分析恒载效应的有限元方法

本文在Takabatake关于恒载对梁静、动力影响的研究工作的基础上,导出了梁考虑恒载效应的动力分析有限元公式,提出了荷载影响刚度矩阵的概念。分析了分布和集中两种恒载型式对简支梁和悬臂梁自振特性的影响。计算结果表明,用本文方法与Takabatake应用Galerkin方法和近似闭合解方法的结果吻合良好。同时由于本文采用了矩阵形式,不仅便于编制计算机程序,且使方法有更广泛的适用性和灵活性,可更方便地用于各种不同的构造和边界条件下的实际结构。     

含钇奥氏体基堆焊焊条堆焊层研究

针对高温、磨损、热疲劳工况下服役零件的失效，研制了一种含稀土元素钇的奥氏体基沉淀强化型堆焊焊条，并对堆焊层组织与性能进行了较系统的研究。     

用层次分析法(AHP)确定煤和瓦斯突出中的有关参数

介绍了井下瓦斯突出的原因 ,详细阐述了瓦斯突出的有关参数的确定方法。     

Thermochemical behaviour of Ru(II) complex-SiO2 microcomposites

The results from DSC and thermogravimetric analysis of gels produced from a mixture of tetraethoxysilane (TEOS) and octyltriethoxysilane (OtEOS) both with and without immobilized Ru(II) tris(4,7-diphenyl-1,10-phenanthroline) dichloride as well as DSC and TG data for films deposited by deep-or spin-coating from the same gels, are reported. The initial products are characterized by elemental analysis, IR, solid state NMR and mass spectroscopy. Elemental analysis and IR spectroscopy are applied for identification of some of the intermediates obtained after heating at different temperatures. The final products are characterized by X-ray diffractometry. A hypothesis for the thermodecomposition processes taking place is proposed. The results reported contribute to elucidation of the properties as well as the temperature intervals in which the studied microcomposites could be used as sensing components of oxygen sensors.     

疏松砂岩地层出砂对套管损坏的研究

以东濮凹陷文明寨油田历年井况调查的套管损坏资料为依据，在对出砂油井套管损坏形态、层位与射孔状况、岩石性质等因素进行综合分析基础上，对疏松砂岩出砂、上覆岩层坍塌等主要方面导致的套管受力变形进行研究，为探讨防治措施提供依据。     

砂岩油藏注水井深部酸化技术

吐哈油田长期注水开发后,注入水外源性伤害和地层内源性伤害不断在地层深部累积,采用常规酸化措施效果不理想。为此,通过长岩心污染模拟实验,研究了深部污染的污染特征及酸化解堵机理,通过解堵液缓速和工艺过程的综合应用实现深部解堵。应用AcidGuide专家系统对单井进行全面的污染诊断分析,并进行了参数优化设计,形成了适应吐哈油田深部酸化解堵的技术体系,现场应用取得良好效果,为类似低渗透油藏水井增注措施提供参考。     

Bioeompatibility of Compounds of Extracellular Matrix and Thermally Reversible Hydrogel

A new scaffold material composed of extracellular matrix （ECM） and thermal sensitive hydrogel （HG）, and evaluated its biocompatibility were investigated. We cultured bladder smooth muscle cells with this compound material, and then observed with phase contrast microscopy and scanning electron microscope （SEM） to assess the cell growth and morphology. The cell adhesion and proliferation were detected with MTT assay and cell count. Results show the ECM/HG compounds appeared as a net-like and red-stained construction with enough meshes and without any cellular fragments. 6 h after implantation, cells were observed adhere on the compounds and extend spurious along the fibers 12 h later. Under SEM even some ECM was observed to be secreted. MTT assay shows there was obvious statistic difference among 3 groups （P〈0.05）. ECM/HG compound materials show a good biocompatibility, which confirms that it would be an ideal tissue engineering scaffolds.     

一个基于相关存储的模式识别方法

应用相关的存储技术实现模式识别可缩减存储大小,但由此带来的饱和问题严重影响系统正常工作,为解决此问题,本文在分析现有系统的基础上给出了基于一系列逻辑操作的识别技术.该技术的实质是用一形式化的方法增加输入模式间的线性无关性.通过论证与实例验证,该方法是有效而实用的.     

二极管泵浦内腔倍频激光技术研究进展

评述了二极管泵浦内腔倍频激光技术的发展现状，对解决中小功率下‘绿光问题’的理论及实验方案进行了比较分析，对高功率内腔倍频系统亦进行了初步探讨。