复印粉的粉碎分级技术

本文介绍了利用国产气流粉碎机和余气萃取分级制备复印粉的实用技术，并展示了粉碎分级系统和复印粉的电镜照片。     

基于神经网络的VQ图象编码

文章给出将神经网络与矢量量化相结合的两种编码方法，介绍了其原理和实现的算法。经计算机模拟表明，在比特率低于０．３ｂｐｐ时仍可得到高质量的编码图象。     

片状陶瓷材料高低温电性能参数的自动检测

由进口电性能仪配上自制的高温系统，计算机自动采集数据，配置成一套高低温电性参数测定装置，该装置的特点是，升温快，炉体小巧，炉芯可更换盛液氮装置，屏蔽良好，等温区长，温工及参数测量精确可靠。     

起重机吊钩拖动绕线电动机他励双高调速系统

本文提出励磁电流可自动控制的他励式双高调速系统设计方案。系统在提升特别是在下放重物时，具有较硬的机械性；在负载１０－１００％的变化范围内，可实现最大偏差Δｎｍａｘ／ｎｍｉｎ１００％≤１０％，调速范围Ｄ≥１０；在满载运行条件下，可节约电能８０％以上。     

A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

Granularity Analysis for Exploiting Adaptive Parallelism of Declarative Programs on Multiprocessors

1IntroductionAutomaticparallelexecutionofdeclarativelanguageprograms(e.g.functionprogramsandlogicprograms)isattractive,asitmakestheuseofparallelcomputersveryeasy,andtheprogrammerneednotbeconcernedwiththespecificsoftheunderlyingparallelarchitecture.However,ifseveralprocessorsareexecutingconcurrently,exploitingadaptiveparallelismishardduetonon-determinismoftaskgranularityanddatadependenciesamongtasks.TheearlysolutionproposedbyConeryandKibler[2]usesanorderingalgorithmtodeterminedependenciesatrun…     

自升式平台深水化改造的新模式及其可行性分析

针对我国现有自升式平台存在的不能满足深水域勘探开发的要求以及造价过高等问题,提出一种自升式平台深水化改造新模式——分体坐底自升式平台,在基本不改变原有平台结构的基础上,通过增加可沉浮平台下体,使作业水深增加50m以上,而造价比同工作水深的常规自升式平台低得多。文章介绍了该分体坐底自升式平台的结构方案、作业工况及操作程序,分析了该平台的技术可行性和经济可行性,并提出了深入研究和具体实施需要解决的问题。     

大伙房水库输水工程隧洞施工竖井投料还原试验分析

大伙房水库地下隧洞式输水工程,隧洞掘进采用TBM为主,钻爆法为辅的施工方案.主洞混凝土衬砌料部分采用竖井方式进行投料,竖井深度多为100～200 m深,还原试验主要研究混凝土拌合物经过竖井段靠重力自由下落,在井底瞬间缓冲停止,拌合物中粗骨料自身参数的变化及其对混凝土物理指标的影响.     

三江平原水利综合规划的重新编制问题

三江平原是我国重要的商品粮基地和粮食战略后备基地。原有规划距今已过30年，远不能适应现代发展要求。结合新的形势，提出了重新编制三江平原综合规划的现实意义、目标设想及主要修编内容。     

超径大块石二次爆破简便引爆装置的研究与应用

岩石爆破工程中,不可避免的会产生一些超径大块石,这些大块石一般质量都非常好,能满足砼对骨料质量的要求,但一般情况下都要进行二次爆破才能满足粒径要求。本文介绍了白石水库工程超径大块石二次爆破过程中工程技术人员经过技术研究和实验,利用废弃的导爆管与价格低廉的火雷管组合制成了技术上可行,操作上简单的新的引爆装置的成功经验。