碾压混凝土抗裂性能的几个影响因素研究

影响碾压混凝土抗裂性能的因素很多，本文主要从水泥矿物成分、石粉含量、掺和料（氧化镁等）、骨料特性（弹性模量）及砂率等方面影响因素开展试验研究，分析各因素对碾压混凝土抗裂性能的影响效果。试验结果表明，砂率和石粉含量均存在碾压混凝土抗裂能力最大的最优含量；掺入适量的氧化镁掺和料和合理增加水泥熟料中的C，S和C4AF两种矿物成分含量，对提高碾压混凝土的抗裂能力非常有利；骨料的弹性模量是影响混凝土弹性模量的重要因素，使用低弹性模量骨料可以大大降低混凝土的弹性模量，增大极限拉伸值，提高混凝土的抗裂能力。     

嵌入式Web服务器在中小水电信息采集系统中的应用

中小水电站大多数建在偏远山区，并网管理难度非常大，解决中小水电站的信息传输是主要的技术难点之一。随着计算机技术的发展，嵌入式Web服务器技术在远程监控和实时通信系统中的应用越来越广泛。将Web技术引入中小水电站信息采集系统中，可以实现对中小水电站基于浏览器方式的远程监控。文中结合中小水电站通信结构，介绍了嵌入式Web服务器技术在中小水电站信息采集系统中的应用。     

Effects of low radiation on the power quality of a distributed PV-grid connected system

We have previously investigated effects of radiation levels on power quality of a number PV-grid interactive systems in Thailand, in terms of harmonics and voltage variation at the point of common coupling (PCC). In this paper, we focus on the nature of components of complex power (actual, reactive and apparent power) of inverter output of a PV-grid interactive system due to low radiation, below 400 W/m². The system being investigated has an array of 4.2 kWp and representative of roof top units. It is observed that a PV array supplies increasing real power, in magnitude and as percentage of complex power, at high values of radiation. At low radiation level when the array does not provide enough output power, reactive power is drawn from distribution transformer and fed into an inverter and loads. Based on results from the test site and long term radiation data of Bangkok, we then estimate energy available from low radiation from a hypothetical PV-grid interactive unit in Bangkok of a similar size. It can be seen that for a tropical climate like Thailand a significant amount of energy, 20–30% of radiation energy, is in the form of reactive power. Methods must be devised to capture this low radiation energy and converted into real power form.     

The Minimum PAPR Code for OFDM Systems

In this letter, a block code that minimizes the peak‐to‐average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals is proposed. It is shown that peak envelope power is invariant to cyclic shift and codeword inversion. The systematic encoding rule for the proposed code is composed of searching for a seed codeword, shifting the register elements, and determining codeword inversion. This eliminates the look‐up table for one‐to‐one correspondence between the source and the coded data. Computer simulation confirms that OFDM systems with the proposed code always have the minimum PAPR.     

离子束辅助沉积制备高功率激光薄膜的研究

综述了离子束辅助沉积技术在高功率激光薄膜制备中的应用研究进展.指出该技术在制备高激光损伤阈值的薄膜中存在的问题,即出现过高的堆积密度,会给薄膜带来杂质缺陷、化学计量比缺陷、损伤缺陷、晶界缺陷,制备薄膜的残余应力存在着压应力增加的趋势,会改变薄膜的晶体结构等.并指出了该研究领域的研究方向.     

Carbon nanofibers as hydrogen adsorbing materials for power sources

Porous carbon nanofibers are synthesized by CVD method from acetylene with use of iron-containing catalysts. Activation of the nanofibers in melted potassium hydroxide results in increasing surface area from initial 300–400 m² g⁻¹ to 1700 m² g⁻¹. As follows from XRD data, activated nanofibers do not contain regular packages of graphene layers, but retain high electric conductivity. Deposition of copper improves electrochemical hydrogen storing characteristics of carbon nanofibers. Carbon nanomaterials obtained can be used as hydrogen storing materials in batteries instead of hydride forming metals.     

SOC设计中的浮动压焊块电源/地线网络设计和优化

随着VLSI工艺技术的发展和芯片规模的不断增加，尤其是在SOC设计中，原有的那种供电压焊块只能位于芯片边缘的确定益的模式已经不能够满足整个电路性能的需要。在很多情况下，依靠在电源线的拓扑结构确定后的线宽优化，还是无法保证在有限的布线资源下为电路提供可靠的高性能的供电需求。由此，出现了在芯片边缘上浮动放置压焊块及在芯片的顶部放置供电压焊块阵列的方法。文中提出了一种用于SOC设计中新的基于树型结构的浮动压焊块的电源／地线网络优化算法，经过MCNC电路实例测试后得到明显的优化结果。     

32位MIPS微处理器中乘法器的设计和实现

在Booth算法的基础上,结合MIPS 4KC微处理器中的流水线结构和乘法器的工作过程,提出了一种改进的Booth乘法器的设计方法,并采用全制定方法实现,用这种方法实现的乘法器单元具有面积小、单元电路可重复性好、版图设计工作量小、功耗低等特点.     

SoC低功耗设计中的DVS技术

随着系统芯片(SoC)集成更多的功能并采用更先进的工艺,它所面临的高性能与低功耗的矛盾越来越突出.动态电压调整(DVS)技术可以在不影响处理器性能的前提下,通过性能预测软件根据处理器的繁忙程度调整处理器的工作电压和工作频率,达到降低芯片功耗的目的.文中讨论了DVS技术降低功耗的可能性,介绍了如何利用两种不同的DVS技术让处理器根据当前的工作负荷运行在不同的性能水平上,以节省不必要的功耗.     

250W带功率因数校正整流电源模块的研制

功率因数校正技术越来越成为电源行业研究的热点。文中介绍了适用于雷达等设备的250W带功率因数校正整流电源模块的设计，分析了其中升压电感器设计、主开关管保护、控制电路消振、散热设计和表面贴装等关键技术，完成了实验研究，获得了满意的试验结果。