Relaxation phenomena caused by equilibration of point defects

Relaxation phenomena due to equilibration of point defects in metals are reviewed. The relaxation effect in specific heat observed in tungsten and platinum confirms that in both cases the nonlinear increase in the high-temperature specific heat has to be attributed to point-defect formation. Relaxation phenomena observed by measurements of electrical resistivity and positron annihilation are also considered. The comparison of the data seems to be favorable for the conclusion that all the phenomena are of one origin.     

Carbon fibre cloth as an electrode material: electrical conductivity and mass transfer

The paper deals with carbon fibre cloth electrodes, employed in the fabrication of composite materials. The electrical conductivity of single bundles, groups of bundles and cloth is studied. Ohm's law applies to the electrical conduction in the direction of the fibre length, but bundle conductivity decreases with the number of fibres in the bundle. Electrochemical mass transfer between a flowing electrolyte and a cloth arranged as a flow-through or a flow-by porous electrode indicates the existence of double porosity in the material. Due to double porosity, only the external surface of the cloth works as an electrode. This finding shows that the material is not suitable for such an application.     

可燃性粉尘环境用电气设备标准介绍

章着重对可燃性粉尘环境用电气设备新标准（GB12476．1－2000和GB12476．2－2XXX）的主要内容进行了介绍，并对粉尘的爆炸机理，国内外粉尘标准体系等进行了阐述。     

新型环氧树脂绝缘浸渍胶（WSK）在微特电机上的应用

介绍了新型环氧树脂少溶剂快干绝缘浸渍胶的性能试验数据及基在微特电机上的应用及注意事项。     

Al(OH)3对硅橡胶性能的影响

综述了Al（OH)3粒径和用量对硅椽胶漏电电流、脉冲电流、耐漏电起痕、表面粗糙程度、电蚀损、介电性能、拉伸强度及漏电电流实验重复性的影响。     

基于AutoCAD的电气符号图像控制菜单的开发

以电气符号为例，介绍了AutoCAD平台下图像控制菜单的开发过程以及幻灯片、幻灯片库的创建方法。     

波分复用系统中的交错复用器(Interleaver)技术

鉴于波分复用技术已成为光纤通信的发展方向，介绍几种新型的交错复用器的原理、结构等情况，对各种器件进行了比较。     

检修链在煤矿生产中的作用

机电事故严重影响企业的安全运行。国投新集二矿通过完善机电设备检修链的各个环节,最终实现了降低机电事故率的目标。     

光纤光栅的长度对其峰值反射率的影响

利用耦合模理论,数值分析了当光纤光栅(FBG)折射率变化为均匀分布、直流切趾高斯分布时,光纤光栅长度对其峰值反射率的影响。研究结果对光纤光栅外腔半导体激光器的设计和性能优化具有重要的意义。     

多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。