中国人丙型肝炎病毒全长NS3基因的克隆、序列分析及表达

目的　为改进HCV试剂的质量克隆 1b型丙型肝炎病毒 (HCV)全长NS3基因并在原核细胞中表达。方法　用RT PCR方法从中国人血清中扩增全长NS3片段 ,进行序列分析 ,并克隆到pET3 0a(+)原核表达载体中 ,构建的原核表达载体pET NS3 180 0在大肠杆菌BL2 1(DE3 )中表达 ,用Westernblot方法进行验证。结果　扩增到 1b型HCV全长NS3片段 ,经Westernblot实验表明该片段具有抗原活性。结论　构建的质粒可在大肠杆菌中表达完整的NS3蛋白     

麝香草酚和二磺酸酚分光光度法测定NO-3-N的比较

文章对两种测定NO3^-－N的方法从灵敏度、去Cl^-、NO2^-的干扰能力及实际操作作了比较，并提出了用麝香草酚测定NO3^--N应注意事项。     

Ni/Al_2O_3覆膜方法

阐述了Ni/Al2 O3 复合颗粒在生产中的应用 ,讨论了在Al2 O3 陶瓷颗粒上形成Ni膜的三种方法 ,分析了这些方法的优缺点。     

rGO-SnO2纳米复合物制备及室温下NH3气敏性能

采用沉淀-焙烧法制备了室温下对NH3具有高灵敏度和高选择性的rGO-SnO2纳米复合材料。利用X射线衍射（XRD），傅里叶红外光谱（FTIR），X射线光电子能谱（XPS），扫描电子显微镜（SEM），透射电子显微镜（TEM）和比表面积（BET）表征分析了纯SnO2与rGO(1.0%)-SnO2纳米复合物的属性。与纯SnO2相比，rGO(1.0%)-SnO2纳米复合物中SnO2晶体尺寸较小，约为6~20nm，比表面积更大，为33m2/g；rGO(1.0%)-SnO2纳米复合材料对0.01% NH3的灵敏度达到了49.6%，是相同NH3浓度下纯SnO2灵敏度的2.1倍，并且响应和恢复时间分别为21s和204s，比纯SnO2缩短了24s和10s，具有良好的重复性，选择性与稳定性；rGO(1.0%)-SnO2纳米复合材料优良的气敏性能是由rGO与SnO2产生的p-n异质结以及溶解的NH3电离出导电离子共同作用的结果。     

甲苯稀释对AlCl3-EMIC型离子液体电镀铝工艺氢脆性的影响

采用甲苯作为AlCl3-EMIC(1-乙基-3-甲基咪唑)型离子液体的稀释剂,其中纯态离子液体由物质的量比为2∶1的无水AlCl3和EMIC组成。对比了纯态和按稀释剂与离子液体体积比为1∶1稀释后电镀铝的外观、微观形貌和氢脆性。结果表明,采用甲苯稀释离子液体虽然可以降低镀液的黏度,改善镀层外观和微观形貌,但对离子液体电镀铝工艺的氢脆性有负面影响。     

Three-dimensional modelling of Non-Newtonian fluid flow in a coat-hanger die

The three-dimensional model of isothermal flow of power-law fluid in a coat-hanger die has been developed using finite element method. The shape of coat-hanger die used in the present model was determined according to the previous analytical design equation which is based on one-dimensional flow model in the manifold and the slot. Because uniform flow rate across the die outlet is most important to achieve uniform thickness of extruded polymer sheet or film, flow rate distribution is mainly examined to determine the valid process condition for the design equation as the design parameters are changed. The effects of fluid property in terms of power-law index and process parameters not considered in one-dimensional design equation such as die inlet size and the presence of land were analyzed. Results show that the manifold angle is the most influencing design parameter on flow rate distribution. When the material of different power-law index from design value is processed, the change of power-law index affects the uniformity of flow rate appreciably.     

糠醛加氢制糠醇中γ-Al2O3负载Cu-Zn催化剂的改性研究

采用浸渍法制备Co改性γ-Al₂O₃负载的Cu-Zn催化剂，考察Cu-Zn负载量、Co含量及反应温度等对催化剂性能的影响。结果表明，在413 K、氢气流速0.5 mL·s^－1 和糠醛空速2 h^-1 条件下,当催化剂Cu-Zn/γ-Al₂O₃（Co）中n(Cu)∶n(Zn)∶n(Al)∶n(Co)＝1.0∶2.0∶3.0∶0.51时，糠醇的选择性100％，糠醛转化率94.6％，比使用单纯Cu-Zn/γ-Al₂O₃催化剂的最佳转化率提高11％。     

Isomerization of n-hexane over mono- and bimetallic Pd–Pt catalysts supported on ZrO2–Al2O3–WOx prepared by sol–gel

The catalytic performance of mono- and bimetallic Pd (0.6, 1.0 wt.%)–Pt (0.3 wt.%) catalysts supported on ZrO₂ (70, 85 wt.%)–Al₂O₃ (15, 0 wt.%)–WO_x (15 wt.%) prepared by sol–gel was studied in the hydroisomerization of n-hexane. The catalysts were characterized by N₂ physisorption, XRD, TPR, XPS, Raman, NMR, and FT-IR of adsorbed pyridine. The preparation of ZrW and ZrAlW mixed oxides by sol–gel favored the high dispersion of WO_x and the stabilization of zirconia in the tetragonal phase. The Al incorporation avoided the formation of monoclinic-WO₃ bulk phase. The catalysts increased their S_BET for about 15% promoted by Al₂O₃ addition. Various oxidation states of WO_x species coexist on the surface of the catalysts after calcination. The structure of the highly dispersed surface WO_x species is constituted mainly of isolated monotungstate and two-dimensional mono-oxotungstate species in tetrahedral coordination. The activity of Pd/ZrW catalysts in the hydroisomerization of n-hexane is promoted both with the addition of Al to the ZrW mixed oxide and the addition of Pt to Pd/ZrAlW catalysts. The improvement in the activity of Pd/ZrAlW catalysts is ascribed to a moderated acid strength and acidity, which can be correlated to the coexistence of W⁶⁺ and reduced-state WO_x species (either W⁴⁺ or W⁰). The addition of Pt to the Pd/ZrAlW catalyst does not modify significantly its acidic character. Selectivity results showed that the catalyst produced 2MP, 3MP and the high octane 2,3-dimethylbutane (2,3-DMB) and 2,2-dimethylbutane (2,2-DMB) isomers.     

甲磺酸伊马替尼的合成

以4-甲基-3-硝基苯胺为起始原料,经过缩合、还原、环合等反应制得抗肿瘤药物甲磺酸伊马替尼。并分别讨论了采用无水碳酸钾代替二异丙基乙胺、水合肼和普通催化剂代替铂炭催化剂以及采用异戊醇作为溶剂的优点。最终反应总收率超过50%,用高效液相色谱分析产品纯度在99.5%以上。     

TGA analysis of γ‐irradiated linear low‐density polyethylene

Linear low‐density polyethylene (LLDPE), based on butene‐1 or hexene‐1, was irradiated with γ‐rays under vacuum or in the presence of air. The study focused on the influence of the dose rate and the γ‐dose on the thermal properties of LLDPE. Differential scanning calorimetry, thermogravimetric analysis (TGA), and TGA/FTIR techniques were used to address the thermal behavior as a result of γ‐irradiation. During this irradiation, competition between crosslinking and scission reactions, subsequent to oxidation reactions, occurred in the polymeric material, which strongly depends on the experimental conditions. A decrease of the crystallinity for γ‐irradiated samples was observed in particular for samples irradiated under vacuum. This observation may be explained by increased hindrance of segment mobility due to crosslinking reactions that prevent crystal growth. TGA investigations revealed an enhancement of the thermal stability for samples irradiated under vacuum but not for those irradiated in air. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2790–2795, 2006