关键词最优路径查询的分段拓展算法

关键词最优路径查询（KOR）查找在满足关键词全覆盖和路径长度约束条件下,时间开销最小的路线常用于旅行规划。现有优化算法虽然采用各种剪枝策略缩小搜索规模,但是本质上是广度优先搜索,在查找长路径时,搜索规模依然过大,执行时间长。针对该问题,提出一种关键词最优路径查询的分段拓展算法（SE-KOR）。SE-KOR算法根据关键词倒排索引表构建关键词顶点路径,将路径划分为多段分别拓展,降低搜索规模,从而缩短执行时间。该算法在路径拓展时给出路径走向,而现有剪枝策略不控制路径拓展方向,因此提出局部代价阈值剪枝,控制路径的走向沿关键词顶点路径拓展,并综合运用近似支配、可行解目标值剪枝和全局优先拓展策略加速拓展。实验结果表明,在不损失精度的情况下,该算法执行时间分别在不同关键词个数、代价阈值与查询图规模下至少缩短8.0%、61.0%和57.7%。     

Anticipating Cutoff Diameters in Deterministic Lateral Displacement (DLD) Microfluidic Devices for an Optimized Particle Separation

Deterministic lateral displacement (DLD) devices enable to separate nanometer to micrometer‐sized particles around a cutoff diameter, during their transport through a microfluidic channel with slanted rows of pillars. In order to design appropriate DLD geometries for specific separation sizes, robust models are required to anticipate the value of the cutoff diameter. So far, the proposed models result in a single cutoff diameter for a given DLD geometry. This paper shows that the cutoff diameter actually varies along the DLD channel, especially in narrow pillar arrays. Experimental and numerical results reveal that the variation of the cutoff diameter is induced by boundary effects at the channel side walls, called the wall effect. The wall effect generates unexpected particle trajectories that may compromise the separation efficiency. In order to anticipate the wall effect when designing DLD devices, a predictive model is proposed in this work and has been validated experimentally. In addition to the usual geometrical parameters, a new parameter, the number of pillars in the channel cross dimension, is considered in this model to investigate its influence on the particle trajectories.     

Weight function,stress intensity factor and crack opening displacement solutions to periodic collinear edge hole cracks

Periodic collinear edge hole cracks and arbitrary small cracks emanating from collinear holes, which are two typical multiple site damages occurred in the aircraft structures, are studied by using the weigh function method. An explicit closed form weight function for periodic edge hole cracks in an infinite sheet is obtained and further used to calculate the stress intensity factor and crack opening displacement for various loading cases. Compared to finite element method, the present weight function is accurate and highly efficient. The interactions of the holes and cracks on the stress intensity factor and crack opening displacement are quantitatively determined by using the present weight function. An approximate weight function method is also proposed for arbitrary small cracks emanating from multiple collinear holes. This method is very useful for calculating the stress intensity factor for arbitrary small cracks.     

3D printing system: an innovation for small-scale manufacturing in home settings? – early adopters of 3D printing systems in China

This study investigates Chinese consumers’ adoption of the innovative 3D printing systems for small-scale manufacturing in home settings. Empirical studies were conducted in a survey with 256 participants. The number of significant determinants that affect an individual’s decision to adopt 3D printing systems has been identified by applying a model that integrates the Technology Acceptance Model and Innovation Diffusion Theory. A number of moderation effects of demographic variables (e.g. gender, design background) on the association between motivational variables and participants’ adoption have also been analysed with factor analysis, structural equation modelling and hierarchical regression. Our results shed some light on the characteristics of early adopters of home 3D printing systems in China. This study contributes to the early understanding of Chinese consumers’ adoption of innovative 3D printing systems.     

Computational homogenization of elasticity on a staggered grid

In this article, we propose to discretize the problem of linear elastic homogenization by finite differences on a staggered grid and introduce fast and robust solvers. Our method shares some properties with the FFT‐based homogenization technique of Moulinec and Suquet, which has received widespread attention recently because of its robustness and computational speed. These similarities include the use of FFT and the resulting performing solvers. The staggered grid discretization, however, offers three crucial improvements. Firstly, solutions obtained by our method are completely devoid of the spurious oscillations characterizing solutions obtained by Moulinec–Suquet's discretization. Secondly, the iteration numbers of our solvers are bounded independently of the grid size and the contrast. In particular, our solvers converge for three‐dimensional porous structures, which cannot be handled by Moulinec–Suquet's method. Thirdly, the finite difference discretization allows for algorithmic variants with lower memory consumption. More precisely, it is possible to reduce the memory consumption of the Moulinec–Suquet algorithms by 50%. We underline the effectiveness and the applicability of our methods by several numerical experiments of industrial scale. Copyright © 2015 John Wiley & Sons, Ltd.     

太阳能-空气光伏/光热一体化热泵热水系统实验特性

本文研究了一种新型光伏/光热一体化(PV/T)复合热源热泵热水系统,将多孔扁盒式PV/T集热板与空气源热泵相结合,根据不同控制方式组合成双热源并联、单太阳能和单空气能三种不同运行模式。在室外环境温度28.5℃下,将200 L 30℃热水加热到55℃,研究了加热时间、热水温度、COP等性能的变化规律,结果表明双热源并联运行模式下分别比单太阳能模式和单空气能模式的加热时间缩短了42%和54%,COP分别提高了32.78%和47.64%;同时实验研究了在夏季工况下将200 L水从9∶00循环加热到17∶00过程中系统热性能,探讨了太阳辐射强度、PV/T集热板温度对光电/光热效率的影响,通过实验对比可以得出在热电模式下系统的光电效率η_(pv)比单一光电模式平均高25.8%.     

Thermal,mechanical and drug release characteristics of an acrylic film using active pharmaceutical ingredient as non-traditional plasticizer

Abstract

The objective of this study was to investigate thermal and mechanical properties as well as in vitro drug release of Eudragit® RL (ERL) film using chlorpheniramine maleate (CPM) as either active pharmaceutical ingredient or non-traditional plasticizer. Differential scanning calorimeter was used to measure the glass transition temperature (T_g) of 0–100% w/w CPM in ERL physical mixture. Instron testing machine was used to investigate Young’s modulus, tensile stress and tensile strain (%) of ERL film containing 20–60% w/w CPM. Finally, a Franz diffusion cell was used to study drug release from ERL films obtained from four formulations, i.e. CRHP0/0, CRHP0/5, CRHP2/0 and CRHP2/5. The T_g of ERL was decreased when the weight percentage of CPM increased. The reduction of the T_g could be described by Kwei equation, indicating the interaction between CPM and ERL. Modulus and tensile stress decreased whereas tensile strain (%) increased when weight percentage of CPM increased. The change of mechanical properties was associated with the reduction of the T_g when weight percentage of CPM increased. ERL films obtained from four formulations could release the drug in no less than 10?h. Cumulative amount of drug release per unit area of ERL film containing only CPM (CRHP0/0) was lower than those obtained from the formulations containing traditional plasticizer (CRHP0/5), surfactant (CRHP2/0) or both of them (CRHP2/5). The increase of drug release was a result of the increase of drug permeability through ERL film and drug solubility based on traditional plasticizer and surfactant, respectively.     

Development of a water-in-oil-in-water multiple emulsion system integrating biomimetic aqueous-core lipid nanodroplets for protein entity stabilization. Part II: process and product characterization

The aqueous-core enclosed in lipid nanoballoons integrating multiple emulsions of the type water-in-oil-in-water mimic, at least in theory, the environment within viable cells, thus being suitable for housing hydrophilic protein entities such as bioactive proteins, peptides and bacteriophage particles. This study reports a complete physicochemical characterization of optimized biomimetic aqueous-core lipid nanoballoons housing hydrophilic (BSA) protein entities, evolved from a statistical 2³×3¹ factorial design study (three variables at two levels and one variable at three levels) that was the subject of the first paper of a series of three, aiming at complete stabilization of the three-dimensional structure of protein entities attempted via housing the said molecular entities within biomimetic aqueous-core lipid nanoballoons integrating a multiple (W/O/W) emulsion. The statistical factorial design followed led to the production of an optimum W/O/W multiple emulsion possessing quite homogeneous particles with an average hydrodynamic size of (186.2?±?2.6) nm and average Zeta potential of (?36.5?±?0.9) mV, and exhibiting a polydispersity index of 0.206?±?0.014. Additionally, the results obtained for the diffusion coefficient of the lipid nanoballoons integrating the optimized W/O/W multiple emulsion were comparable and of the same order of magnitude (10^?12 m² s^?1) as those published by other authors since, typically, diffusion coefficients for molecules range from 10^?10 to 10^?7 m² s^?1, but diffusion coefficients for nanoparticles are typically of the order of magnitude of 10^?12 m² s^?1.     

Multiple Comparisons with the Best for Process Selection for Linear Profiles with One‐sided Specifications

In this study, we propose the multiple comparisons with the best method based on the yield index to compare the process yields of K (K ≥ 2) suppliers for linear profiles with one‐sided specifications. The performance analysis of the proposed method is conducted. The numbers of profiles required for different power levels are also provided. A simulated data set from a leather dyeing process is presented to illustrate the applicability of the proposed method. Copyright © 2015 John Wiley & Sons, Ltd.