基于微机的PUMA262机器人的离线编程系统

本文论述了一个离线编程系统开发的全过程，包括系统的设计和该软件的核心技术，ＰＵＭＡ机器人的运动学动力分析与仿真，机器人与微机的接口技术及ＮＵＲＢＳ高级曲线的路径规划方法等。     

COLLISION DETECTION AMONG MOVING OBJECTSIN MACHINING PROCESS SIMULATION

ＣＯＬＬＩＳＩＯＮＤＥＴＥＣＴＩＯＮＡＭＯＮＧＭＯＶＩＮＧＯＢＪＥＣＴＳＩＮＭＡＣＨＩＮＩＮＧＰＲＯＣＥＳＳＳＩＭＵＬＡＴＩＯＮＹａｎｇＨｅｍｉｎｇ；ＬｕＡｎｓｈｅｎｇ；ＺｈｏｕＪｉＣＯＬＬＩＳＩＯＮＤＥＴＥＣＴＩＯＮＡＭＯＮＧＭＯＶＩＮＧＯＢＪＥＣ...     

模拟信号的恢复及其误差研究

数模混合仿真中模拟信号的恢复及其误差对整个仿真过程具有重要影响。本文探讨了用零阶保持和一阶保持进行信号恢复的方法，比较了它们的误差及工作特点。特别指出了一阶保持中，由于存在积分器复原时间及数字机操作时间的影响而会带来附加的误差，因此一阶保持方法较难达到其理论的精度。     

给水流量控制系统仿真辅助设计

本文将给水流量系统规范化，给出静、动态数学模型，通过计算机仿真计算建立起设计参数Ｓ与系统特性间关系数据库，这些数据可用于控制系统辅助设计。本文还介绍了在Ｓ较小时自动补偿系统增益和时间常数的自适应控制方法并给出仿真结果。     

人工关节试验机电液力伺服控制系统迭代学习控制策略仿真

本文首先介绍了人工关节试验机电液力伺服控制系统的构成，并分析了其静特性。针对力系统的特性，本文提出了一种闭环比例型一阶给定超前迭代学习控制算法，并对其控制效果进行了仿真研究。研究结果表明，采用迭代学习控制算法可以有效地提高力系统的跟随精度。     

专用汉字库在仿真系统中的应用

本文介绍了一种专用汉字库的建立与管理方法，由该方法建立的汉字库具有使用灵活、维护方便、占用内存少、显示速度快等特点。它不仅用于计算机仿真系统，也可用于其它计算机应用系统。     

Efficient simulation of hierarchical stochastic activity network models

Stochastic extensions to Petri nets have gained widespread acceptance as a method for describing the dynamic behavior of discrete-event systems. Both simulation and analytic methods have been proposed to solve such models. This paper describes a set of efficient procedures for simulating models that are represented as stochastic activity networks (SANs, a variant of stochastic Petri nets) and composed SAN-based reward models (SBRMs). Composed SBRMs are a hierarchical representation for SANs, in which individual SAN models can be replicated and joined together with other models, in an iterative fashion. The procedures exploit the hierarchical structure and symmetries introduced by the replicate operation in a composed SBRM to reduce the cost of future event list management. The procedures have been implemented as part of a larger performance-dependability modeling package known asUltraSAN, and have been applied to real, large-scale applications. This work was supported in part by the Digital Equipment Corporation Faculty Program: Incentives for Excellence.     

三峡水库减淤增容调度方式研究——多汛限水位调度方案

本文建议在汛期中小流量时（Q<35000m3/s），将坝前水位维持在148～151m；出现汛情且流量更较大后，将坝前水位降低到143m；入库流量大于35000m3/s且短期预报将出现大于十年一遇洪水时，预泄洪水到135m.按这一调度，汛期约80％时间可以维持在较高水位，一般洪水期。汛限水位143m不影响坝区通航，135m水位迎洪可大量增加防洪库客。到100年后可减淤30亿m3，增加防洪库容约40亿m3.变动回水区减淤40%，优化了坝区水沙搭配，可改善通航条件。降低库区洪水位，缓解防洪与移民的矛盾。可对发电带来较大好处：提高发电效益，减少粗沙过机。初期水库排沙比大于原方案，可减轻下游冲刷。同时，可减小三峡汛初泄水与鄱阳湖防洪的矛盾。     

A Linear Cross-Coupled Control System for High-Speed Machining

We present a linear cross-coupled controller to improve highspeed contouring accuracy independently of tracking accuracy in a biaxial machine tool feed drive servomechanism. Unlike conventional cross-coupled controllers, the cross-coupled controller presented here is a linear system, so it is very easy to perform the stability and steady-state error analysis, and to optimise the controller parameters. The proposed controller is evaluated experimentally on a CNC LOM machine and compared to an uncoupled controller and a conventional cross-coupled controller. Controller performance is evaluated for a circular contour at a feedrate of 30 m min _1 . The experimental results show that the proposed controller can greatly reduce the contour error at large feedrates. The linear cross-coupled controller is simple to implement and is practical.     

控制棒驱动机构常温通风均匀性试验研究（续篇）

本文叙述控制棒驱动机构在常温通风均匀性方面的试验。通过平顶型堆顶结构和球面型堆顶结构通风均匀性试验的比较,找出通风的阻力、风速和不均匀系数间的规律。