场激活加压燃烧合成WC-Ni复合材料的工艺参数研究

以钨、碳和镍为原料,在电场激活下,材料的燃烧合成和致密化同时进行,短时间内完成了碳化钨镍复合材料的制备。研究了场激活 加压燃烧合成中的工艺参数,如脉冲电流、能量控制模式、升温速率、最高温度和压力对反应的影响。测量了在反应合成和致密化前后的样品 收缩率。所制备的复合材料的相对密度,490N载荷下Vickers硬度和断裂韧性分别为99.2%,13.965GPa和5.9MP·m1/2。     

熔融碳酸盐燃料电池阴极材料的导电性

通过交流阻抗方法研究了熔融碳酸盐燃料电池阴极材料锂镍氧化物、锂钴氧化物和锂铁氧化物的导电性能。结果表明:锂镍氧化物电极的导电性最好,锂钴氧化物电极的导电性次之,锂铁氧化物电极的导电性最差;它们的导电性都随着温度的升高而按指数规律增加;在合成锂钴氧化物(或锂铁氧化物)的过程中,使Li2CO3轻微过量,可以提高锂钴氧化物(或锂铁氧化物)电极的导电性,而且在同一温度下,随着nLi∶nCo(或nLi∶nFe,摩尔比)值的增大,锂钴氧化物(或锂铁氧化物)电极的导电性显著增加。     

CO2泡沫压裂优化设计技术及应用

针对苏里格低压、低渗透气藏常规水基压裂液压后返排困难,导致储层水锁伤害的问题,研究利用CO2泡沫压裂来降低压裂液滤失,提高压裂液返排率,降低对储层的伤害。有针对性地研究了CO2泡沫压裂优化设计技术,包括:CO2泡沫压裂起泡技术、酸性交联技术、变泡沫质量和恒定内相设计技术等。现场应用表明,长庆苏里格气田气藏应用CO2泡沫压裂技术,可大大提高返排率,缩短压裂液返排时间,降低压裂液对气层的伤害,提高压裂效果。     

泡沫酸化工艺对川中低压裂缝性油藏适应性的认识

针对川中油田经过多年的消耗式开采,各主产油田压力很低,增产改造的难度增大的发展现状,提出应用泡沫酸化工艺技术在川中低压油层增产改造的技术方案,其中分析了泡沫酸的物理特性、其在地层优良的渗流特性(滤失小、酸岩反应速度慢、返排迅速等优点),并进行了泡沫酸液体系的室内配方研究,提出了工艺设施的矿场配套研究内容.得出了泡沫酸化工艺对川中低压裂缝性油藏改造具有很强的适应性,具有推广应用的价值.     

国产活性炭在合成气净化中的应用

选择国产Ｋ０１活性炭脱除羰基铁、镍，以达到保护铑催化剂并减少副产物的目的。１年的实际应用结果表明：国产Ｋ０１活性炭能够替代进口活性炭在合成气净化中应用。     

聚氨酯泡沫夹克管生产材料的代用

介绍一种用于生产聚氨酯泡沫夹克管保温层的新材料聚酯聚醚，报道选用这种材料生产泡沫夹克管的工艺及工要工艺参数和产品达到的技术指标及现场应用情况。     

Effects of molybdenum additions on the structure, depth, and austenite grain size of the case of carburized 0.13% carbon steels

Carbon (0.13%) steel samples containing about 0.48% molybdenum (Mo) singly and in combination with nickel (Ni) were carburized in a natural Titas gas atmosphere at a temperature of 1223 K (950 °C) and at a pressure of about 0.10 MPa (15 psia) for time periods ranging from 1–4 h followed by slow cooling in the furnace. Their microstructure was studied by optical microscopy. The austenite grain size of the case and the case depths were determined. It was found that Mo and Ni alone and in combination decrease the thickness of the cementite network near the surface of the carburized case of the steels. However, Ni is found to be more effective than Mo in decreasing the thickness of cementite network. Both Mo and Ni enhance the formation of Widmanstätten cementite plates at the grain boundary and within the grains near the surface of the carburized steels. However, Ni alone is more effective than Mo in the formation of Widmanstätten cementite plates. In the presence of Ni, Mo is much more effective in the formation of Widmanstätten cementite plates than Mo in absence of Ni. It was also revealed that both Mo and Ni increased the case depth. Ni is more effective than Mo in increasing the case depth. The combined effect of Mo and Ni is much greater than that of either Mo or Ni alone in increasing case depth. Mo as Mo carbide (Mo₂C) particles refined the austenite grain size of the carburized case. Ni in solution was not found to have any effect in restricting grain growth of austenite, but the presence of Ni enhances the austenite grain size refining effect of Mo in the carburized case.     

The influence of various reaction parameters on the performance of (α‐diimine)nickel(II) catalysts in ethylene oligomerization reactions

Modified (α‐diimine)nickel(II) catalysts are suitable for ethylene oligomerization reactions. Due to the mechanism (“chain running”), the formation of double‐bond isomers and branched olefins can be observed. The obtained oligomer mixtures show a Schulz–Flory distribution. Increasing ethylene pressure favors the selectivity of α‐olefin formation. The same effect can be observed when Lewis bases like thiophene or furane are added to the oligomerization reaction mixture. These results can be related to an interaction of the additives with the catalytic active species during the oligomerization process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1356–1361, 2003     

Ni的添加对TiB2-CU基复合材料微观组织的影响

利用燃烧合成工艺原位合成了TiB2-Cu基复合材料，为了改善TiB2陶瓷和Cu基体的润湿性，将金属Ni作为合金化元素加入到TiB2-Cu复合材料。通过XRD，SEM，EPMA和TEM等检测手段对金属Ni的添加对TiB2-Cu基复合材料微观组织的影响进行了研究。结果表明，含Ni复合材料的金属粘结相的面间距比不含Ni时Cu的面间距均有不同程度的减小；Ni加入后，TiB2-Cu-Ni复合材料的组织较TiB2-Cu复合材料更加致密，但陶瓷颗粒尺寸却大于TiB2-Cu复合材料的颗粒尺寸；Ni的加入降低了复合材料的导热率和冷却速度，使得部分TiB2陶瓷颗粒有足够的时间长成棒状，同时造成TiB2陶瓷颗粒间形成更多的烧结颈；Ni的加入也改善了陶瓷与金属粘结相之间的润湿性，使陶瓷相与金属粘结相的界面结合牢固，看不到TiB2-Cu复合材料中界面脱开的现象。金属Ni的添加有利于改善TiB2-Cu基复合材料的微观组织，进而利于复合材料的致密化。     

The electropolymerization of pyrrole at a CuNi electrode: corrosion protection properties

Pyrrole was successfully electropolymerized at a copper–nickel electrode in a near-neutral sodium oxalate solution containing Cu²⁺ cations to generate a homogenous and adherent polypyrrole film. The presence of the Cu²⁺ ions increased both the rate of the electropolymerization reaction and the adherence of the polymer at the CuNi interface. In the absence of these cations, oxidation of the electrode occurred generating a nickel-rich layer that was not sufficiently conducting, under the electropolymerization conditions employed, to facilitate the electron-transfer reaction and the electropolymerization of pyrrole.These films remained stable and exhibited significant corrosion protection properties in acidified and neutral 0.1 mol dm⁻³ NaCl solutions even on polarization of the electrodes to high anodic potentials.