Effects Of Ozone On The Production Of Biodegradable Dissolved Organic Carbon (BDOC) During Water Treatment

This article deals with the oxidation effect of ozone on the increasing fraction of biodegradable organic matter with the “ozotest” method, a laboratory technique which simulates the effect of ozonation and allows a complete oxidation assessment. Ozone treatment was performed on river water samples and sand filter effluent samples. Ozone consumption, reduction of UV absorbance and BDOC formation were monitored with applied ozone doses from 0 to 10 mg/L and with contact times from 0 to 60 min. The BDOC formation was optimum at an applied ozone dose of 0.25-0.5 mg O₃ per mg DOC (contact time = 5 min) corresponding to apparition of traces of residual ozone and maximum UV reduction. Maximum ozone consumption, UV reduction and BDOC formation occurred simultaneously during the first two minutes of treatment. Concerning BDOC formation, applied ozone dose showed a greater effectiveness than contact time. For the same quantity of consumed ozone, a short contact time associated with a high ozone dose was preferable to a long contact time and a low ozone dose.     

Kinetic study of the curing behavior of bismaleimide modified with diallylbisphenol A

The curing kinetics of bismaleimide modified with diallylbisphenol A were investigated for different ratios of 1,1′‐(methylene di‐4,1‐phenylene) bismaleimide and diallylbisphenol A with differential scanning calorimetry. Multiheating‐rate and isothermal methods were used to study the kinetics of the curing process. The results indicated that the activation energy changed with the extent of conversion. The activation energy obtained by the multiheating‐rate method was higher than that obtained by the isothermal method. Two kinetic models (autocatalytic and nth‐order) were successfully used to model the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2229–2240, 2003     

热固性树脂微波固化研究进展

综述了近年来热固性树脂及其复合材料的微波固化研究进展,重点讨论了热固性树脂微波固化与加热固化的比较,热固性树脂微波固化工艺,颗粒、纤维增强树脂基复合材料的微波固化研究。研究发现微波固化和热固化在本质上是相同的,然而,微波极大地加速了固化进程,对体系性能无损害;加入无机、金属填料以及纤维可以改变体系介电性能,控制微波工艺对材料进行精加工。最后介绍了微波热效应原理,并展望了微波热固化技术发展与应用。     

UV涂料在户外的应用

本文简述了辐射固化技术的发展历史，回顾了我国辐射固化涂料的发展状况，介绍了户外用UV涂料的特点、制备及国外最新进展。     

Potential of microbial growth control in water hydraulic systems by UV‐irradiation and filtration

Water hydraulic systems use water as a pressure medium and, thus, do not pose such adverse environmental impacts as oil hydraulics. Microbial deterioration of the pressure medium and biofouling of the surfaces restrict the applicability of the water‐based technology. The potential of microbial growth control by UV‐irradiation and filtration was studied in a pilot‐scale water hydraulic system. The UV‐irradiation (25 m Ws cm^?2) of the pressure medium reduced the total viable counts of bacteria by 1–2 log₁₀ cfu cm^?3, whereas the total microbial cell numbers and the numbers of surface‐attached microorganisms remained unaffected. Prefiltration (1.2 µm, absolute) of the pressure medium decreased the total microbial cell number in the water phase and retarded the attachment of bacteria. The filtration during the operation (2 µm, absolute) decreased the total numbers of microbial cells and the total viable counts in the pressure medium, and microbial attachment on the surfaces. Microbial attachment was not prevented by filtration. The microbial water quality obtained by pre‐ and on‐line filtration of the pressure medium was sufficient to ensure the long‐term operation of the water hydraulic system assuming that clean work practices are complied with in assembly and during the operation. © 2002 Society of Chemical Industry     

改性蓖麻油制备UV光固化涂料的研究

研究了改性蓖麻油制备UV光固化涂料。由蓖麻油、环氧丙烯酸树脂UVR6100、光引发剂UVI6990制得的涂料具有优良的光泽、良好的柔韧性、良好的附着力与硬度，且当改性蓖麻油含量为40％时，漆膜性能最为优良。     

榫边扣合管状密闭输送带的制作及其质量优化

对用于制药、精细化工、建材业等输送松散及粉、粒物料不污染环境的榫边扣合管状密闭输送带的结构特点、技术要求、制造工艺和优化制品质量的技术措施及效果进行了实验探讨。     

氟橡胶-金属粘接用环氧胶固化动力学研究

采用具有高热变形温度的砜类聚合物制备的增粘剂,配制了可用于氟橡胶与金属粘接的环氧胶粘剂,通过凝胶时间的测定、差式扫描量热法(DSC)和傅立叶变换红外光谱(FTIR)研究了胶粘剂的固化反应过程及动力学。结果表明,胶粘剂在固化反应过程中有一个宽广且平缓的放热峰,对固化十分有利。胶粘剂固化反应表观活化能为63.8 kJ/mol,固化反应级数为0.891。     

多官能度聚氨酯丙烯酸酯的合成及性能研究

采取两步法合成了高官能度聚氨酯丙烯酸酯,用实时红外光谱研究了多官能度聚氨酯丙烯酸酯的光聚合动力学,并研究了多官能度聚氨酯丙烯酸酯与其它单体配方的机械性能。研究发现随着丙烯酸官能度的增多,双键转化率也随之降低;官能度的增加会提高漆膜的硬度。     

O3+UV高级氧化杀菌系统在瓶装饮用纯净水中的应用

O3+UV高级氧化系统由于产生具有很强氧化能力的·OH自由基,具有很强的杀菌能力.本研究应用该组合工艺消毒技术,对瓶装饮用纯净水生产消毒进行了研究.结果表明,在该组合工艺中,O3投加量控制在0.1 mg/L,可彻底杀灭瓶装饮用纯净水中的细菌,并具有较长的保质期.该组合工艺消毒的优点是不仅节省成本,而且可保持瓶装水较好口感.O3+UV高级氧化消毒系统是瓶装水较好的消毒方法,值得推广与应用.