一种智能型的PCB产业需求预测方法

目前需求预测在整个印制电路板产业的生产活动控制中正扮演着越来越重要的角色。分析了影响印制电路板需求的因素和现有的预测方法,提出了一种适用于PCB产业需求预测的有效方法——遗传/BP—神经网络。实验表明该方法能够进一步改善印制电路板预测的准确度和减少生产成本的消耗。     

无线通信中的空时分组码

空时分组码技术结合信道编码、调制和天线分集技术,当发送天线一定时,他的解码复杂度正比于发送速率,在3G标准中,该技术有着重要的地位。对空时分组码及相关知识进行了介绍,并对可变速率的空时分组码设计进行了探讨,最后展望了空时分组码技术的应用前景。     

Study of elastic wave propagation induced by piezoelectric actuators for crack identification

The current paper provides a theoretical study of elastic wave propagation in a cracked elastic medium induced by an embedded piezoelectric actuator. The formulation of the problem is based on a newly developed actuator model and the solution of coupled crack and actuator problems. The interaction between an actuator and a crack is studied to develop basic understanding of the effect of the crack upon the wave field generated. The resulting wave field is used to simulate 'sensor signals'. Scattered wave from the crack is then regenerated by solving a reverse elastodynamic problem and used in an imaging technique to identify the crack.     

介质波导阵列的横向传播特性分析

根据已提出的有关二维周期介质严格分析理论，针对介质波导阵列进行了大量的数值计算。对介质波导阵列中波的横向传播作了详细分析。首先，在给定纵向波矢量(k)的情况下，分析了在不同工作频率时的横向波矢量间布里渊区色散特性，对空间谐波的相互作用情况也进行了研究。其次，在给定工作频率的情况下，分析了不同纵向波矢量和不同调制系数时的横向波矢量间布里渊区色散特性。由于空间谐波的相互作用随纵向波数或调制系数的增大而增强，导致阻带能明显地表现出来，从而使介质波导阵列的横向传播特性能较为全面地得到分析。     

Wavefront reduction using graphs,neural networks and genetic algorithm

This paper presents an algorithm for nodal numbering in order to obtain a small wavefront. Element clique graphs are employed as the mathematical models of finite element meshes. A priority function containing five vectors is used, which can be viewed as a generalization of Sloan's function. These vectors represent different connectivity properties of the graph models. Unlike Sloan's algorithm, which uses two fixed coefficients, here, five coefficients are employed, based on an evaluation by artificial neural networks. The networks weights are obtained using a simple genetic algorithm. Examples are included to illustrate the performance of the present hybrid method. Copyright © 2004 John Wiley & Sons, Ltd.     

市区微蜂窝传播路径损耗模式的比较检验

讨论了几种微蜂窝路径损耗模式,并用我国某城市测量的微蜂窝传播数据对COST231WI,修正COST231WI和Xia模式进行了检验,结果表明修正COST231模式的误差最小,Xia模式次之,COST231WI模式最差。从而得到修正COST231模式比较符合我国实际的微蜂窝传播预测模式。     

一种改善Turbo乘积编码OFDM系统性能的新方法

本文提出一种利用对译码器软信息限幅来改善多径衰落信道中Turbo乘积编码OFDM(TPC-OFDM)系统性能的新方法。通过对不同多径衰落信道中QPSK映射和16QAM映射的TPC-OFDM系统性能的数值仿真，结果表明在10^-5误比特率下，这种新方法比传统的迭代译码大约有6～10dB的改进，对严重多径环境下TPC-OFDM系统的错误平底也有明显的改进。     

关于海面无线传播模型的探讨

现有文献中一般都认为海面环境的无线传播模型近似于自由空间传播模型，但在实际测试中发现，自由空间模型预测值与实测值差别较大，不能很好地解释此类环境的信号传播。笔者根据多次海面覆盖测试的数据，分析并拟合出了新的海面传播模型。     

Thin hard coatings fracture propagation during the impact test

One of the most significant applications of the impact test is to investigate thin hard coatings fatigue properties. Herein the test conditions and duration up to the film damage initiation, are considered in order to determine the critical stresses associated with the coating fatigue strength. Moreover, the subsequent film damage propagation is a significant mechanism as well, since it refers to the ability of the coating to withstand loads after its fatigue damage initiation. In order to describe the film fracture propagation the failed area ratio was introduced and an algorithm to determine this magnitude developed, based on the analysis of imprint scanning electron microscopy graphs. The application of the coating failed area ratio will be demonstrated in various impact test film cases, also with superficial thin layers. The top layers do not affect, in general, the failure initiation of the basic coating. However, according to the obtained results, the superficial films influence the basic coating failure propagation rate during the impact test.     

Elastoplastic modelling of subsurface crack growth in rail/wheel contact problems

Propagation of small subsurface cracks subjected to shear under repeated rolling contact load is studied. An analytical crack model (Dugdale) with plastic strips at the two crack tips is employed. Compressive stresses promoting crack closure and friction between crack faces are considered. The triaxial stress state is used in the yield criterion. A damage criterion is suggested based on experimental LCF data. In a numerical study, critical crack lengths are found below which propagation of an existing crack should be effectively suppressed.