Km高温抗蚀耐磨涂料在省煤器中的应用

锅炉省煤器磨损一直是困绕锅炉稳定运行的主要因素之一。本介绍了Km高温抗蚀耐磨涂料的性能、特点，以及在实际生产中的使用情况，通过实践充分肯定了Km高温抗蚀耐磨涂料的可行性、可靠性和经济性。     

催化裂化大油气管线阻焦剂的研究与开发

介绍了阻焦剂的阻聚分散机理，测定了不同组分的阻焦剂对不同性质原料的阻焦效果，并考察了不同加入浓度对阻焦率以及催化裂化产品分布的影响。试验结果表明：加入50—100μg/g的阻焦剂，可使催化裂化大油气管线阻焦率达到53．7％—63．8％，同时对产品分布及产品性质无不良影响，具有技术经济可行性。     

采煤机液压系统油液污染监测与控制方法研究

分析引起采煤机液压系统油液污染的主要根源，在油液污染动态平衡分析的基础上，提出了实现采煤机液压系统油液污染监测和污染控制基本方法。     

Recent investigations on some cubic Laves phase compounds of rare earth and transition metals

Pseudobinary alloy, Tb_0·27Dy_0·73Fe_2−δ , belonging to C-15 cubic Laves phase having MgCu₂-type structure, possesses large magnetostriction and high magnetomechanical coupling coefficient. The advantages of this material over existing piezoelectric materials, particularly for SONAR applications, are highlighted. Recent results on the influence of cobalt (Co) on magnetic and magnetomechanical properties of Tb_0·27Dy_0·73Fe₂ are discussed.     

自聚焦透镜用于端泵浦DPL的耦合光学系统

本文用自聚焦透镜耦合ＬＤ输出，解决了需要短焦距、大数值孔径透镜的设计和制方面的困难。提出了计算自聚焦透镜耦合效率的简化模型。用自聚焦透镜和一对正交柱面透镜设计了一个耦合系统，并用该耦合系统端泵浦Ｎｄ：ＹＡＧ棒做了实验。     

Σ-Δ过抽样转换器使用中的注意事项

为了充分发挥Σ Δ过抽样转换器的能力以获得最佳的系统性能 ,文章在分析直流电压、时钟抖动及电源的杂波等诸多因素对其影响的基础上 ,提出了适于Σ Δ过抽样转换器工作的最佳条件 ,对Σ Δ过抽样转换器系统的设计制作与调试有一定的指导意义     

甲烷和乙烷共同转化制乙烯的研究

甲烷和乙烷可以同时在Ｗ－Ｍｎ／ＳｉＯ２催化剂上得到活化生成乙烯。原料乙烷和甲烷体积比在０．１１～０．２５的范围内，当甲烷转化率为２０％左右时，共进料反应产物中乙烯体积浓度为８％～１２％，达到炼油厂催化裂化干气中乙烯的浓度。     

1.30μmDFB激光器组件的设计和制做及其工作原理

本文自行设计和制作了１．３０μｍＤＦＢ激光器组件的讨论了光隔离和光耦合原理。由于采用的激光器－光隔离器－光纤的一体化结构，大大增加了该组件的可用性。在实验中得到高达５５％的耦合效率。     

A FETI-like domain decomposition method for coupling finite elements and boundary elements in large-size problems of acoustic scattering

Numerical simulations of acoustic scattering in the frequency domain based on hybrid methods coupling finite elements and boundary elements are the most suited for dealing with problems involving wave propagation in inhomogeneous media. Furthermore, it is necessary to resort to high performance computing to effectively solve the large size problems. However, the direct coupling yields a linear system with a matrix which is partly dense and partly sparse and thus not adapted to high performance computing. To avoid this difficulty, we present a new iterative method constructed from a non overlapping domain decomposition technique.     

Miniaturization and bandwidth enhancement of a cavity backed circular microstrip patch antenna

The resonant frequency of a circular patch antenna with and without circular cavity is measured. The patch miniaturization in the presence of the cavity is proved. Different methods of reducing resonant frequencies and broadening bandwidth without significantly reducing antenna gain are presented. Capacitively loaded patch and slits on the patch stimulate the patch at lower frequencies and multiple resonances, thus help miniaturization. Finally ferrite loading on the feed probe further increases the bandwidth without significantly reducing the antenna gain. The method is much more improved than that for a resistive loaded patch and a deformed patch. © 2007 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2007.