Vital-Fluorochromization of Microorganisms Using 3′,6′-Diacetylfluorescein to Determine Damages of Cell Membranes and Loss of Metabolic Activity by Ozonation

Cell suspensions of Escherichia coli as a model for bacterial populations in wastewaters were treated with ozone as a disinfectant in a continuously operated pilot plant with a plug flow reactor. Suspensions with an initial number of CFU (colony forming units) of 10⁸ mL^?1 were ozonized with ozone concentrations up to 12 mg/L. Metabolic activities and membrane functions break down with increasing ozone concentrations. The fluorochromization using 3′,6′-diacetylfluorescein (FDA) proved to be a suitable method for the detection of an alteration in permeability of the cell membranes and an inactivation of metabolic activity. By fluorescence microscopic and photometric investigations it could be clearly demonstrated that, in the case of disinfection with ozone, inactivation of the cells includes first of all a damage of the cell membranes. In contrast to the determination of the number of CFU, fluorochromization allows the detection of alteration in metabolic activities.     

焦炭反应性试验影响因素分析

针对梅山自产焦炭，利用梅山焦炭反应性试验设备，通过改变焦炭块数、CO2流量和温度等控制参数，讨论了这些参数对焦炭反应性和反应后强度检测值的影响，以及保证测定可靠性应采取的控制措施。     

低压低干度自然循环流量漂移和热虹吸现象的动态模拟

采用一维两相4方程漂移流模型编制程序,对5MW核供热堆模拟实验回路中发生的流量漂移现象进行数值模拟,同时分析热虹吸的机理,并对其进行动态模拟.结果表明,该程序可以对自然循环系统的静态不稳定性进行模拟,对流量漂移现象的模拟基本与实验相符.     

Axisymmetric extrusion through adaptable dies—Part 1: Flexible velocity fields and power terms

An adaptable die is one that not only produces the correct geometrical shape, but also is designed through an adaptable method to impart other desirable properties to the product or process. In this first part of a series of papers, six kinematically admissible velocity fields are developed for use in upper bound models for axisymmetric extrusion through various dies, including extrusion through adaptable dies. Three base velocity fields are presented:

(1) assuming proportional angles in the deformation zone,

(2) assuming proportional areas in the deformation zone, or

(3) assuming proportional distances from the centerline in the deformation zone.

The base velocity is modified by an additional term comprised of two functions. One function allows extra flexibility in the radial direction, and the second function allows extra flexibility in the angular direction. There are two forms of the second function, which meet the required boundary conditions. The flexibility function in the radial direction is represented by a series of Legendre polynomials, which are orthogonal over the deformation region. The power terms derived for these velocity fields for use in upper bound models are also presented.Part 2 of this series compares the results obtained in upper bound models for the six velocity fields for a spherical extrusion die. In Part 3, the use of the best velocity field for extrusion through streamlined dies is developed to determine the adaptable die shape, which minimizes the required extrusion pressure. Additionally, the adaptable die shape is compared with results from Yang and Han for arbitrarily curved and streamlined dies.     

自聚焦共焦探测系统轴向分辨率的影响因素

从微小内尺度测量角度出发，研究了针孔尺寸、探测器位置、透镜的数值孔径、放大倍率和杂散光等对自聚焦共焦式探测系统轴向分辨率的影响。结果表明，为提高系统的轴向分辨率，需将有效针孔尺寸控制在≤2.5；探测器需配以精密微调整装置以实现横向精确定位；选用差动共焦光路及大数值孔径和大放大倍率的自聚焦透镜，同时，偏振光路的使用将有效的提高系统的信噪比。     

Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

Reynolds number-dependent permeability of wastewater sludge flocs

Most theoretical models assume constant permeability of wastewater sludge floc. This work shows that, at creeping flow limit with small intrafloc Reynolds number, the permeability of floc can not only be affected by floc structure, but also by the external flow condition. The three-dimensional structure of flocs using the fluorescence in situ hybridization (FISH) and the confocal laser scanning microscope (CLSM) was firstly probed. Then, the volumetric grid models for sludge flocs were constructed. We noted that the floc permeability could keep unchanged, increased, or decreased at increased Reynolds number (Re). Flow redistribution among channels of various sizes contributes to the noted Re-dependent permeability of flocs.     

Shallow Turbulent Flows by Video Imaging Method

Shallow turbulent flows were produced in a tank of small thickness to study the friction effects on large-scale turbulent motion of small depth. The tank was constructed of two parallel walls. The space between the parallel walls (4.4, 1.57, and 0.59 cm) was small compared with the height (107 cm) and the width (212 cm) of the tank, and was varied during the experiments for different friction effects. Turbulent flows were produced by the injection of water in the form of starting jets into the tank filled with water. The large-scale turbulent flow in the small space between the walls of the tank is confined to essentially two-dimensional motion, and the motion is retarded by the force of friction. Dye was injected with the source fluid as the tracer for the highly unsteady and quasitwo-dimensional turbulent motion. From the initiation of the turbulent motion at the source to the final interaction of the jets with the tank bottom, the entire sequence of events was recorded by a pair of video cameras. The depth-averaged concentration of the dye was analyzed using the recorded video images.     

An optimization algorithm based on stochastic sensitivity analysis for noisy objective landscapes

A function minimization algorithm that updates solutions based on approximated derivative information is proposed. The algorithm generates sample points with Gaussian white noise, and approximates derivatives based on stochastic sensitivity analysis. Unlike standard trust region methods which calculate gradients with n or more sample points, where n is the number of variables, the proposed algorithm allows the number of sample points M to be less than n. Furthermore, it ignores small amounts of noise within a trust region. This paper addresses the following two questions: how does the derivative approximation become worse when the number of sample points is small? Can the algorithm find good solutions with inexact derivative information when the objective landscape is noisy? Through intensive numerical experiments using quadratic functions, the algorithm is shown to be able to approximate derivatives when M is about n/10 or more. The experiments using a formulation of the traveling salesman problem show that the algorithm can find reasonably good solutions for noisy objective landscapes with inexact derivatives information.     

GIS中矢量图形的结构分析与VC++中的实现

简要讨论了GIS各类矢量图形元素间的空间拓朴结构及基位置关系 ,并用VC 6 . 0及MFC具体分析了圆弧与多边形区域的相交关系及实现。为利用VC开发专用图形软件提供了有用帮助。