湛江1.20 Mt/a加氢裂化装置的设计及运行

对湛江东兴石油企业有限公司1.20 Mt/a加氢裂化装置的工程设计及工业运转进行了总结,简要介绍了工艺及工程技术特点、装置的工业运转结果等,对装置的运转情况进行了分析.分析结果说明,在中等压力下,生产优质柴油和较低BMCI值尾油的工艺技术和工程设计是成功的.     

高分辨率阵列感应测井仪在河南油田的应用

文章介绍了美国Baker-Atlas公司研制生产的高分辨率阵列感应成像测井仪（HDIL）,简述了该仪器的工作原理和技术性能指标及主要应用范围,并介绍了高分辨率阵列感应测井（HDIL）资料在河南南阳油田的具体应用实例.     

多区双重介质复合气藏渗流数学模型及其压力动态

四川盆地大多数气藏属于裂缝孔隙型气藏,气藏非均质性强.经典的径向均质复合试井解释模型与气藏实际情况不相符,解释结果与实际地质情况出现抵触现象.针对这种情况,建立了多区双重孔隙介质复合地层模型,求得了该模型的拉氏空间解,分析了其典型的压力动态特征,并对影响因素可能对曲线产生的影响进行了分析.     

IBM PC集群计算机ATA磁盘系统升级技术方法研究

文章概述了IBMPC集群计算机的系统结构。对该系统在石油地震资料处理应用中存在的ATA磁盘系统故障率高的问题进行了分析，提出了针对刀片式服务器的ATA磁盘系统进行升级的解决方案。对石油地震资料处理高性能运算具有一定的参考价值。     

沥青混合料的使用性能与试验方法分析

沥青混合料的使用性能与试验方法对保证和提高沥青路面的修建质量非常重要。在使用荷载、自然因素对沥青路面作用分析的基础上,对沥青混合料的温度稳定性、耐久性、抗滑性及施工的和易性等方面进行了系统的分析探讨,提出了相关的性能要求与试验评价方法。     

固体酒精的制备工艺与性能研究

以硬脂酸与氢氧化钠反应生成的硬脂酸钠用作制备固体酒精的固化剂，研究了固体酒精的制备工艺与性能的关系，通过正交试验对工艺条件进行了优化。用40mL酒精溶解2．0g硬酯酸，50mL酒精溶解0．4g氢氧化钠，在70℃下反应30min，制备的固体酒精综合性能最好。     

HSG冻胶调剖堵水剂室内评价

针对吉林油田低渗透、裂缝油藏注水开发后期注水窜流严重的特点,研制出新型冻胶调剖堵水剂HSG。对HSG成胶前溶胶体系的表观黏度影响因素进行了分析,分析认为在相同剪切速率下溶胶体系表观黏度随共聚物浓度、矿化度、碱含量的增加而增大,并表现出剪切稀释特性,黏温测试表明溶胶体系表观黏度随温度升高而下降;对HSG成胶后冻胶体系的强度进行了测定,确定其屈服应力值为3500 Pa,振荡剪切应力扫描确定了冻胶体系的线性黏弹性区域,频率扫描确定该冻胶为强冻胶体系;2组并联填砂管选择注入试验表明,HSG溶胶体系具有良好的选择注入能力,能达到优先进入高渗透层的目的;20 m超长填砂管封堵试验表明,HSG溶胶体系的注入压力梯度为0.82 MPa/m,具有易于注入的特点,HSG成胶后的封堵强度为17.54 MPa/m,具有较强的封堵能力。该研究为HSG冻胶调剖堵水剂现场应用提供了借鉴。     

五种恒虚警方法性能分析

比较了五种恒虚警方法在各种杂波背景下的检测性能,得出CMLD-CFAR是工程上可以实现且检测性能比较好的一种恒虚警处理方法.     

Uplink Scheduling in CDMA Packet-Data Systems

Uplink scheduling in wireless systems is gaining importance due to arising uplink intensive data services (ftp, image uploads etc.), which could be hampered by the currently in-built asymmetry in favor of the downlink. In this work, we propose and study algorithms for efficient uplink packet-data scheduling in a CDMA cell. The algorithms attempt to maximize system throughput under transmit power limitations on the mobiles assuming instantaneous knowledge of user queues and channels. However no channel statistics or traffic characterization is necessary. Apart from increasing throughput, the algorithms also improve fairness of service among users, hence reducing chances of buffer overflows for poorly located users. The major observation arising from our analysis is that it is advantageous on the uplink to schedule “strong” users one-at-a-time, and “weak” users in larger groups. This contrasts with the downlink where one-at-a-time transmission for all users has shown to be the preferred mode in much previous work. Based on the optimal schedules, we propose less complex and more practical approximate methods, both of which offer significant performance improvement compared to one-at-a-time transmission, and the widely acclaimed Proportional Fair (PF) algorithm, in simulations. When queue content cannot be fed back, we propose a simple modification of PF, Uplink PF (UPF), that offers similar improvement. Hereafter, we refer to users with low recieved power at the base even when transmitting at peak transmit power as “weak” users, and the strongly recieved users at the base as “strong” users. Krishnan Kumaran is currently a member of the Complex Systems Modeling section in the Corporate Strategic Research of ExxonMobil Corp., Clinton, NJ. Formerly, he was a Member of Technical Staff in the Mathematics of Networks and Systems Research Department at Bell Labs in Murray Hill, NJ, where his research interests were in modeling, analysis and simulation of design, resource management and scheduling issues in telecommunication networks. Lijun Qian is an assistant professor in the Department of Electrical Engineering at Prairie View A&M University. He received his B.S. from Tsinghua University in Beijing, M.S. from Technion-Israel Institute of Technology, and Ph.D. from WINLAB, Rutgers University, all in electrical engineering. Before joining PVAMU, he was a researcher at Networks and Systems Research Department of Bell Labs in Murray Hill, NJ. His major research interests are in wireless communications and networking technologies, especially in radio resource management, protocol design, TCP/RLP optimization and MPLS traffic engineering.     

低温送风系统末端装置诱导器的研究及性能评价

研究了在低温送风系统中诱导器(IDU)的结构特点、工作原理、送风方式,分析了诱导器送风口射流速度的特性,得出了诱导器空调系统的优缺点。