片式多层电容电阻复合元件的研制

采用低温共烧陶瓷(LTCC)技术将电容、电阻元件集成在多层陶瓷基板里,构成了一种新型的片式多层复合元件,并研究了其制造工艺性能和频率特性。结果表明,片式多层电容电阻复合元件制造工艺适合批量化生产,并为片式多层LC滤波器、LTCC基板及器件的研发提供了极好的参考价值。     

一种新型序分量高压线路保护选相元件

提出了一种利用零序与正负序之和的相对相位关系选相新原理。该原理通过零序与正负序之和的相对相位关系，并结合零序与负序相对相位关系进行接地故障相别的判断。该选相元件从原理上克服了以往序分量选相方法受过渡电阻影响较大的缺点，原理简单，理论分析和大量的现场数据验证表明能有效可靠地选出故障相别，是高压线路保护实现单相重合闸较为理想的选相元件。     

特高压输电线路负序方向纵联保护

采用数字式二阶RC低通滤波器和半波差分傅里叶算法，结合相序变换滤取负序分量，可在微机保护中实现负序方向元件，并可在故障初几毫秒内正确动作。用该方法实现的负序方向元件可正确及时地捕捉到由不对称故障发展起来的三相短路故障瞬间的不对称，故可以反映各种不对称故障和由不对称故障发展起来的三相故障。仿真试验验证了用所提出的方法实现的负序方向元件用于特高压输电线路的可行性和优越性。     

手势语言识别的神经网络方法

提供了一种用于人机交互（HCI）的手势语言可视化识别方法。该方法包括用于几种控制命令的手势的探测、分割、特征提取及识别，第一步的处理都用到了神经网络方法，像肤色探测、主元分析（PCA）以及在编码识别。实验结果显示正确识别率高达94％。     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

Effects of high molecular weight component on crystallization of polyethylene under shear flow

Crystallization of polyethylene (PE) blends of low and high molecular weight components under shear flow was studied using time-resolved depolarized light scattering (DPLS), focusing on effects of the high molecular weight component on the shish-kebab structure formation. Anisotropic two-dimensional scattering pattern due to shish-like structure formation was observed above a certain concentration of the high molecular weight PE. The threshold was about 2.5-3 times larger than the chain overlap concentration, suggesting an important role of entanglements of the high molecular weight component. On the basis of these results a gel-spinning-like mechanism for the shish-like structure formation has been proposed. The DPLS results also implied that the shish-like structure was mainly formed from the high molecular weight PE. This was confirmed by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS) measurements on an elongated PE blend of low molecular weight deuterated PE and high molecular weight hydrogenated PE (3 wt%).     

蜡晶改进剂对润滑油馏分中蜡组分结晶控制作用的研究

抚顺石油一厂通过大量试验和溶剂脱蜡装置的连续生产证明:加工减二线,套管易上压,滤机上蜡饼泡松易堆蜡,应选用合适的改进剂以控制蜡晶生成树枝状;减四、五线重馏分蜡晶细密,套管不易上压,滤机易失效,应选用和适当加入合适的改进剂以增大聚集状晶体粒度;减三线蜡晶粒度大,为套管上压周期较长,滤机上蜡饼通透性好,滤速快,可根据需要决定是否使用改进剂。提出了针对不同润滑油馏分中不同蜡晶型选用合适的蜡晶改进剂可以相应解决不同馏分的生产难点,提高处理能力,改善产品质量。     

基于主元分析的多变量统计过程的故障辨识技术

为了更好的进行故障检测与诊断，介绍了主元分析理论，给出了基于主元分析的过程故障辨识机理及策略。仿真实例表明，利用此方法建立的故障诊断模型，能够在不依赖过程机理的前提下高效抽取原始数据空间的主要变化信息，对过程的非正常变化做出反应，同时还能较正确地找出发生故障的原因以及相应环节。     

构件重用技术在雷达软件中的应用

随着雷达软件系统技术的发展 ,软件规模、复杂度也越来越大 ,对开发、调试、功能升级等带来难度。文中提出了利用构件技术开发雷达软件系统的思想 ,并给出利用构件技术研制雷达软件系统的基本思路     

CIMS中零件加工特征分类研究

根据某大型制造企业的实际情况，阐述了定义加工特征的依据，给出了零件加工特征的定义及其组成。把加工特征作为对象，提出了分类的原则和面向对象分类方法。对该企业当前生产的零件上所具有的加工特征进行了分类，建立了相应的加工特征对象类树。