关于基体曲率的热障涂层残余应力分析

采用空心和实心四相同心圆模型,导出了轴对称温度应力状态下的位移公式,分析了基体曲率对热障涂层残余应力的影响。结果表明:热障涂层结构中各层内既有环向应力,又有径向应力,应力大小与温降成线性关系;当陶瓷层在外层时,在氧化层/陶瓷层和粘结层/氧化层界面上产生垂直界面的拉应力,且实心模型的拉应力远大于空心模型的拉应力;当陶瓷层在里层时,空心模型中相应界面上的应力为压应力。     

原煤脱硫模型仿真与实验研究

搭建了介质阻挡放电脱硫模型,在此基础上,通过仿真分析了影响脱硫放电效果的介质种类、介质厚度、气隙间距、电源电压、电源频率等因素,确定了各因素的最佳配合方案。对介质阻挡放电原煤脱硫实验数据进行了处理分析,发现实验结果与仿真结果基本一致。通过对比分析放电电流频谱图和Lissajous波形,做出进一步推论:加煤能提高放电功率,介质阻挡放电对原煤的脱硫效果体现在低次谐波上。     

Ventilation of a dead-end duct having a porous barrier

Analytic expressions for the flow and pressure in a dead-end duct which has loss of fluid through a porous wall are developed. The presence of an obstruction or auxiliary fan at the end of the duct is included. In either case there is a maximum permissible length of duct. As the duct length approaches this maximum, the main supply fan power and flow increase dramatically. There is no recirculation within the duct when there is an obstruction at the end of the duct. If an auxiliary fan is used, there is always recirculation. However the use of an auxiliary fan can yield major savings in total power requirements.     

等离子体在NO_x治理中的应用

近年来低温等离子技术因其工艺简单、效果好且适用于多种污染物而成为广大学者的研究热点.概述了等离子体脱硝原理,以及脉冲电晕放电法、介质阻挡放电法和电子束法3种目前比较常用的等离子脱除NOx技术,分析了3种技术的原理和优缺点,总结了3种技术近年来的国内外发展状况以及在电厂中的实际应用情况,并提出了这3种技术未来的发展方向.     

Influence of a high‐head dam as a dispersal barrier to fish community structure of the Upper Mississippi River

In river systems, high‐head dams may increase the distance‐decay of fish community similarity by creating nearly impermeable dispersal barriers to certain species from upstream reaches. Substantial evidence suggests that migratory species are impacted by dams, and most previous studies in stream/river networks have focused on small streams and headwaters. Here, we assess whether a high‐head dam (Lock and Dam 19; LD 19) on a large river, the Upper Mississippi River (UMR), substantially alters fish community structure relative to variability expected to occur independent of the dam's effect as a fish dispersal barrier. Using fish catch per unit effort data, we modelled the distance‐decay function for the UMR fish community and then estimated the similarity that would be expected to occur across LD19 and compared it with measured similarity. Measured similarity in the fish community above and below LD19 was close to the expected value based on the distance‐decay function, suggesting LD19 does not create an abrupt transition in the fish community. Although some migratory fish species no longer occur above LD19 (e.g., skipjack herring, Alosa chrysochloris), these species do not occur in high abundance below the dam and so do not drive variation in fish community structure. Instead, much of the variation in species structure is driven by the loss/gain of species across the latitudinal gradient. Lock and Dam 19 does not appear to be a clear transition point in the river's fish community, although it may function as a meaningful barrier for particular species (e.g., invasive species) and warrant future attention from a management perspective.     

介质阻挡放电反应器降解邻二甲苯的特性研究

采用介质阻挡放电(DBD)降解常压下流动态的邻二甲苯模拟废气,系统地考察了放电极值电压,气体的初始质量浓度、停留时间以及相对湿度等工艺参数对邻二甲苯降解的影响,并初步探讨了邻二甲苯的降解产物.实验研究结果表明:在7.0kV的放电极间电压下,邻二甲苯的初始质量浓度为1 500mg/m3,停留时间为9s,其去除率可达到80%以上.降解产物主要为CO2、H2O以及苯甲酸、苯乙酸、苯乙醛等有机物,并且经降解后产物的生物可生化性得到提高,因而为后续的等离子-生物法联合处理VOCs提供了依据.     

Sand corrosion,thermal expansion,and ablation of medium- and high-entropy compositionally complex fluorite oxides

Sand corrosion, thermal expansion, and ablation properties of a new class of medium- and high-entropy compositionally complex fluorite oxides (CCFOs) are examined as potential protective coating materials. Five binary oxides were mixed and sintered into dense, single-phase CCFOs of the general formula: [Hf_(1-2x)/3Zr_(1-2x)/3Ce_(1-2x)/3Y_xYb_x]O_2-δ (x = 0.2, 0.074, and 0.029). These CCFOs exhibit decreased molten sand infiltration and interaction at intermediate temperatures (1200-1300°C) in comparison with a cubic yttria-stabilized zirconia (YSZ) reference; however, at higher temperatures, the trend is reversed due to the increased chemical reactivity. The equimolar high-entropy (Hf_0.2Zr_0.2Ce_0.2Y_0.2Yb_0.2)O_2-δ exhibits no grain boundary penetration by molten sand at all examined temperatures (1200°C-1500°C), although reaction and precipitation are significant. Moreover, these CCFOs exhibit higher intrinsic thermal expansion coefficients (CTE) than the YSZ reference, thereby being more compatible with Ni-based superalloys. The 8YSZ-like (Hf_0.284Zr_0.284Ce_0.284Y_0.074Yb_0.074)O_2-δ exhibits the highest CTE in this series of CCFOs due to oxygen clustering effects. Finally, these CCFOs also exhibit lower emissivities and form unique faceted microstructures in ablative environments.     

Nondestructive measurements of residual stress in air plasma-sprayed thermal barrier coatings

Premature spallation of thermal barrier coatings (TBCs) is a critical issue during the service of gas turbines, and nondestructive evaluation is crucial to address this problem. Herein, a novel approach that indicates delamination by measuring the residual stress evolution of thermally grown oxide (TGO) for air plasma spraying (APS) TBCs is proposed and verified via the combination of photoluminescence piezo-spectroscopy (PLPS) and X-ray computed tomography. A mineral-oil-impregnating approach and a cold-mount low-shrinkage epoxy-mounting approach are used to alleviate the signal attenuation by pores and microcracks in APS TBCs, improving the detectable PLPS signal and X-ray transmission for stress measurement and delamination characterization, respectively. We have nondestructively measured the TGO residual stress mapping in APS TBCs and its evolution with oxidation. Furthermore, the evolution of TGO morphology and critical microcracks are obtained by X-ray computed tomography. The synchronous evolution of TGO residual stress, TGO thickness, and critical microcracks as a function of oxidation time is obtained and correlated. The transition point, as experimentally identified, at which the TGO stress starts to drop, agrees well with the critical moment of microcrack coalescence. This directly verifies that the TBC delamination can be effectively indicated by residual stress evolution of TGO in APS TBCs.     

Tailorable thermal expansion in leucite-pollucite materials derived from geopolymers for environmental barrier coatings

The K[AlSi₂O₆]-Cs[AlSi₂O₆] pseudo-binary system was synthesized by geopolymer crystallization. The thermal expansion properties of these materials were studied by in situ high-temperature X-ray diffraction to characterize thermal expansion behavior for potential application as environmental barrier coatings. Tailorable thermal expansion through changing cation stoichiometry allowed reduced thermal expansion mismatch with SiC_f/SiC composites compared to rare-earth-based coatings.