热分析在PVA纤维预处理中的应用

用差热、热重法对原丝的热性能及由不同预处理方法所引起的PVA纤维的热行为变化进行了研究;并通过模拟脱水条件,用不同升温速率,求出了经不同预处理纤维的脱水反应活化能。结果表明,PVA原丝在230℃有一软化点,三种预处理都不同程度地影响了原丝的热效应变化;纤维在180～340℃主要为脱水反应;原丝及经脱水剂、O_3和O_3综合脱水剂处理的纤维,其脱水反应的表观活化能分别为:164.3kJ/mol,92.9kJ/mol,130.5kJ/mol和117.6kJ/mol。     

MX345芯片及单片机控制

MX345芯片用于产生模拟信令—CTCSS单音.本文在介绍MX345编码/解码器工作原理的基础上,设计出MX345芯片与单片机的接口电路.最后给出控制软件.     

A Model for Flooding Prediction in Circular Tubes

Flooding phenomenon limits the stability and the flow of a liquid film falling along the walls of a channel in which a gas is flowing upwards.As known, the entrainment effect can completely prevent the liquid to fall from its natural flow. The present work proposes a new mechanistic model for the prediction of the onset of flooding in vertical and inclined pipes in the presence of obstructions, as well as taking into account the viscosity effect. The good performance of the model in the different geometrical conditions and for variable viscosities of the liquid component assesses the validity of the hypothesis that the instability of a wavelike disturbance limits the countercurrent flow in a channel.     

Process conditions for separating fatty acid esters by supercritical CO2

The solubilities of ethyl palmitate, ethyl oleate, ethyl eicosapentaenoate (EPA) and ethyl docosahexaenoate (DHA) in supercritical carbon dioxide were determined by a continuous flow method. The solubilities of fatty acid ethyl esters increased with pressure and decreased as the temperature was increased. An empirical equation, similar to Chrastil's equation, was used to describe the relationship between solute solubility and the density of carbon dioxide. The empirical equation was further used to qualitatively estimate the separation efficiency of isolating EPA and DHA ethyl esters from fatty acid esters. The operating conditions yielding high solubility gave fast extraction rate but resulted in low separation efficiency. Experiments were conducted to separate ethyl EPA and ethyl DHA from a model mixture containing four fatty acid ethyl esters and from esterified squid visceral oil. The experimental data compared closely with the calculated values.     

高放废液化学成分分析

概述了高放废液中25种阳离子、5种阴离子以及总蒸残物、总氧化物、密度和游离酸的分析方法。对核燃料后处理高放废液进行取样分析,其主要化学成分采用两种以上不同原理的方法作对比测定,结果相互符合情况良好,为高放废液处理处置研究设计,提供了完整、准确的基础数据。     

Field emission mechanism from nanocrystalline cubic boron nitride films

An electron-emission theoretical model integrating the change in the grain size of nanocrystalline cubic boron nitride (c-BN) thin films was established. To understand better the essence of field emission, an accurate numerical scheme, the transfer matrix method, that can be used to compute the tunneling coefficients of the actual surface barrier, was also adopted. The present results show that the emission current from nanocrystalline grain films is far larger than that from regular grain films or bulk c-BN.     

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

The authors of this paper synthesized a series of amphiphilic triblock copolymers of polystyrene-b-poly(ethylene glycol)-b-polystyrene (PS-PEG-PS) having different PEG/PS ratios with nearly identical molecular weights of the entire copolymers. The interfacial interactions in the composites consisting of carbon black and the copolymers can thus be tailored. When these conducting composites are exposed to certain solvent vapors, their electrical resistances greatly increase, showing the gas sensitivity. The present work indicated that this switching behavior is controlled by the structural relaxation of the composites because matrix swelling acts as the main mechanism. The response time has been correlated with absolute temperature by Arrhenius equation, and the estimated activation energy reflects mobility of the fillers involved in the solvent induced expansion of the surrounding polymer. Therefore, by using the gas sensibility of the conductive composites, the structure evolution of the composite materials in solid state and the effect of filler/matrix interfacial interaction on the relaxation property of the matrix polymer has been inspected. It was found that lower activation energy represents stronger interfacial interaction in case good solvent of the matrix was used for the test.     

Surface characteristics of fluorine-modified PAN-based carbon fibers

Different fluorination methods were applied to modify the surface properties of carbon fibers. The relationship between the degree of fluorination and the physicochemical properties of carbon fibers was studied using a combination of mechanical tests, elemental analysis (EA), X-ray photoelectron spectrometry (XPS), and X-ray diffraction (XRD). EA and XPS analyses of fluorinated carbon fibers showed that treatment with mixtures of F₂/O₂ introduced a much higher fluorine concentration than that with F₂ only. However, XRD analysis showed that there was no increase in the interlayer distance, due to the mild fluorination condition applied. Consequently, the oxyfluorination was one of the more effective methods to increase surface polarity of carbon fibers, which probably played an important role in improving the tensile properties of the fibers in the epoxy resin system.