Experimental investigation of the normal spectral emissivity and other thermophysical properties of pulse-heated Ni-Ti and Au-Ni alloys into the liquid phase

1. Introduction Metal working industry needs accurate thermo- physical properties of liquid metals and alloys as input data for different simulation routines to im- prove the performance of their products. Within this paper we continue the systematic investigation of the dependence of emissivity of binary alloys on the relative concentration of the constituent elements (for a previous paper see [1]). 2. Experimental method A fast ohmic pulse heating technique is applied to heat metallic wire-s…     

带有块间串扰MC-CDMA的时域信道估计和多用户检测

本文把带有IBI的MC-CDMA系统等效解释为特殊的直接序列码分多址（DS-CDMA）系统，并给出了相应的时域信道估计方法和时域线性最小均方误差（MMSE）多用户检测方法。仿真实验表明了本文方法的性能。     

三代微光管均匀性测试与分析

利用自行研制的“光电阴极多信息量测试系统”首次对国产三代微光管中的GaAs光电阴极的均匀性进行了光谱响应测试 ,结果表明该国产三代微光管存在明显的非均匀性。利用曲线拟合方法估算了GaAs光电阴极的材料性能参数 ,发现表面逸出概率不一致是非均匀性的主要原因 ,GaAs材料的少子扩散长度 (1 1 2～ 1 82 ) μm ,与阴极厚度相当 ,后界面复合速率在 (1× 1 0 5～ 1× 1 0 6 )cm/s之间 ,它限制了阴极灵敏度的提高     

Spectral color reproduction minimizing spectral and perceptual color differences

In this article, we are combining minimization criteria in the colorant separation process for spectral color reproduction. The colorant separation is performed by inverting a spectral printer model: the spectral Yule‐Nielsen modified Neugebauer model. The inversion of the spectral printer model is an optimization operation in which a criterion is minimized at each iteration. The approach we proposed minimizes a criterion defined by the weighted sum of a spectral difference and a perceptual color difference. The weights can be tuned with a parameter α ∞ [0, 1]. Our goal is to decrease the spectral difference between the original data and its reproduction and also to consider perceptual color difference under different illuminant conditions. In order to find the best α value, we initially compare a pure colorimetric criterion and a pure spectral criterion for the reproduction, then we combine them. We perform four colorant separations: the first separation will minimize the 1976 CIELAB color difference where four illuminants are tested, the second separation will minimize an equally weighted summation of 1976 CIELAB color difference with the four illuminants tested independently, the third colorant separation will minimize a spectral difference, and the fourth colorant separation will combine a weighted sum of a spectral difference and one of the two first colorimetric differences previously introduced. This last colorant separation can be tuned with a parameter in order to emphasize on spectral or colorimetric difference. We use a six colorants printer with artificial inks for our experiments. The prints are simulated by the spectral Yule‐Nielsen modified Neugebauer model. Two groups of data are used for our experiments. The first group describes the data printed by our printing system, which is represented by a regular grid in colorant space of the printer and the second group describes the data which is not originally produced by our printing system but mapped to the spectral printer gamut. The Esser test chart and the Macbeth Color Checker test chart have been selected for the second group. Spectral gamut mapping of this data is carried out before performing colorant separation. Our results show improvement for the colorant separations combining a sum of 1976 CIELAB color difference for a set of illuminants and for the colorant separation combining a sum of 1976 CIELAB color difference and spectral difference, especially in the case of spectral data originally produced by the printer. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 494–504, 2008     

Monitoring Power Dissipation for Fault Detection

In this paper, we suggest that the dynamic power dissipation of acircuit can be used for fault detection. Even those faults which do notaffect static power dissipation can be detected by monitoring dynamic powerdissipation. We discuss how stuck-at, stuck-open, and redundant faults maybe detected by monitoring dynamic power dissipation. In many cases, theFourier spectra of the supply currents in the good and faulty circuits willalso be very different. Further, specific tests can be applied so as toimprove fault coverage. Power monitoring is verified using simulation, andalso experimentally, for example circuits.     

新型染料敏化体系──荧光素染料碘鎓盐的光谱研究

本文合成了一系列荧光素类染料碘盐，并研究了其光谱及光化学性质。结果表明，通过改变结构，可改变它们的吸收光谱。提出可用Ｉ＿Ⅰ／Ｉ＿Ⅱ值来表征这类化合物在溶剂中的相对解离程度。随溶剂极性，染料母核Ｃ－６位周围（Ｃ－７，Ｃ－８位）空间位阻增大和染料母核上吸电子取代基增多，Ｉ＿Ⅰ／Ｉ＿Ⅱ值增大，它们的相对解离程度升高，光谱性质显著变化，光化学反应速度下降。在极性和非极性溶剂中，浓度对光谱和光化学性质具有不同的影响。显示这类化合物除可用作可见光敏化聚合和交联的光引发体系外，还可能用作探针探测周围环境的变化。     

Spectral approximations of the Stokes problem by divergence-free functions

The method of Moser, Moin, and Leonard (1983) for the approximation of the three-dimensional Navier-Stokes equations using divergence-free subspaces is revisited and analyzed. It is shown that the computed velocity field converges to the physical one with spectral accuracy. Moreover, a method for recovering the pressure field is proposed. This method is stable and provides a pressure that converges to the physical one with spectral accuracy.     

光纤光栅最佳切趾函数的研究

采用耦合模理论，给出了用传输矩阵法计算光纤Bragg光栅（FBG）特性的方法，进而得到了在不同切趾函数形式下的FBG反射谱的数值解。通过理论分析，给出了最佳切趾函数反射谱和群时延特性曲线。     

一种实用的内插FFT信号处理方法

基于信号样本可以重建信号频谱包络,本文提出一种简单、实用的内插方法,将此方法的有效性和FFT的优越性结合起来应用于细化频率分辨率,以适应需要获取信号较多频谱信息的应用场合。     

套管井自然伽马能谱测井资料的应用分析

自然伽马能谱测井是一种新的测井方法。该文主要针对胜利油田的多个油区的套管井自然伽马能谱测井资料的应用实例进行了分析，指出它在开发过程中对研究管外窜槽、注水层的吸水量、判断水淹层和划分水淹级别、划分储集层和判断储集层性质、划分油层中的泥岩夹层、确定泥质含量及粘土类型等方面的重要作用。在综合其它测井方法后，能对研究储层变化、寻找剩余油分布等提供重要的手段。