MOBILIZATION OF SLUDGE IN HORIZONTAL CYLINDRICAL TANKS WITH SUBMERGED NOZZLES

Over 378,000 m³ (100 million gal) of radioactive waste is being stored in hundreds of tanks at several U.S. Department of Energy (DOE) sites. The environment within the tanks is highly radioactive and chemically harsh. The waste typically consists of a heterogeneous sludge layer covered by a layer of supernatant. A few of the tanks have leaked to the environment, while others are corroding. Removing the waste from the tanks and processing it to a stable final form are desired to prevent any additional contamination of the environment. The tanks vary in size and geometric shape and do not have systems for removing the sludge waste.

Mobilization and mixing studies were conducted with a surrogate sludge (e.g., kaolin clay) using submerged jets in two sizes of horizontal tanks with nominal capacities of 0.87 m³ (230 gal) and 95 m³ (25,000 gal). Mobilization efficiencies and mixing times were determined for single and bidirectional jets in both tanks with the discharge nozzles positioned at various locations in the tanks. Approximately 80% of the surrogate sludge was mobilized in the 95-m³ tank using a fixed bidirectional jet (inside diameter = 0.035 m) and a jet velocity of 6.4m/s (21 ft/s). The effective cleaning length, which is defined as the distance between the jet and the edge of the remaining sludge bank, was approximately 3.2 m (10 ft) on each side of the bidirectional jet.     

水平带式真空过滤机的选择与应用

本文介绍了水平带式真空过滤机的特点和选用，特别讨论了往复盘水平带式真空过滤机的工作原理及主要特点，提出了应用实例及其发展方向。     

Free convection heat transfer over a horizontal plate at low prandtl number

Boundary layer equations for free convection heat transfer along a semi-infinite horizontal plate are derived by giving more importance to the energy equation. The equations are obtained for low Prandtl number and two separate polynomials are used to approximate the temperature and velocity profiles in these regions. The rate of heat transfer is compared with the available analytical and numerical results based on conventional boundary layer equations.     

水平井产出剖面测井技术在塔河油田的应用

由于水平井中流体的流动相态和施工工艺的复杂性,造成常规的产出剖面测井技术难以适应于水平井,因此水平井产出剖面测井技术是一项技术含量高、研究难度大、生产迫切需求的工作。本文简单介绍了水平井产出剖面测井技术及爬行器施工工艺,应用该技术成功完成了塔河油田TK109H等三口水平井产出剖面测井,并总结了施工经验与存在的问题,为进一步应用该技术评价生产层段产出状况提供帮助。     

水平气井优化设计与应用

分析影响水平气井优化设计的地质因素、水平井最优长度、最优位置.结合水平井优化设计的实例分析,提供确定水平井最佳长度和位置的方法.     

Remaining oil distribution in Ng3^3 bottom water reservoir of Lin 2-6 fault-block in Huimin depression and potential tapping in horizontal well

Oil reservoirs with secondary bottom water in Ng33 members (in Guantao formation, Paleogene system) of Lin2-6 fault block in Huimin depression (Bohai Bay Basin) have entered the late stage of ultra-high water-containing-exploitation. Oil exploita-tion from vertical wells is becoming more and more inefficient. The reservoir type, with water displacing oil and the remaining oil distribution are specifically studied in order to improve the efficiency of the recovery ratio. An integrated scheme for adjusting horizontal wells has been designed and the key technique of the scheme optimized. The study shows that: 1) the positive rhythm of fluvial depositional features is the internal cause of the flooding of oil reservoirs while water injection, injection-production patterns and accumulative petroleum production are the external causes; 2) oil-water driving patterns have transferred from edge water ad-vancing to bottom-water-coning; distribution of the remaining oil mainly concentrates in the upper rhythm and top of the middle rhythm in Ng33 members; 3) a great deal of remaining oil is enriched in high positions of faults, in axes of tiny structures, in stagna-tion areas among water-injection wells and oil-wells and in tectonic saddle areas with sparse wells. Compared with vertical wells, horizontal wells have advantages such as high recovery, high off-take potential, high critical output, large controlling areas and long time of bottom-water breakthrough.     

地下连续墙施工变形监测与结果分析

以抚州市电力大厦为例,监测其地下连续墙的水平位移和沉降监测。从水平位移监测值来看,北侧的水平位移较大,D8的位移达到预警值,D5临近预警值,为此,在1层开挖位移增加值较大处（深度为4．2m）加大对部分观测点的观测频数,并加强北面的支护体系,增加角支撑,并在长边增加2根对撑。沉降变化曲线表明：地下连续墙墙顶在整个开挖过程中存在一个波浪式的抬升现象。除第V阶段开挖过程因开挖面积及土方量均较小、反应不明显外,伴随着每次挖土过程地下连续墙墙顶均有一次明显的抬升过程,在楼板的制作和养护期间,墙顶先下沉后逐渐趋于稳定,大底板浇筑后墙顶又逐渐下沉。     

后方交会法在水平位移监测中的应用探讨

根据后方交会公式,导出交会点坐标变化量与交会角或交会边变化量之间的线性关系式,使水平位移量的解算变得直接、简单、快捷,在理论上便于分析.将此法应用于水平位移监测工作基点稳定性的检测工作,能够提高工作效率及监测成果的实时性及有效性.     

外商直接投资类型转变的实证分析

论文在文献评述的基础上利用1992—2008年日本、美国等10个主要经济体对华直接投资数据,实证检验了外商直接投资(FDI)类型与中国市场规模、要素成本、投资环境之间的关系。结果表明:FDI在中国既具有垂直型FDI的特征,同时又具有水平型FDI的特征,但水平型特征更为突出。随着中国经济的迅速发展和市场规模的扩大,进入中国的FDI正由垂直型向水平型转变。在实证分析的基础上,针对当前的FDI类型转变提出了相关政策建议。     

基于增广拉格朗日乘子法的水平井射孔密度分布研究

合理的孔眼密度分布能改善水平井入流剖面,有利于延缓水、气锥进。考虑水平井井筒内摩擦损失和加速损失的影响,基于Landman油藏渗流模型,建立了以孔眼位置为优化设计变量、均匀入流剖面为约束条件、水平井产量或生产压差为目标函数的射孔优化模型。采用增广拉格朗日乘子法对有限导流水平井的射孔密度分布进行优化研究。优化结果表明,为获得尽可能均匀的入流剖面,沿水平井跟端向指端方向射孔密度逐渐增加,约在井筒长度的3/5位置附近取得最大值,在趾端处降低;均匀入流剖面下的产量较均匀射孔水平井的产量低。