Modelling direct sequence pseudonoise(dspn) satellite reception with directional antennas in the dense scatterer mobile environment

A geometric propagation model is developed for simulating the reception of direct sequence pseudonoise (DSPN) satellite signals by a directional or omni antenna in the dense scatterer mobile environment. The model is first validated for narrowband signals by a direct comparison of both simulated cumulative signal strength statistics and simulated diffuse Doppler spectra with classical theory. The model is then used to predict fading statistics for DSPN signaling, either with omni or directional antennas. As expected, the mitigation of fading is closely related to the ratio of DSPN chip duration to delay spread of the scatterer medium for both the omni and directional antennas.     

Interfacial Dipoles and Radiated Energy

Electric dipoles radiate an electromagnetic field into their surroundings. The electric and magnetic fields from a point source or from linear dipoles have components parallel to a spherical surface but also a radial component. In most investigations on radiated fields, only the part of the electric field that is parallel to a spherical surface is taken into account. The argument is that only that component contributes to the radiated energy. Here we show that the phase front in the lower half space is not a spherical surface and hence, the radial components contribute to radiated energy. We show differences in radiation patterns for point electric dipoles and linear dipoles, either modeled as perfectly conducting wires or as resistively loaded wires. Our primary interest lies with improving image resolution through processing of Ground-Penetrating Radar data. Here the emphasis lies with understanding the radiation characteristics of linear dipoles that can be incorporated with image processing algorithms. The model uses a thin-wire approximation for the transmitter antenna. The solution to the discrete system of equations is solved, incorporating interaction between the interface, using a CGFFT scheme including symmetrization and a newly developed preconditioning operator. We look at the electric and magnetic fields as well as the time-averaged Poynting vector radiation patterns in the E-plane and H-plane of the transmitting antenna. The results show that the radial component of the radiated electric and magnetic field is not negligible, even at distances more than seven wavelengths away from the antennas.     

紧凑型FLC光纤PDL模块

描述了紧凑型FLC（铁电液晶）光纤PDL（光子延迟线）模块的结构和运转特性；分析了插入损失；提出多信道运转时依赖于波长的设计方案。     

准八木型宽带微带天线单元的设计

利用三维电磁场仿真软件(Ansoft HFSS)对准八木型微带天线单元进行了仿真计算.研究了天线结构参数对天线性能的影响.最后得到一个良好的设计。实验结果与计算值相吻合。     

天线方向图的复射线仿真

根据复射线理论，利用复源点高斯波束场来模拟天线的远场方向图。本文提出三种模拟方法，即主瓣匹配法，峰值匹配法和逐点匹配法，给出了多种方向图的仿真结果。数值分析和优化结果表明，复射线峰值匹配法是一种精确实用的天线方向图仿真技术。     

计算抛物面天线支杆对方向图影响的简化方法

本文基于物理光学球面波展开法，提出一种计算抛物面天线支杆对其方向图影响的简化方法，文中导出了计入支杆散射的天线辐射方向图的解析表达式，并给出了支杆对其方向图旁瓣电平影响的计算实例，数值结果表明，本文所提出的新方法不仅计算结果精度高，而且所需计算机容量小，运算速度快，可应用于天线工程设计。     

机载隐蔽式短波天线研究

给出了一种用于Y7—200A运输机的隐蔽式短波天线，该天线为位于飞机垂尾前缘的回线天线，与飞机的外形共形，不影响飞机的飞行性能。在利用传输线理论与缝隙天线理论对该天线进行分析的基础上，对输入阻抗、天线与天线调谐器结合后的天线效率进行了研究，给出了该天线与KHF950电台相配合的测试试验结果，该天线能够在2．5MHz到30MHZ范围内与KHF950电台良好调谐，表明这种天线完全可以用于Y7—200A型飞机，代替原有的钢索天线。这是在国产飞机上首次使用这种天线。     

一种多波束面阵天线的分析与设计

介绍了二维多波束天线的特点和实现二维多波束的几种方法，针对空馈的Rotman透镜推导出了由它馈电的平面天线阵的相位计算公式及设计方法，在此基础上成功地实现了空馈透镜的平面天线阵样机，并给出了相应的测试结果。     

FAFFA加速的PO-MM研究复杂金属载体上线天线电磁特性

本文提出了一种快速远场近似(FAFFA)加速的混合物理光学矩量法(POMM),利用FAFFA加速计算矩阵方程中的矩阵矢量积,明显提高了计算效率.对物体表面上的远场组之间的耦合作用推导出了一组简洁的计算公式,并分析了计算复杂度.复杂金属组合体上线天线输入导纳、互导纳和方向性图的计算结果与文献结果一致.利用该方法分析计算了一个舰船模型上线天线的电磁特性.数值结果表明了这种方法的正确性和工程应用中的有效性.     

浅谈移动通信基站天线系统设计

对基站天线的基本原理、天线选型、天线参数设置、天线安装等方面进行了描述，对天线下倾角、分集距离等进行了重点讨论。