Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

高功率板条固体激光器研究的进展

本文对高功率板条固体激光器研究的进展和应用前景作了综合评述。结合作者部分工作,对板条激光器的热效应、聚光器和光学谐振腔等关键问题和技术进行了物理分析。     

Effect of crack-growth mechanism on the prediction of fracture load of adhesive joints

This paper presents observations regarding the cracking behavior of tensile-loaded structural adhesive joints. Experiments showed that fracture occurred by the development and propagation of a damage zone, rather than a single, sharp crack, and that the presence of the adhesive spew fillet did not affect the fracture load of the adhesive joints studied. For joints bonded with the mineral-filled epoxy Cybond 4523GB (American Cyanamid), there was approximately 5 mm of subcritical crack propagation prior to final fracture. Fracture-load predictions based on the initial uncracked geometry made in previous papers were unaffected by this small change in geometry. For joints bonded with the rubber-toughened epoxy Permabond ESP 310, approximately 50 mm of subcritical crack propagation was observed. It was again found that predictions made in previous papers on the basis of the initial geometry gave a good estimate of the final fracture load even though this subcritical crack propagation significantly altered the geometry, and thus the applied energy release rates. The effect of shear deformations of the adherends was also investigated, and it was found that shear deformations could be neglected in engineering calculations for joints subject to remote tensile loading.     

Thermomechanical fatigue—damage mechanisms and mechanism-based life prediction methods

An existing extensive database on the isothermal and thermomechanical fatigue behaviour of high-temperature titanium alloy EVII 834 and dispersoid-strengthened aluminum alloy X8019 in SiC particle-reinforced as well as unreinv conditions was used to evaluate both the adaptability of fracture mechanics approaches to TMF and the resulting predictive capabilities of determining material life by crack propagation consideration. Selection of the correct microstructural concepts was emphasised and these concepts were, then adjusted by using data from independent experiments in order to avoid any sort of fitting. It is shown that the cyclic /-integral (δJ_eff concept) is suitable to predict the cyclic lifetime for conditions where the total crack propagation rate is approximately identical to pure fatigue crack growth velocity. In the case that crack propagation is strongly affected by creep, the creep-fatigue damage parameter δ_CF introduced by Riedel can be successfully applied. If environmental effects are very pronounced, the accelerating influence of corrosion on fatigue crack propagation can no longer implicitly be taken into account in the fatigue crack growth law. Instead, a linear combination of the crack growth rate contributions from plain fatigue (determined in vacuum) and from environmental attack is assumed and found to yield a satisfactory prediction, if the relevant corrosion process is taken into account.     

高功率固体激光器

本文详细讨论了设计高平均功率固体激光器的有关问题,包括激光材料性质、棒状和板条状几何结构,聚光器和光学谐振腔等。分析表明,板条状几何结构固体激光器提供了达到千瓦级功率水平同时又保持良好光束质量的可能性。     

T-stress in orthotropic functionally graded materials: Lekhnitskii and Stroh formalisms

A new interaction integral formulation is developed for evaluating the elastic T-stress for mixed-mode crack problems with arbitrarily oriented straight or curved cracks in orthotropic nonhomogeneous materials. The development includes both the Lekhnitskii and Stroh formalisms. The former is physical and relatively simple, and the latter is mathematically elegant. The gradation of orthotropic material properties is integrated into the element stiffness matrix using a “generalized isoparametric formulation” and (special) graded elements. The specific types of material gradation considered include exponential and hyperbolic-tangent functions, but micromechanics models can also be considered within the scope of the present formulation. This paper investigates several fracture problems to validate the proposed method and also provides numerical solutions, which can be used as benchmark results (e.g. investigation of fracture specimens). The accuracy of results is verified by comparison with analytical solutions.     

基于不同爆轰产物的格尼速度估算新方法（英）

A new method for prediction of Gurney velocity of explosives is introduced in which energy output is correlated with the heat of detonation, the number of moles of gaseous products of detonation per gram of explosive and the average molecular weight of gaseous products. It is assumed that the CHNO explosive reacts to form products composed of N2 , CO, H2O, CO2, H2,O2 and C（s） as determined by the oxygen balance of the unreacted compound. Good agreement is obtained between measured and calculated values of Gurney velocity as compared to previous correlations which assumed the reaction products to consist of N2 , H2O, CO2 and either C（s） or O2.     

History of the stiffness method

This paper presents a brief history of the development of the stiffness method. We start by tracing the evolution of the method to solve discrete‐type problems such as trusses and frames composed of two node members. We then describe the method as it is applied to solve continuum problems modelled by finite‐difference and finite‐element methods. Copyright © 2006 John Wiley & Sons, Ltd.     

A physically based approach to granular media mechanics: grain-scale experiments,initial results and implications to numerical modeling

It is generally appreciated that the mechanical behavior of granular media depends fundamentally on the interaction of the constituent particles, and that the validity of numerical models of granular media would be greatly improved with knowledge of the grain-scale mechanics. However, most supporting experimental work has been conducted on highly idealized materials, and a limited amount of information exists on grain-scale force–displacement relationships for naturally occurring materials. To address this shortcoming, we are conducting a program that integrates laboratory experiments on grains of naturally occurring aggregate with the discrete element modeling method, with the goal of relating the grain-scale physical and mechanical properties of granular media to bulk behavior. The paper describes the equipment and methods that have been developed to conduct close-loop controlled, grain-scale experiments under monotonic and cyclic loading conditions, and presents results from an initial set of experiments on unbonded grains. The implications of the grain-scale results to the discrete element model are discussed. Discussions center on the applicability of a physically based approach to the mechanics of granular media in general. In light of future exploration missions and the resulting need to predict the mechanical properties of lunar and planetary regoliths, the paper examines the potential usefulness of our physically based approach to the problem of predicting the behavior of the types of materials found in those environments.     

短半径水平井铰链式井下动力钻具组合力学模型的建立与分析

铰链式井下动力钻具组合是当前短半径水平钻井中最先进的一种新型工具。本文首先建立了铰接式井下动力钻具组合在二维井身条件下的力学模型并介绍了该模型的求解方法和过程,详细分析了若干结构学数、井身几何参数和钻井工艺参数对钻头侧向力的定量影响,为铰接式井下动力钻具组合的结构设计和短半径水平井轨道控制提供了力学分析基础。