Modélisation d'un four de calcination du coke de pétrole: II. Simulation du procédé

A one-dimensional steady-state mathematical model has been developed to simulate the process of calcination of petroleum coke in a rotary kiln. A simulation is made to reproduce the operating conditions prevailing during a normal working day, in order to validate the model, and to study the effects of the main process control variables. It has been found that of the energy provided by combustion, 59.5 % comes from hydrogen, 14.6 % from the carbon of the coke bed, 13.8 % from coke dust, 11.3 % from methane and 0.8 % from tar. A comparison with existing models is made to identify eventual similarities between the various kilns under study. It appears that maximum coke temperature occurs at 45 to 55 % of kiln length, while volatile matters evolution takes place between 5 and 60 % of kiln length, measured from feed end.     

轴向冲击下波纹腹板梁的失稳控制和能量吸收

针对Sine波纹腹板梁结构,通过设计其初始振幅缺陷,控制不同波形阶数下波纹梁的失稳模态,引导上下翼板按预期渐进、稳定、可重复的压溃变形模式发展.采用Abaqus/Explicit中的显式动力学方法数值模拟初始振幅缺陷与比吸能(Specific Energy Absorption,SEA)的关系.通过对比低阶、中阶和高阶波形的载荷-位移曲线说明波形阶数对吸能特性和失稳控制的影响.结果表明:对于给定的波形阶数,存在初始振幅缺陷的临界值使Sine波纹腹板梁结构达到预期的临界失稳状态,同时SEA最大;初始振幅缺陷越大,失稳控制越容易,但吸能效果随之降低.     

基于次最优模型降阶的自整定PID控制器

针对过程工业中含有振荡环节和大滞后环节较难控制的被控对象,设计了一种基于频域辨识的自整定PID控制器.该控制器采用次最优模型降阶算法,辨识出二阶加纯滞后的模型;然后基于给定的相位裕度和幅值裕度,整定出PID参数.并通过仿真实验表明对于不同的被控对象,自整定得到的PID参数均能取得较好的控制效果.     

State space approximation for general fractional order dynamic systems

Approximations for general fractional order dynamic systems are of much theoretical and practical interest. In this paper, a new approximate method for fractional order integrator is proposed. The poles of the approximate model are unrelated to the order of integrator. This feature shows benefits on extending the algorithm to the systems containing various fractional orders. Then a unified approximate method is derived for general fractional order linear or nonlinear dynamic systems via combining the proposed new method with the distributed frequency model approach. Numerical examples are given to show the wide applicability of our method and to illustrate the acceptable accuracy for approximations as well.     

Constructing and applying higher order textons: Estimating breast cancer risk

Texture analysis based on textons is extended by introducing a method for computing textons of arbitrary order. First-, second- and third-order textons are applied to classify screening mammograms as to indicate a low or high risk of breast cancer. First-order textons are found to provide better estimates of breast cancer risk than other orders on their own but the combination of first- and second-order textons outperforms first-order textons alone and other combinations of two orders. Combining all three orders of textons does not improve classification. This example indicates that including higher-order textons has the potential to improve classification performance.     

An order-picking operations system for managing the batching activities in a warehouse

Nowadays, customer orders with high product variety in small quantities are often received and requested for timely delivery. However, the order-picking process is a labour-intensive and costly activity to handle those small orders separately. In such cases, small orders are often grouped into batches so that two or more orders can be served at once to increase the picking efficiency and thus reduce the travel distance. In this paper, an order-picking operations system (OPOS) is proposed to assist the formulation of an order-picking plan and batch-handling sequence. The study integrates a mathematical model and fuzzy logic technique to divide the receiving orders into batches and prioritise the batch-handling sequence for picking, respectively. Through the proposed system, the order-picking process can be managed as batches with common picking locations to minimise the travel distance, and the batch-picking sequence can be determined as well. To demonstrate the use of the system, a case study in a third-party logistics warehouse is presented, and the result shows that both the order-picking activity and labour utilisation can be better organised.     

Phase evolution and thermophysical properties of high-entropy RE2(Y0.2Yb0.2Nb0.2Ta0.2Ce0.2)2O7 oxides

Pursuing novel thermal barrier–coating materials with lower thermal conductivity and high-temperature stability can simultaneously improve the working efficiency and service temperature of a gas turbine. In this study, a series of high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ (RE = La, Nd, Sm, Gd, Dy, and Er) oxides were prepared though solid-state reaction. Through tuning the rare-earth cations, an order–disorder transition occurs from certain partially ordered weberite structure (C222₁) to disordered defective fluorite structure (Fm$\overline{3}$m). All the high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ oxides possess low thermal conductivity in the range of 0.91–1.34 W m⁻¹ K⁻¹ at room temperature, which can be attributed to increased lattice anharmonicity and disorder, resulting in additional phonon scattering. Herein, we proved that the incorporation of heterovalent cations at B-sites in high-entropy A₂B₂O₇ crystals is an effective strategy to reduce the thermal conductivity without compromising the decrease of oxygen vacancy. Moreover, the high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ oxides show the relatively higher thermal expansion coefficients of 10.3–10.7 × 10⁻⁶°C⁻¹ and excellent phase stability at elevated temperatures.     

Reduced order modeling & controller design for mass transfer in a grain storage system

This paper considers the problem of simulating the humidity distributions of a grain storage system. The distributions are described by partial differential equations (PDE). It is quite difficult to obtain the humidity profiles from the PDE model. Hence, a discretization method is applied to obtain an equivalent ordinary differential equation model. However, after applying the discretization technique, the cost of solving the system increases as the size increases to a few thousands. It may be noted that after discretization, the degree of freedom of the system remain the same while the order increases. The large dynamic model is reduced using a proper orthogonal decomposition based technique and an equivalent model but of much reduced size is obtained. A controller based on optimal control theory is designed to obtain an input such that the output humidity reaches a desired profile and also its stability is analyzed. Numerical results are presented to show the validity of the reduced model and possible further extensions are identified.     

基于中文陈述句灵活语序的Lambek演算

目前,自然语言处理已从句法、词法层面走向轻量级语义层面。针对中文陈述句的自然语言处理,传统Lambek演算无法解决中文陈述句灵活语序的问题,而现有的方法加入模态词、新连接词等后,又进一步增加了已经是NP-hard的Lambek演算的复杂性,因此并不适合计算机的相关处理。基于此,采用加标动词匹配的Lambek演算对中文陈述句灵活语序进行处理。加标动词匹配算法的时间复杂度低,使得计算机及其程序能有效地对中文陈述句灵活语序进行处理,并能通过Curry-Howard对应理论与λ-演算引入轻量级语义处理。     

基于LS-SVM逆系统的无轴承异步电机解耦控制

无轴承异步电机具有非线性、多变量和强耦合的特点,要实现电机稳定悬浮和旋转运行,必须对其进行非线性动态解耦控制。为了克服逆系统方法精确建模难的局限性,采用基于最小二乘支持向量机(LS-SVM)α阶逆系统方法对无轴承异步电机进行动态解耦控制的研究。首先利用最小二乘支持向量机辨识出无轴承异步电机的逆模型,然后将它串联在原系统前,将无轴承异步电机解耦成四个独立的伪线性子系统-2个径向位移子系统、一个速度子系统和一个磁链子系统。为保证鲁棒性能,最后对解耦后的系统采用非线性内模控制策略。研究表明,LS-SVMα阶逆系统方法能够实现无轴承异步电机径向悬浮力和旋转力之间的动态解耦控制,控制系统具有良好的静态和动态性能。