TMS320VC54x处理器McBSP接口的设计和实现

以低速语音编解码系统为例．介绍了TMS320VC54x数字信号处理器的多通道缓冲串口的软硬件设计，给出了具体的设计思想和实现方法。     

有源介观RLC电路的量子波函数及其双波描述

用表象变换的方法求得了介观RLC电路的量子波函数，并由此求得了电荷和电流的量子涨落，同时又用双波函数方法研究了有源介观电路的量子效应。通过两种方法的比较可知，电路的量子涨落与所处的状态密切相关，这一点由双波函数方法清楚可见。用双波函数求得的电荷和电流的系综平均值正是用波函数求得的电荷和电流的期望值。     

3GPP中的协议一致性测试研究

随着 3G技术的进一步发展和成熟 ,现在电信和其他数据通信技术面临着一个进一步融合突破的时代。 3G的发展更推动了全球实现无缝漫游 ,互连互通的需求。这样就为全球的 3G设备制造商提出了更高的要求。但由于各协议实现厂家对协议的不同理解 ,通信设备的协议非一致性问题将日趋严重 ,为了检查各个不同生产厂家的实现是否与标准文本相一致 ,进而确保不同厂家的 3G协议实现之间能够互操作 ,一致性测试是非常必要的。文中根据笔者在 3GPP中T1信令组工作背景为基础 ,并以MAC部分测试结构和方式为例 ,给出了形式化的TTCN格式。全面的论述了 3GPP中的协议一致性测试过程     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.     

Routine Highway Bridge Inspection Condition Documentation Accuracy and Reliability

Routine inspection is the most common form of highway bridge inspection to satisfy the requirements of the National Bridge Inspection Standards. The accuracy and reliability of documentation generated during these inspections are critical to the allocation of Department of Transportation construction, maintenance, and rehabilitation resources. Routine inspections are typically completed using only the visual inspection technique and rely heavily on subjective assessments made by bridge inspectors. In light of this, and given the fact that visual inspection may have other limitations that influence its reliability, the Federal Highway Administration initiated an investigation to examine the reliability of visual inspection as it is currently applied to bridges in the United States. This paper will summarize results from this study related to the accuracy and reliability of routine inspection documentation. A number of important conclusions were developed from the experimental study. Generally, it was found that all structural condition documentation is collected with significant variability. Specifically, 95% of primary element condition ratings for individual bridge components will vary within two rating points of the average and only 68% will vary within one point. Documentation generally collected to support condition ratings also has significant variability as exemplified by the number and types of field notes and photographs taken by inspectors. With respect to the use of element-level inspections, it was found that element usage was generally consistent with the Commonly Recognized Element Guide. However, there is significant variability in the condition state assignments of those elements and in some cases the condition states are not applied correctly to particular elements.     

奥地利移动通信市场

移动通信市场已经成为奥地利竞争程度较高的市场,主要的4家移动运营商分别是Mobilkom,Max.Mobil,Connect Austria和Tele.ring,其中Mobilkom占有的市场份额最大,奥地利政府于2000年11月拍卖了6张国内3G许可证,除了上述4家运营商获得3G许可证之外,奥地利Hutchison 3G和3G Mobile也得到了3G牌照.     

涠洲11-4油藏聚合物驱聚合物性能评价及优选

针对涠洲11-4油藏温度和流体性质特征,通过收集国内外现有高性能抗盐和耐高温聚合物产品,对聚合物溶液的增粘性、稳定性、耐温性、抗盐性和抗剪切特性、阻力系数和残余阻力系数等进行了测试,并引入模糊综合评判方法,借以对不同品质聚合物溶液改善流度比或扩大波及体积能力做出全面和客观评价。实践证明,模糊综合评判是进行聚合物溶液优选的一种简洁和有效方法。通过对实验结果综合分析表明,在初选的几种聚合物中,“法国SNF”在综合评价中性能居优。     

属性识别理论在黄前水库水质评价中的应用

本文根据属性识别理论,探讨了水库水质的综合评价模型,应用此模型对黄前水库的水质进行评价,结果与灰色关联度法基本相同,比较符合实际情况。同时该方法简单、易懂,更适合于有标准的系统质量评价问题。     

我国WCDMA系统产业化现状及挑战

我国移动通信制造业在2G上晚了十年，未能取得相应的市场份额。但在3G领域，已经逐渐同步业界先进水平。如何改变现有市场格局，我国移动通信业面临全新的机会和重大的挑战，本就我国WCDMA系统产业化现状做了简要论述。