Highly Uniform and Stable Transparent Electromagnetic Interference Shielding Film Based on Silver Nanowire–PEDOT:PSS Composite for High Power Microwave Shielding

Electromagnetic interference (EMI) shielding materials, especially ones with excellent shielding effectiveness (SE), high optical transmittance, long-term stability as well as high uniformity, are urgently desired to meet the requirements of many applications. Herein, an extremely transparent, stable and uniform silver nanowire (Ag NW)–poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) composite film as an EMI shielding material is prepared, which possess excellent shielding capability to both small signal and high power microwaves (HPM). The composite film exhibits SE of 30.5 dB in the frequency range of 1–12 GHz (small signal) and simultaneously has an optical transmittance of 91.0%. The SE continuously increases to 41.4 dB, while the optical transmittance still maintains at 81.1%. The composite film is very uniform, and its SE is almost unchanged even when exposed in air for a year. The SE of this composite film under the excitation of HPM is also thoroughly investigated. The HPM SE is much larger than that of small signal. As the power density of HPM is increased, the SE firstly remains unchanged, then continuously increases, and finally saturates. The SE exceeds 50 dB with the excitation power density of 40 W. More interestingly, the SE is saturated at a fixed HPM power density.     

基于电磁耦合注入的电力电缆局部缺陷在线定位方法

为了解决现有频域反射方法仅能在离线情况下对电缆缺陷进行定位检测的不足,提出了一种基于频域反射法和电磁耦合技术的电缆缺陷在线定位方法。首先,依据电缆分布参数模型对含有局部缺陷的电缆进行仿真建模,分析了不同电容变化程度的缺陷点与不同测试频率对电缆缺陷定位效果的影响。然后,探究了传感器结构对信号注入效率的影响。最后,分别在实验室105 m和500 m电力电缆上进行验证,在离线测试情况下,通过改变105 m电缆末端负载阻值,模拟不同电缆负载下的线路情况,并分析其对局部缺陷处和电缆末端处反射强度的影响。在带电测试情况下,通过串联谐振平台对500 m电缆进行通电,利用所提在线定位方法对该电缆进行测试,以检验所提方法的有效性。仿真及实验结果表明：相较于电缆离线定位测试方法,该方法能够在电缆通电的状态下,实现对电缆缺陷点的在线定位,且具有较高定位精度和识别灵敏度。     

水下隧道穿越管道保护效果测试评价

本文通过对四川气田北干线涪江隧道穿越管道阴极保护电参数的现场测试，取得了实际可信的基础数据，验证了处于水下隧道洞内的穿越段管道，能得到陆上强制电流阴极保护系统的有效保护，保护电流所必经的岩石层和锚喷钢筋混凝土层对保护电流没有构成屏蔽的结论，对管道工程设计和运行管理具有指导作用。     

火焰原子吸收光谱法测定电缆绝缘护套中的铅

提出了用空气—乙炔原子吸收光谱法测定电缆绝缘护套中的铅含量。铅在0.00~11.00μg.ml-1(r=0.9991)范围内有良好的线性关系。本法的RSD≤3.17%,回收率在97.2%~103.2%之间。     

电磁屏蔽涂料的发展现状及趋势

电子产品的日益普及使得电磁干扰成为一个突出问题,应用电磁屏蔽涂料是消除电磁干扰简单而有效的方法,本文介绍了电磁屏蔽涂料的组成、效能评价方法、技术思想、存在的问题以及发展趋势。复合型以及水性屏蔽涂料具有广阔的研发前景,高效能、宽频带、寿命长的电磁屏蔽涂料将会受到市场欢迎。     

分形及分维在单轴向三维编织复合材料拉伸实验中的应用

基于分形几何的计盒维数研究了三维编织复合材料拉伸实验的断裂样照,结果表明,该材料的断裂曲线具有统计自相似性,在不同的尺度范围内具有不同的空间分布格局;而计盒维数定量地表征了其尺度变化规律;准静态和低应变率加载条件下材料的分维数较大,表明其空间占据程度较大,曲线弯曲结构复杂,这是因为低应变率加载时材料内部结构断裂时间不同造成;而高应变率加载时,断裂曲线分维数较小,曲线空间占据小,弯曲结构比较简单,这是由高应变率加载时材料内部结构断裂时间差异缩小造成。     

动力有限元在三维编织复合材料弹道冲击性能研究中的应用

三维编织复合材料具有高的层间剪切强度,高的损伤容限和显著的抵抗裂纹扩展的能力。三维编织复合材料弹道性能的研究一般局限于实验观察阶段。本文运用数值计算方法对三维编织复合材料细观结构有限元模型进行弹道冲击性能研究,得出了合理的结果,说明了这种方法的有效性。     

Conductive Papers Containing Metallized Polyester Fibers for Electromagnetic Interference Shielding

Conductive papers were developed for preventing or reducing electromagnetic interference (EMI), and their shielding efficiency was evaluated. This type of conductive paper consists of wood pulp, synthetic pulp and metallized polyester fibers (0.5–2.0 mm long and 14 m in diameter) whose surfaces are coated with nickel alone (Ni-PET) or copper and nickel double layers (Ni-Cu-PET) by electroless plating. In this report, the effect of the characteristics of these metallized fibers, such as their conductivity, geometry and the concentration of fibers in paper, which lead to high efficiency for shielding effectiveness is discussed. For instance, one of the conductive papers (80 g/m2) which was prepared by mixing 40% Ni-Cu-PET and 60% synthetic polyethylene pulp showed over 40 dB shielding effectiveness between 10 MHz and 1 GHz.     

金属－PTC陶瓷复合材料研究

研究低Ｔ＿ｃＰＴＣＲ复合材料的制备工艺，测试所制成样品的阻温特性。通过样品Ｘ射线定性相分析，探讨该复合材料所表现的ＮＴＣ阻温特性机理。     

Sustainable conducting polymer composites: study of mechanical and tribological properties of natural fiber reinforced PVA composites with carbon nanofillers

ABSTRACT

Ball milled jute fiber (JF) was added to Polyvinyl Alcohol (PVA)/20 wt.% multi-layer graphene (MLG) composites in various proportions (0, 5, 10, 15 and 20 wt.%) to prepare sustainable and biodegradable conducting polymer composites. Also, PVA/17.5wt.%MLG/2.5wt.%MWCNT/20wt.% JF composite was prepared for comparison purpose. A dynamic mechanical analysis of the composites was conducted to analyze their viscoelastic nature. The electrical conductivity of the composites was measured to study their suitability for various applications. Jute reinforcement increased the electrical conductivity of PVA/MLG nanocomposites. The PVA/20wt.%JF/17.5wt.%MLG/2.5wt.%MWCNT hybrid composite had the highest electrical conductivity of 3.64 × 10^?4 S/cm among all the composites prepared. Multilayered structures of the hybrid composite films were made by hot-pressing, and their effectiveness in electromagnetic interference shielding was tested. The shielding effectiveness of the composites decreased with jute addition. The wear resistance of PVA/MLG/JF composites increased with an increase in the jute content up to an optimum value of 10 wt.%, and then it started deteriorating.