Reconfigurable Microstrip Patch Antenna with Switchable Polarization

A novel reconfigurable microstrip patch antenna with frequency and polarization diversities is proposed. A U‐slot is incorporated into a square patch, and a PIN diode is utilized to switch the slot on and off, which realizes the frequency diversity characteristic. The polarization diversities among linear polarization (LP), right‐hand circular polarization (RHCP), and left‐hand circular polarization (LHCP) are also obtained by switching three PIN diodes on the slot and the truncating corners of a square patch on and off. The antenna design and experimental results are presented.     

V型天线的行波加载公式

本文研究了ｖ型天线上电流分布与阻抗加载的关系，导出了支持天线上行波电流的阻抗加载公式。讨论了天线张角、振子半径以及振子长度与加载量的关系和规律，说明了加载Ｖ型天线的宽带特性。文中还计算了在高斯脉冲激励下，不同加载量的天线上瞬态电流的分布，由此可以表明所导加载公式的正确性与重要性。     

A novel frequency-selective metamaterial to improve helix antenna

A novel frequency-selective metamaterial with negative permittivity and permeability for improving directivity and gain of a helix antenna is presented in this paper.The proposed metamaterial is composed of two Z-shape resonators printed on opposite sides of a dielectric substrate.Two forms of multilayered cells are found to be suitable for antennas and waveguides applications.In addition,a new method of designing a metamaterial-based helix antenna is presented with high directivity and gain.A comparison on radiation properties is given between the conventional and the new metamaterial-based helix antennas.Two comparisons on radiation properties are performed:(1) the effect of proposed Z-structure on monopole,dipole,and helix antennas;(2) the effect of OE3,split-ring resonator (SRR),and proposed Z-structure unit cells on the performance of helix antennas.The results show improvement of parameters such as directivity,gain,and radiation power of the new metamaterial-based helix antenna.Therefore,the combination of Z-structure with the helix antenna shows the best performance.     

多用户MIMO系统低复杂度收发联合波束成形方案

基于多用户多输入多输出(MIMO)有限反馈系统提出了一种收发联合波束成形方法。该方法在发送端采用每个用户酉速率控制(PU2RC)波束成形技术,在接收端采用基于信干噪比(SINR)最大化的天线合并算法。天线合并算法利用用户SINR的广义Rayleigh熵特性寻找最佳的天线合并矢量。仿真结果表明,该方法能充分利用信道信息,不仅改善了传统PU2RC系统的和速率性能,相对于已有的迫零(ZF)联合波束成形方法,对信道状态信息的量化误差的敏感性更低,用户选择算法的复杂度更低,且低速率反馈条件下和速率性能更优。     

A uniplanar printed antenna with an inverted L‐shaped coupling feed for LTE/GSM/DCS/PCS/UMTS operations

A novel uniplanar printed antenna with a total size of 115 × 40 mm² is proposed for mobile device application. By using an inverted L‐shaped feeding mechanism and a meandered shorting strip, a dual‐band operation with wideband characteristic can be achieved. Here, the lower operating band is able to cover the LTE 700 and GSM 850/900 operations, while the higher operating band allows DCS 1800, PCS 1900, UMTS, and LTE 2300 operations. Furthermore, in order to increase the bandwidth of the higher operating band so that LTE 2500 operation can also be covered, an additional parasitic stub is attached to the feed line to excite a resonant frequency at around 2.72 GHz. Parametric studies via simulation are carried out, and prototype of the proposed antenna is also experimentally investigated to validate the simulated results. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Multilayered substrate integrated waveguide 4 × 4 butler matrix

In this article, a multilayered substrate integrated waveguide (SIW) Butler matrix beam‐forming network is proposed, designed, and demonstrated at 24 GHz for automotive radar system applications. The proposed low‐cost SIW structure can be used to develop a highly integrated multibeam antenna platform in automotive radar systems and other applications. In this structure, an SIW H‐plane coupler is optimized with an H‐plane slit to provide the required phase shift. A class of SIW E‐plane 3‐dB couplers in doubled layer substrate are studied and designed as the fundamental building blocks to avoid crossovers usually required in the construction of a Butler matrix. A 4 × 4 matrix is investigated and designed, which shows excellent performance over 22–26 GHz frequency band. Two types of antenna are tested with the proposed matrix scheme. First, an antipodal linearly tapered slot antenna (ALTSA) is incorporated into the Butler matrix to verify the broadband performances. Second, a longitudinal slotted waveguide antenna array is examined to generate radiation patterns in the broadside direction. Measured results agree well with simulated counterparts, thus validating the proposed multilayer SIW design concepts. In the next sections, the use as feeding networks for providing the reconfigurability operation of an antenna will be illustrated. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2012.     

WSUS补丁分发系统在医院内网中的应用

针对与互联网物理隔离的医院内网计算机操作系统无法自动更新的问题,提出应用微软的免费软件WSUS来实现医院内网计算机补丁自动更新。通过对WSUS系统在医院内网中的部署和应用的详细介绍,为有效地避免因系统漏洞引起的病毒爆发和恶意攻击提供了一种思路,在减少维护工作量的同时也提高了医院内网的安全性。     

Design of the broadband microstrip array antenna for blast furnace surface monitoring

Aiming at the requirements of high-resolution imaging and high integration of the blast furnace radar,this paper presents a method for designing a wideband microstrip array antenna,which broadens the antenna bandwidth through the design of parasitic patches and air layers.By combining multi-input multi-output (MIMO) radar and synthetic aperture radar (SAR) imaging principles,a linear MIMO array is designed,and a near-field simulation imaging experiment is performed on the simulated feed line through the wave number domain imaging algorithm.Simulation results show that the gain of the main lobe of the antenna can reach 14.05 dBi,the reflection coefficient is less than -10 dB,the absolute bandwidth is 5.25 GHz,the operating frequency is 20.67~25.92 GHz,and the range resolution is increased to 3 cm compared with the existing blast furnace radar.The average error of the azimuth direction of the simulated material line imaging is 0.008 m,and the range direction is 0.0011 m.Compared with the traditional microstrip array antenna,this antenna effectively widens the bandwidth,and the range resolution is higher than that of the traditional blast furnace radar.It can accurately obtain the shape information on the simulated material line,and has an engineering application value for blast furnace surface monitoring.     

大型非周期相控阵天线协同设计

针对大型非周期相控阵天线的特点,提出一种多学科、多领域协同设计的方法。然后运用该方法指导两个产品天线设计,围绕协同设计的典型流程和几个关键控制点展开论述。在测试阶段实测天线的主要指标,天线1辐射端面平面度≤1.4 mm,栅瓣电平≤-20 dB,天线2辐射端面平面度≤1.1 mm,栅瓣电平≤-18 dB,实测数据与仿真结果吻合,各项指标优于设计输入要求,使用性能良好,验证协同设计方法的有效性。最后指明大型非周期相控阵天线协同设计的进一步研究方向。     

复合材料夹层结构产品固化变形分析

本文讨论产生复合材料产品固化变形的主要原因是树脂收缩引起的各方向上不同的线膨胀系数具体分析了复合材料夹层结构的的固化变形，经技术上的改进解决了固化变形，以满足产品的设计要求。