Comparison of inward and outward grown Pt modified aluminide diffusion coatings on a Ni based single crystal superalloy

Two commercial Pt modified aluminide coatings (RT22 and MDC150L) on the same single crystal Ni-based superalloy (CMSX-4) were studied by: scanning electron microscopy; transmission electron microscopy; energy dispersive X-ray spectrometry; and gravimetry. The RT22 coating is an inward grown coating (high activity), while MDC150L is produced by outward growth (low activity). Samples were oxidised in still laboratory air at 1050 °C for various times up to 2000 h. It was found that the outward grown coating produced a slower growing oxide that was more spallation resistant. Several possible reasons for this were identified including: coating purity; coating surface topography; and ductile to brittle transition temperature. The microstructural differences between the two coatings in the as-coated condition were investigated and the development of their microstructure during heat treatment was described. A model for coating growth during heat treatment was proposed.     

磷钨酸乙醇染色法在嗜铬颗粒电镜X射线显微分析中的应用

通过比较常规透射电镜制样法、快速冷冻固定－冷冻超薄切片法及磷钨酸乙醇（EPTA）染色法在嗜铬颗粒透射电镜X射线显微分析中的应用，发现磷钨酸乙醇染色法能使嗜铬颗粒电子着色，从而较好地显示嗜铬颗粒的超微结构。同时磷钨酸乙醇染色法也以在一定程度上原位保留生物样品中元素，可以应用于检测样品元素含量的变化或比较样品元素含量的组间差别，提示磷钨酸乙醇染色法是一种可应用于透射电镜X射线显微分析的经济简便的生物样品制备方法。     

全站仪在直升机悬停测试中的应用

介绍了如何将改造后的全站仪应用于直升机悬停性能测试的方法。经真实飞行试验检验，该方法理论严密，方案合理，改装简单，操作方便，成本低廉。较之原始的摄影测量法有无法替代的优点。     

Si1-xGex/Si应变材料的生长及热稳定性研究

利用分子束外延（MBE）技术生长了Ge组份为0.1-0.46的Si1-xGex外延层。X射线衍射线测试表明，SiGe/Si异质结材料具有良好的结晶质量和陡峭界面，其它参数与可准确控制。通过X射线双晶衍射摆曲线方法，研究了经700℃、800℃和900℃退火后应变SiGe/Si异质结材料的热稳定性。结果表明，随着退火温度的提高，应变层垂直应变逐渐减小，并发生了应变弛豫，导致晶体质量退化；且Ge组分越小，Si1-xGex应变结构的热稳定性越好；室温下长时间存放的应变材料性能稳定。     

反原形向量化与拟离散性

如何利用循环体诸如初值、终值、步长和下标式等数学对象的诸如恒等、正负、单调性一类的数学特征,按照严格推导出来的简单规则,绕过各种复杂的数据依赖关系图及其上诸如拓扑排序或等价变换等复杂的操作,直接从事向量化处理,这是极富实用价值的研究方向.文献[2,3,5]给出的可原形/准原形算法,以及本文的可反原形与拟离散性,正是这样的捷径.它们能使相当部分的常见循环,直接向量化.     

Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured. Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.     

Local Exact Particle Tracing on Unstructured Grids

For analyzing and interpreting results of flow simulations, particle tracing is a well established visualization method. In addition, it is a preliminary step for more advanced techniques such as line integral convolution. For interactive exploration of large data sets, a very efficient and reliable particle tracing method is needed. For wind channel experiments or flight simulations, large unstructured computational grids have become common practice. Traditional approachs, based on numerical integration methods of ordinary differential equations however fail to deliver sufficiently accurate path calculation at the speed required for interactive use. In this paper we extend the local exact approach of Nielson and Jung in such a way that it can be used for interactive particle tracing in large data sets of steady flow simulation experiments. This will be achieved by sophisticated preprocessing using additional memory. For further visual enhancement of the streamline we construct an implicitly defined smooth Bézier curve that is used for ray tracing. This allows us to visualize additional scalar values of the simulation as attributes to the trajectory and enables the display of high‐quality smooth curves without creating any visualization geometry and providing a good impression of the spatial situation at the same time. ACM CSS: I.3.3 Computer Graphics—Line and curve generation; I .3.7 Computer Graphics—Raytracing; G.1.2 Numerical Analysis—Spline and piecewise polynomial approximation     

A Progressive Radiosity Algorithm for Scenes Containing Curved Surfaces

Based on the theory of light energy transfer between two differential diffuse surface areas, a generalized radiosity approach is presented. Unlike the conventional radiosity method, curved surfaces are subdivided into triangular surface patches, radiosity is assummed to be vary across each triangular surface patch. By adopting linear interpolation scheme over each triangular surface patch, we have established a complete set of approximated radiosity equations. Their unknowns are radiosities of differential surface areas located at all vertices of surface patches. The generalized radiosity equation has also been extended to non-diffuse environments. Theoretical analysis and experimental results demonstrate the great potential of this method,     

A Ray-Tracing Analysis of ICRH in Tokamaks

Power deposition profiles generated by Ion Cyclotron Resonance Heating （ICRH） in non-circular tokamaks are studied using a ray-tracing technique. The simulation results for the Experimental Advanced Superconductor Tokamak （EAST） D-shaped plasma are presented. It is indicated that the spatial distributions of plasma parameters （plasma density, species temperature, minority ion concentration, etc.） have an significant influence on the power deposition profiles. The findings may be highly useful to the planned plasma heating and experiments in EAST.     

复射线展开法分析圆柱面对平面波散射的精度问题

讨论了用复射线展开法计算圆柱面对入射平面波散射时的计算误差特性，提出了控制其计算精度的复射线展开参数选择方法，证实了通过恰当选择展开参数可以有效地提升计算精度、实现误差控制。