核壳乳剂的潜影分布和Sabatier效应的研究

本文制备了两种单分散八面体模型孔剂,一种是含碘10mol％的碘均匀分布碘溴化银乳剂,另一种是内核含碘20mol％的碘溴化银,外壳为溴化银的核壳乳剂。并对它们分别进行表面硫加金和硫加金加铱敏化。用简单腐蚀技术研究上述乳剂的内部影像空间分布的结果表明:随着表面敏化程度的增加,表面敏度逐渐增大;随着腐蚀的深入,内部敏度逐渐减少。核壳乳剂的表面和内部敏度均大于碘均匀分布颗粒乳剂。核壳乳剂的内部影像在颗粒內部先逐渐减少,在一定深度以后又逐渐上升,内部影像分布出现“低谷”,且“低谷”程度与表面敏化程度有关。Sabatier效应研究的结果表明:产生较明显的Sabatier效应的乳剂颗粒既要有足够的表面敏度,也要有足够的内部敏度,且两者要匹配。同时提出了产生Sabatier效应的机理。     

多孔β-TCP陶瓷药物载体结构与性能的影响因素

本分析了影响多孔β-TCP陶瓷药物载体结构与性能的因素，确定了制备多孔β-TCP陶瓷药物载体的技术路线和工艺参数。     

CPE包覆纳米CaCO3对PVC／纳米CaCO3复合材料结构与性能的影响

研究了基体韧性、纳米CaCO3直接填充与用CPE包覆后填充PVC对复合材料力学性能的影响，并对其微观结构进行了探讨。结果表明，适当的基体韧性有助于获得较高的冲击强度；两种填充方法下，PVC复合材料的冲击强度和拉伸强度呈现出不同的变化趋势。包覆处理填充体系的冲击强度均要比未包覆处理填充体系的略低，而拉伸强度则相反，特别是在包覆小份量CaCO3(2份)时，所得复合材料的冲击强度甚至比PVC／CPE(8份)基体的低12％，而拉伸强度则出现最大值，比基体的高8．9％左右。     

Matrix‐assisted laser desorption/ionization mass spectrometry of synthetic polymers. VI. Analysis of phenol–urea–formaldehyde cocondensates

Phenolic resoles can be regarded as copolymers of phenol and formaldehyde that are distributed in the chain length and the number of methylol groups per molecule. While other spectroscopic methods like FTIR and NMR only give average structures, MALDI–TOF mass spectrometry is able to resolve the oligomer distribution of phenolic resoles. Using 2,5‐dihydroxybenzoic acid or 2,4,6‐trihydroxyacetophenone as matrices, MALDI–TOF spectra are obtained where each oligomer peak can be assigned to a particular chemical structure. Thus, the degree of polymerization and the number of reactive methylol groups can be determined. For urea‐modified resoles, in addition to phenol–formaldehyde and urea–formaldehyde structures, for the first time, phenol–urea–formaldehyde cocondensate structures can be identified directly. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2540–2548, 2003     

双环戊二烯马来酸酯的合成工艺及应用

双环戊二烯、顺丁烯二酸酐及水在135~140℃经水解、加成反应即生成双环戊二烯顺丁烯二酸单酯(DHCM),该产品可用于不饱和聚酯及醇酸树脂的改性,使之具有气干性。另外,还可改进其耐热、耐化学腐蚀等性能。     

一种小型动/静态双坐标感知系统结构设计

针对提高被动式热释电红外(PIR)传感器的探测距离和范围,提出动/静态双坐标感知系统理论,根据动/静态双坐标感知系统对动态目标实现一定距离内和全范围探测的要求,光学基准传递的要求,提出了小型动/静态双坐标感知系统的结构设计方案。该系统配用红外透镜作为其光学装置,在匀速转台的带动下,实现360°全范围探测红外信号,解决了PIR传感器探测距离和探测视场的矛盾,拓宽了PIR传感器的使用领域。经过实验验证,该系统结构设计合理。     

Diamond growth by carbon ion implantation of diamond

Medium energy (5–25 keV) ¹³C⁺ ion implantation into diamond (100) to a fluence ranging from 10¹⁶ cm⁻² to 10¹⁸ cm⁻² was performed for the study of diamond growth via the approach of ion beam implantation. The samples were characterized with Rutherford backscattering/channelling spectroscopy, Raman spectroscopy, X-ray photoemission spectroscopy and Auger electron spectroscopy. Extended defects are formed in the cascade collision volume during bombardment at high temperatures. Carbon incorporation indeed induces a volume growth but the diamond (100) samples receiving a fluence of 4 × 10¹⁷ to 2 × 10¹⁸ at. cm⁻² (with a dose rate of 5 × 10¹⁵ at. cm⁻² s⁻¹ at 5 to 25 keV and 800 °C) showed no He-ion channelling. Common to these samples is that the top surface layer of a few nanometers has a substantial amount of graphite which can be removed by chemical etching. The rest of the grown layer is polycrystalline diamond with a very high density of extended defects.     

Miscibility and fracture toughness of thermoplastic polyurethane/poly(vinyl chloride)/nitrile rubber ternary blends with special reference to the blend composition

Ternary blends of thermoplastic polyurethane and a poly(vinyl chloride)/nitrile rubber blend were investigated in this work. The blends, with weight ratios of 100/0, 80/20, 40/60, 60/40, 80/20, and 0/100, were prepared via melt blending. Dynamic mechanical analysis showed that the blends with ratios of 20/80 and 80/20 were miscible, whereas the 40/60 and 60/40 blends were partially miscible. IR spectroscopy studies showed shifts in the peaks due to specific interactions in the blends. The blends showed degradation behavior between the blend components. The fracture toughness was investigated with the J‐integral by the locus method; the components and the miscible blends had good fracture toughness, whereas the other blends had lower toughness. Similar behavior was observed for the tensile properties. Scanning electron microscopy studies showed the morphological variations in the blends. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1763–1770, 2005     

Pro／ENGINEER高级阵列的探讨

在大多数CAD软件中都有阵列这个命令，一般软件的阵列操作非常简单。作为功能强大的三维造型软件，Pro／ENGINEER的阵列功能也非常强大，但是大多数人只知道Pro／ENGINEER阵列的一些初级应用，碰到复杂点的阵列就转而想别的办法实现。本文主要对Pro／ENGINEER的高级阵列功能进行深入探讨，通过一系列实例来体现Pro／ENGINEER与其它CAD软件在阵列方面的巨大优势。     

四电极电化学MEMS加速度传感器仿真

基于溶液相对于电极的运动会使电极附近因电势差作用而产生的离子浓度梯度发生改变,从而使电极电流发生变化等电化学原理,建立一种置于碘(I2)和碘化钾(KI)混合水溶液环境中的阳极—阴极—阴极—阳极(ACCA)四电极阵列传感单元模型。通过理论分析,该传感单元可以局部电解液为惯性质量,利用电解液中带电离子相对于电极的运动来产生并输出附加电流;进一步的建模仿真证明:在一定的加速度范围内(0a x0.149 m/s2),附加电流的大小同加速度呈正比关系,故可以将此电流放大输出,从而实现对加速度大小的表征。可利用MEMS工艺制作,并封装此传感单元成为加速度传感器。