法,以TiCl_4-CH_4-H_2为原料气体,在不锈钢表面获得了致密的TiC膜.研究了TiC的成膜速度、表面形貌和晶体择优取向与沉积条什的关系.结果表明,沉积温度T_(dep),碳钛比CH_4/TiCl_4强烈地影响了TiC的成膜速度、表面形貌和晶体择优取向.CH_4/TiCl_4低时,TiC晶体的择优取向为(220):而CH_4/TiCl_4高时,TiC晶体的择优取向为(200).TiC晶体的择优取向主要取决于气氛中活性碳的平衡浓度。     

多壁碳纳米管/聚酰亚胺复合材料制备及其性能研究

聚酰亚胺的前聚体,聚酰胺酸,是通过4,4-二氨基二苯醚(ODA)与3,3,4,4二苯甲酮四羧酸二酐(BTDA)反应制备的。未改性的、酸改性和胺改性的多壁碳纳米管(MWCNT)被分别地单独加入到聚酰胺酸溶液中,并加热至300℃,从而制成聚酰亚胺/碳纳米管复合材料。扫描型电子显微镜(SEM)和透射电子显微镜(TEM)的显微照片表明,酸改性的多壁碳纳米管和胺改性多壁碳纳米管在聚酰亚胺基体中被均匀一致地分散开。通过对酸和胺改性的多壁碳纳米管MWCNTS对多壁碳纳米管/聚酰亚胺复合材料的表面和体积电阻率的影响进行了研究。了解到该纳米复合材料的表面电阻率ITES从1.28×10^(15)Ω/cm^(2)(纯聚酰亚胺),降到7.59×10^(6)Ω/cm^(2)(26.98%的未改性的多壁碳纳米管含量)。除此之外,添加多壁碳纳米管影响了纳米复合材料的玻璃化转变温度。改性多壁碳纳米管意义就是提高了纳米复合材料的机械性能。多壁碳纳米管/聚酰亚胺复合材料的拉伸强度从10^(2)MPa(纯的聚酰亚胺)增加到134 MPa(6.98%酸改性多壁碳纳米管/聚酰亚胺复合材料)。     

超声辅助激光修复镍基高温合金V形槽

为了提高失效零件的修复质量,以V形槽为修复对象开展研究,在修复过程中引入超声振动. 耦合声场、温度场与流场建立超声辅助激光修复V形槽的非线性瞬态模型,对修复过程熔池形貌及其温度场进行数值模拟,并开展相关实验研究,分析超声对修复区组织及性能的影响机制. 数值模拟结果表明,超声振动能加速熔池流动与散热,提高熔深,细化晶粒并改善V形槽底部难熔区域的修复效果. 金相、扫描电子显微镜和电子背散射衍射分析结果表明,在超声作用下,晶粒尺寸和一次枝晶间距得到细化,Laves相更加弥散,Nb元素的富集受到抑制;常温和高温硬度在超声作用下分别提高了11.1%、10.4%. 研究表明,超声振动能有效改善镍基高温合金V形槽激光修复区的微观形貌,提高力学性能.     

钼对渗碳过程中碳化物形态的影响

通过萃取复型观察和对衍射花样的标定，研究了深层渗碳过程中析出碳化物的形态和分布。实验结果表明：渗碳过程中析出的形态较好的碳化物，象点状、球状和椭球状碳化物均为钼的碳化物；而形态较差的针状、网状则为（Cr、Fe）7C3和（Fe，M）3C。并对其形成机理进行了初步探讨。