Artificial bee colony based algorithm for maximum power point tracking (MPPT) for PV systems operating under partial shaded conditions

Artificial bee colony (ABC) algorithm has several characteristics that make it more attractive than other bio-inspired methods. Particularly, it is simple, it uses fewer control parameters and its convergence is independent of the initial conditions. In this paper, a novel artificial bee colony based maximum power point tracking algorithm (MPPT) is proposed. The developed algorithm, does not allow only overcoming the common drawback of the conventional MPPT methods, but it gives a simple and a robust MPPT scheme. A co-simulation methodology, combining Matlab/Simulink™ and Cadence/Pspice™, is used to verify the effectiveness of the proposed method and compare its performance, under dynamic weather conditions, with that of the Particle Swarm Optimization (PSO) based MPPT algorithm. Moreover, a laboratory setup has been realized and used to experimentally validate the proposed ABC-based MPPT algorithm. Simulation and experimental results have shown the satisfactory performance of the proposed approach.     

Study on maximum power point tracking of photovoltaic array in irregular shadow

Traditional maximum power point tracking (MPPT) methods can hardly find global maximum power point (MPP) because output characteristics curve of photovoltaic (PV) array may have multi local maximum power points in irregular shadow, and thus easily fall into the local maximum power point. To address this drawback, Considering that sliding mode variable structure (SMVS) control strategy have such advantages as simple structure, fast response and strong robustness, and P&O method have the advantages of simple principle and convenient implementation, so a new algorithm combining SMVS control method and P&O method is proposed, besides, PI controller is applied to reduce system chattering caused by switching sliding surface. It is applied to MPPT control of PV array in irregular shadow to solve the problem of multi-peak optimization in partial shadow. In order to verity the rationality of the proposed algorithm, the experimental circuit is built, which achieves MPPT control by means of the proposed algorithm and P&O method. The experimental results show that compared with the traditional P&O algorithm, the proposed algorithm can fast track the global MPP, tracking speed increases by 60% and the relative error decreased by 20%. Moreover, the system becomes more stable near the MPP, the fluctuations of output power is greatly reduced, and thus make full use of solar energy.     

卫星激光通信粗跟踪系统复合控制策略

针对卫星激光通信粗跟踪系统的跟踪稳定精度指标要求高的特点,建立了基于永磁同步电机直接驱动的粗跟踪系统模型并进行了跟踪稳定误差分析。在采用传统PID控制策略存在跟踪误差较大、动态性能较差等不足的基础上,提出了一种基于粗跟踪系统的改进型前馈复合控制策略。从理论上分析了前馈复合控制策略提高了粗跟踪系统的动态性能,为降低跟踪稳定误差提供了改善方案。地面实验验证结果表明,与传统控制策略相比,改进型复合控制策略极大地降低了系统的动态跟踪误差,动态跟踪误差由606μrad降低至13μrad(1δ)。进一步的在轨实验也验证了改进型复合控制策略的合理性和先进性,总体指标满足了卫星激光通信终端的极高精度要求。本文所提出的控制策略对其他高性能跟踪伺服系统设计也具有较大的借鉴意义。     

基于深度学习的视频跟踪研究进展综述

近年来深度学习迅猛发展，颠覆了语音识别、图像分类、文本理解等领域的算法设计思路。深度学习因其具备强大的特征提取能力，在图像识别领域的成绩尤为突出。然而深度学习与视频监控领域的结合并不多，由于深度模型具有多层网络结构，算法复杂度大，训练和更新模型时比较耗时，很难满足实时性要求。回顾了深度学习的发展史，介绍了最近10年来国内外深度学习主要模型，论述了基于深度学习的目标跟踪算法，指出了各算法的优缺点，最后对当前该领域存在的问题和发展前景进行了总结和展望。     

Passive target detection and tracking from electromagnetic field measurements

This paper presents a novel approach to the localization of moving targets in a complex environment based on the measurement of the perturbations induced by the target presence on an independently‐generated time‐varying electromagnetic field. Field perturbations are measured via a set of sensors deployed over the domain of interest and used to detect and track a possible target by resorting to a particle Bernoulli filter (PBF). To comply with real‐time operation, the PBF works along with an artificial neural network (ANN) model of the environment trained offline via finite elements (FEs). The performance of the proposed algorithm is assessed via simulation experiments.     

交流伺服系统在玻璃裂片机中的应用

随着运动控制技术的飞速发展，交流伺服系统应用的日益广泛。介绍了液晶生产中的关键设备玻璃裂片机，并详细分析松下MINAS A系列交流伺服系统在玻璃裂片机中的应用。     

基于服务器端会话追踪的Web查询服务的研究

在探讨了Web查询服务的典型模型后,论文阐述了服务器端会话追踪机制的实现方式,设计了基于服务器端会话追踪的Web查询服务的典型解决方案。该设计方案可以较为安全地保存和维护客户的上下文信息,可靠地跟踪用户查询所处的状态,有效地实现有状态的Web查询服务。     

以一种新的距离度量作为反馈的相关跟踪方法

基于相关的模板匹配方法在图像跟踪中得到了广泛的应用,但是这种方法的主要缺点是对图像噪声非常敏感,而且由这种方法得出的相关曲面比较平坦。为了有效抑制噪声和局部遮挡对图像的影响,提出用鲁棒统计中的一个值代替相关值作为距离度量。它不是计算两幅图像的对应像素差值,而是计算两幅图像中差别不大的对应像素对的个数。实验证明这样得到的曲面相对　　收稿日期:2003 08 31;　修订日期:2003 10 28作者简介:张桂林(1944 ),男,天津人,教授,博士生导师,主要研究方向为自动识别、人体生物统计特征识别、图像处理算法与系统性能评估等。　　　　　　　要尖锐得多。当上述的距离度量应用于跟踪过程中时,模板的合理更新对跟踪非常重要。基于上述的距离度量方法,提出了一种新的模板更新策略。利用两幅图像中近似像素在整修匹配模板像素中所占的比例大小决定加权系数。这种加权策略可以自适应地根据图像序列的变化选择更新相关模板,同时在一定程度上减小模板漂移的危险。     

用DSP实现多目标实时跟踪

介绍了在 TMS3 2 0 C62 0 3上实现 4个目标的快速跟踪技术。为了提高实时性和精确度 ,采用线性汇编优化实现。1个 3 2 0× 160主窗口的 DSP平均处理时间为 2 m s,3个 60× 60副窗口的 DSP平均处理时间各为 0 .4ms,实现了复杂背景下低对比度目标的快速跟踪。实验结果证明跟踪效果良好 ,解决了以前窗口开不大、跟踪速度慢的问题