Electron‐beam deposition of MgO on plastic substrate and manufacturing flexible flat fluorescent lamp

Abstract— A flexible fluorescent lamp that utilizes the same plasma discharge mode as in PDPs has been manufactured. The structure of the flexible lamp is simple and easy to manufacture. All‐plastic materials including plastic substrates, barrier ribs (spacers), and sealants for low‐temperature manufacturing processing have been adopted except for the phosphor and MgO thin film. The MgO thin films were coated on the plastic substrates as a protection layer against the plasma discharge. The adhesion and biaxial texture of MgO thin film deposited on the plastic substrates, poly‐ethyle‐nenaphthalate (PEN) and polycarbonate (PC), at low temperature (100–180°C) has been characterized. The MgO film on PEN shows good adhesion under a repeated bending test. The manufactured flexible lamp consists of two plastic substrates of about 3 in. on the diagonal, barrier rib (spacer), and external ITO electrodes. The Ne‐Xe (5%) gas mixture at 100–200 Torr was used for the discharge gas. A maximum surface luminance of about 100 cd/m² was achieved for a 1 ‐kHz AC pulse.     

铁基超微晶合金在气体放电灯电源中的应用

简述了铁基超微晶合金材料的特性．应用铁基超微晶环形铁芯材料实现了１５０ｋＨｚ高频恒流变换,并在ＨＩＭ５７５Ｗ／ＳＥ高亮度气体放电灯电源中应用获得成功．     

P9816驱动的护栏管显示与控制系统设计

设计了护栏管显示与控制系统,给出了它们的硬件电路图。结合驱动芯片P9816的通信协议,编写了相应程序来控制护栏管的显示。系统采用控制器读取SD卡中的数据并进行处理,将处理后的数据送入护栏管,护栏管即可显示丰富多彩的内容。     

灯具形态语义设计的编码与解码研究

文章将符号学中的编码解码理论应用于灯具形态设计中,从形状、色彩、材质三方面分析了灯具形态的语义特点,重点研究了灯具形态语义编码与解码的方式与特点。     

一种简化的自动中继电力载波路灯控制技术

针对道路照明线路中因大负载、大补偿电容造成电力载波信号衰减严重、载波通讯距离短的问题,提出一种采取阻波器隔离与简化的自动中继相结合的技术,以增大电力载波通讯距离,提高电力载波进行路灯控制的可靠性和稳定性.     

基于无线射频通信的多功能瓦斯报警矿灯的研制

针对目前瓦斯报警矿灯的报警信号不能被监控中心获取及井下固定瓦斯探头检测范围小、移动性差的问题,文章提出了一种具有瓦斯超限信号无线传输功能的多功能瓦斯报警矿灯的设计方案,详细介绍了该矿灯的硬件与软件设计,给出了无线射频通信方案及其关键技术。现场试验表明,该矿灯在井下环境的无线通信距离可达160 m,弥补了定点瓦斯监测的不足,确保了煤矿安全生产。     

Combustion of Liquid and Gaseous Fuels in a Supersonic Combustor

Results of an experimental study of a full scramjet model operating on kerosene, which was performed in an IT-302M hotshot wind tunnel based at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Sciences, and an experimental study of a model operating on hydrogen, which was performed in a hotshot wind tunnel with fire heating based at the China Aerodynamic Research and Development Center, are reported. The tests were performed for Mach numbers 5 and 6 for flow parameters close to in-flight conditions. An optimal system for kerosene injection under these conditions was determined, and the thrust characteristics of the engine model were examined. The possibility of controlling kerosene combustion in tests in the short-duration wind tunnel was analyzed, and special features of fuel ignition in a short combustor were considered. Intense combustion of kerosene was achieved with upstream injection of more than 3% of hydrogen, which allowed obtaining effective thrust. The distributions of static pressure and force characteristics of the model in the case of kerosene and hydrogen combustion were compared.     

高压钠灯的节能方式

分析了高压钠灯的4种节能方法,指出高压钠灯节能应因地制宜,才能取得明显的节能效果.     

煤油介质中制备淀粉基阳离子絮凝剂

以淀粉、丙烯酰胺(AM)、二甲基二烯丙基氯化铵(DMDAAC)为原料,采用氧化还原引发体系,以煤油作为连续相,通过反相乳液聚合法制备阳离子聚丙烯酰胺絮凝剂。考察了乳化剂种类和用量、引发剂浓度、反应时间及反应温度等因素对单体转化率、聚合物特性黏数及接枝率、接枝效率的影响,以及阳离子单体用量对聚合物特性黏数的影响。确定最佳工艺条件为:乳化剂质量分数6%,两种单体共占水相质量分数45%,阳离子单体占总单体的质量分数为30%,引发温度45℃,引发时间4h。在此条件下,单体转化率可达97.82%,特性黏数为340.21mL/g,接枝效率为97.93%。