Surface and thermal characteristics of rubber‐modified aromatic polyamide

Polyamide/epoxysilane (coupling agent) composites were reacted with poly(dimethylsiloxane) (PDMS), a condensation product of diethoxydimethylsilane (DEDMS), by a sol–gel process. Polyamide–PDMS nanocomposites were obtained. The existence of the condensation product of DEDMS and the reaction between the epoxy group and the polyamide were confirmed with Fourier transform infrared, attenuated total reflection, and wide‐scanning X‐ray photoelectron spectroscopy. Atomic force microscopy and contact‐angle measurements showed that the surface properties of polyamide were greatly improved by the addition of PDMS. The pyrolysis temperature of polyamide with PDMS was approximately 400°C, and the pyrolysis temperature was similar to that of pure polyamide. Also, the char contents increased with the addition of PDMS. The glass‐transition temperature of polyamide with or without PDMS was approximately 140°C according to differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1947–1955, 2004     

Preparation and properties of PET/PA6 copolymer/montmorillonite hybrid nanocomposite

From in situ polycondensation, a poly(ethylene terephthalate)/Polyamide 6 copolymer/montmorillonite nanocomposite was prepared, after the treatment of montmorillonite (MMT) with a water soluble polymer. The resulting nanocomposites were characterized by X‐ray diffraction (XRD), differential scanning calorimeter (DSC), nuclear magnetic resonance (NMR), dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM). The results of DSC, ¹H NMR, and DMA proved that the nanocomposite synthesized was PET/PA6 copolymer/MMT nanocomposite, not the PET/PA6 blend/MMT nanocomposite. The results of XRD and TEM proved that the dispersion of MMT was improved observably after the introduction of PA6 molecular chain into PET. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2512–2517, 2006     

Synthesis and properties of polyimide (containing naphthalene) nanocomposites with organo‐modified montmorillonites

2,7‐Bis(4‐aminophenoxy) naphthalene (BAPN), a naphthalene‐containing diamine, was synthesized and polymerized with a 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) to obtain a polyimide (PI) via thermal imidization. To enhance the thermal and mechanical properties of the polymer, PI–Montmorillonite (MMT) nanocomposites were prepared from a DMAc solution of poly(amic acid) and a DMAc dispersion of MMT, which were organo‐modified with various amounts of n‐dodecylamine (DOA) or cetylpyridium chloride (CPC). FTIR, XRD, and TEM (transmission electron microscopy) were used to verify the incorporation of the modifying agents into the clay structure and the intercalation of the organoclay into the PI matrix. Results demonstrated that the introduction of a small amount of MMT (up to 5%) led to the improvement in thermal stability and mechanical properties of PI. The decomposition temperature of 5% weight loss (T_d,5%) in N₂ was increased by 46 and 36°C in comparison with pristine PI for the organoclay content of 5% with DOA and CPC, respectively. The nanocomposites were simultaneously strengthened and toughened. The dielectric constant, CTE, and water absorption were decreased. However, at higher organoclay contents (5–10%), these properties were reduced because the organoclay was poorly dispersed and resulted in aggregate formation. The effects of different organo‐modifiers on the properties of PI–MMT nanocomposite were also studied; the results showed that DOA was comparable with CPC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Bulk polymerization of styrene in the presence of organomodified montmorillonite

The effect of montmorillonite (Cloisite 6A) on the bulk polymerization of styrene initiated by benzoyl peroxide (BPO) was studied by the dilatometric determination of the polymerization rates. The bulk polymerization rates increased as the montmorillonite input quantity increased. The effect became greater when the BPO concentration decreased. Under the assumption that clay participated in the radical initiation reaction of the chains, the reaction orders for clay and BPO were determined to be approximately 1.0 and 0.5, respectively. X‐ray diffraction and thermogravimetric analysis studies showed that the structure and properties of the obtained polystyrene (PS)/montmorillonite nanocomposites were greatly affected by the BPO concentration. With lower BPO concentrations, a larger interlayer distance and a higher extent of delamination for the clay were observed in the obtained PS/montmorillonite nanocomposites. The nanocomposites prepared with lower BPO concentrations also showed higher heat‐decomposition‐resistance temperatures. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1146–1152, 2005     

Characteristics of polyvinylpyrrolidone-layered silicate nanocomposites prepared by attrition ball milling

Polyvinylpyrrolidone (PVP)/sodium montmorillonite (MMT) nanocomposites prepared via the solution intercalation method were investigated by UV/vis, SEM, X-ray diffraction, TEM, FT-IR and PLM (polarized light microscopy). PVP/MMT nanocomposites show exfoliation below 20 wt% MMT and intercalation above this concentration. Nanocomposites retain good optical clarity and increased thermal resistance with MMT content. The compatibility between PVP and MMT and their enhanced properties may be explained by hydrogen bonding interactions. In addition, the nanocomposites prepared under more rigorous mixing conditions show better transparency because the smaller particle sizes are induced. In addition, the study on optically clear PVP/MMT suspensions helps one to understand how optical anisotropy of MMT is affected by the existence of polymer in aqueous solution.     

Fabrication and optical characterization of poly(2,5‐di‐n‐butoxyphenylene) nanofibril arrays

Anodic aluminum oxide (AAO) membrane can be used as template for the synthesized nanostructures. In this article, we have prepared the AAO membrane by using electrooxidation of aluminum substrate in phosphoric acid, and fabricated poly(2,5‐di‐n‐butoxyphenylene) (BuO–PPP) nanofibril arrays by oxidative coupling polymerization of 1,4‐di‐n‐butoxybenzene (DBB) within the pores of the AAO template membrane. The detailed molecular structure of the polymer nanofibrils was characterized by using infrared and ¹H nuclear magnetic resonance spectra, and estimated to consist of almost equal fractions of 1,4‐ and 1,3‐ linkages. We have used transmission electron microscopy, scanning electron microscopy, and atom force microscopy to confirm the morphologies and images of the AAO template membrane and the fabricated nanometer scale of BuO–PPP nanofibril arrays. The experimental results demonstrated that the pores of the AAO membrane were regular and uniform, and parallel each other, and the BuO–PPP chains in the narrowest template‐synthesized nanofibrils were oriented parallel to the porous axes of the AAO membrane and perpendicular to the surface of the aluminum substrate. The polymer chain orientation was partially responsible for the enhanced conductivity. The ultraviolet absorption spectrum of the BuO–PPP nanofibril arrays shown that the polymer contains a better extended π‐conjugation system along poly‐(p‐phenylene) backbone, which resulted in longer wavelength shift of the absorption band, the absorption maxima were located at 258 nm (E₁ absorption band) and 332 nm (E₂ absorption band), respectively. Photoluminescence spectrum of the BuO–PPP nanofibril arrays exhibited a blue emission. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 425–430, 2004     

Thermoplastic olefin/clay nanocomposites: Morphology and mechanical properties

Thermoplastic olefin (TPO)/clay nanocomposites were made with clay loadings of 0.6–6.7 wt %. The morphology of these TPO/clay nanocomposites was investigated with atomic force microscopy, transmission electron microscopy (TEM), and X‐ray diffraction. The ethylene–propylene rubber (EPR) particle morphology in the TPO underwent progressive particle breakup and decreased in particle size as the clay loading increased from 0.6 to 5.6 wt %. TEM micrographs showed that the clay platelets preferentially segregated to the rubber–particle interface. The breakup of the EPR particles was suspected to be due to the increasing melt viscosity observed as the clay loading increased or to the accompanying chemical modifiers of the clay, acting as interfacial agents and reducing the interfacial tension with a concomitant reduction in the particle size. The flexural modulus of the injection moldings increased monotonically as the clay loading increased. The unnotched (Izod) impact strength was substantially increased or maintained, whereas the notched (Izod) impact strength decreased modestly as the clay loading increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 928–936, 2004     

Mechanical properties and structures of dicyanate–clay nanocomposites

Dicyanate–clay nanocomposites comprising a dicyanate resin and a type of organically modified clay were prepared and characterized, and their thermomechanical properties were investigated. The organically modified clay had silicate layers of nanometer size intercalated with an organic modifier, which improved the compatibility between the clay and organic materials, such as dicyanate resins. Dynamic mechanical analysis was performed to investigate the thermomechanical properties of the dicyanate–clay nanocomposites containing various amounts of the clay. The storage modulus of the nanocomposites below their glass‐transition temperatures slightly increased with increasing clay content. The glass‐transition temperature of the dicyanate–clay nanocomposites increased with increasing clay content. The nanostructures of the dicyanate–clay nanocomposites were characterized by transmission electron microscopy and X‐ray diffraction analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2629–2633, 2003     

Heat Induced Structure Modifications in Polymer‐Layered Silicate Nanocomposites

Summary: The success of the use of layered silicates in polymer nanocomposites, to improve physical and chemical properties is strictly related to a deeper knowledge of the mechanistic aspects on which the final features are grounded. This work shows the temperature induced structural rearrangements of nanocomposites based on poly[ethylene‐co‐(vinyl acetate)] (EVA) intercalated‐organomodified clay (at 3–30 wt.‐% silicate addition) which occur in the range between 75 and 350 °C. In situ high temperature X‐ray diffraction (HT‐XRD) studies have been performed under both nitrogen and air to monitor the modifications of the nanocomposite structure at increasing temperatures under inert/oxidative atmosphere. Heating between 75 and 225 °C, under nitrogen or air, causes the layered silicate to migrate towards the nanocomposite surface and to increase its interlayer distance. The degradation of both the clay organomodifier and the VA units of the EVA polymer seems to play a key role in driving the evolution of the silicate phase in the low temperature range. The structural modifications of the nanocomposites in the high temperature range (250–350 °C), depended on the atmosphere, either inert or oxidizing, in which the samples were heated. Heating under nitrogen led to deintercalation and thus a decrease of the silicate interlayer space, whereas exfoliation was the main process under air leading to an increase of the silicate interlayer space.

Heat induced structural modification of EVA‐clay nanocomposite under nitrogen and air.     

Processing of polypropylene–clay nanocomposites: Single‐screw extrusion with in‐line supercritical carbon dioxide feed versus twin‐screw extrusion

This work investigates two different melt‐blending strategies for preparing compatibilized polypropylene‐clay nanocomposites, specifically: (1) conventional twin‐screw extrusion, and (2) single‐screw extrusion capable of direct supercritical carbon dioxide (scCO₂) feed to the extruder barrel. Proportional amounts (3 : 1) of maleic anhydride functionalized polypropylene compatibilizer and organically modified montmorillonite clay at clay loadings of 1, 3, and 5 wt % are melt‐blended with a polypropylene homopolymer using the two approaches. The basal spacing, degree of exfoliation, and dispersion of organoclay is assessed using X‐ray diffraction, transmission electron microscopy, and rheology. In terms of the latter, both steady shear and small‐amplitude oscillatory shear provide information about the apparent yield stress and solid‐like terminal behavior respectively. Finally, nanoindentation is performed to determine the room temperature modulus of each melt‐blended nanocomposite. The results reveal unequivocally that the high shear of the twin‐screw process is vastly superior to the single‐screw with in‐line scCO₂ addition in generating well‐exfoliated, percolated polypropylene‐clay nanocomposites. It is likely that increased contact time between clay and scCO₂ is necessary for scCO₂ to positively affect exfoliation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 884–892, 2007