回顶法灌注混凝土浆成桩工艺

探讨了回顶法灌注混凝土浆的成桩工艺，分析了影响混凝土浆灌注质量的主要因素，并给出了相应的技术参数和措施。     

Sirius叠前深度偏移在莺歌海盆地“泥拱模糊带”处理中的应用

在对Sirius叠前深度偏移软件应用开发的基础上,分析讨论了Sirius 2D叠前深度偏移速度模型建立、层析成像及演、叠前深度偏移以及深度聚焦等技术环节的基本原理,并以莺歌海盆地某测线的处理为例,具体分析了Sirius 2D叠前深度偏移处理的流程、主要参数及时效.文中还分析讨论了莺歌海盆地中央“泥拱带”叠前深度偏移处理的地质效果.实践表明,莺歌海盆地广泛发育的与“泥拱模糊带”有关的构造各有其特殊性,只有通过3D叠前深度偏移处理才能从根本上解决“泥拱模糊带”的成像问题.     

Effects of Surface Morphology and Composition Modification on Spectral Emissivity and Thermal Diffusivity Profile at High Temperatures

A new all-spectroscopic method for depth-resolved thermal diffusivity measurement of metallic specimens has been demonstrated. The method entails measurement of the mass entrained into a laser-produced plasma (LPP) plume in such a manner that the plume is representative of the specimen in elemental composition. Both the abundance of matter and its elemental composition are measured by time-resolved spectroscopy for each LPP plume. In order to delineate the morphology versus composition basis of the depth dependence, a new study on a Nichrome ribbon specimen heated by ohmic heating in a vacuum is presented. A set of depth-resolved thermal diffusivity measurements is carried out, while noting the attendant changes in the spectral emissivity and elemental composition at succeeding ablation layers. Additional measurements are carried out after the specimen has been treated under varying heating conditions. Preferential diffusion of chromium at high temperatures has been found to contribute to the dynamics of surface thermophysical properties at high temperatures. Representative LPP ablation is well suited for removal of surface impurities prior to thermophysical property measurements by the pulse heating technique.     

Disparity field and depth map coding for multiview 3D image generation

In the present paper techniques are examined for the coding of the depth map and disparity fields for stereo or multiview image communication applications. It is assumed that both the left and right channels of the multiview image sequence are coded using block- or object-based methods. A dynamic programming algorithm is used to estimate a disparity field between each stereo image pair. Depth is then estimated and occlusions are optionally detected, based on the estimated disparity fields. Spatial interpolation techniques are examined based on the disparity/depth information and the detection of occluded regions using either stereoscopic or trinocular camera configurations. It is seen that the presence of a third camera at the transmitter site improves the estimation of disparities, the detection of occlusions and the accuracy of the resulting spatial interpolation at the receiver. Various disparity field and depth map coding techniques are then proposed and evaluated, with emphasis given to the quality of the resulting intermediate images at the receiver site. Block-based and wireframe modeling techniques are examined for the coding of isolated depth or disparity map information. Further, 2D and 3D motion compensation techniques are evaluated for the coding of sequences of depth or disparity maps. The motion fields needed may be available as a byproduct of block-based or object-based coding of the intensity images. Experimental results are given for the evaluation of the performance of the proposed coding and spatial interpolation methods.     

用光谱辐射计测量大气光学厚度的研究

本文给出了用光谱辐射计VF921-256测量大气光学厚度的实验结果，并对其与太阳辐射计DTF-1的同步测量结果进行了比对。实验结果表明：在比较好的大气条件以及对VF921-256测量中所应用的参考板的非朗伯特性进行校正后，两种方法的测量结果符合得较好。因此，在一定的误差范围内，VF921-256可以用于辐射校正中对大气光学厚度的同步测量。最后，本文对上面两种方法各自的测量误差也进行了进一步的分析讨论。     

柳海矿运输大巷返修工程深部软岩支护设计研究

通过现场调查、室内试验以及理论分析,柳海矿运输大巷支护现状进行分析研究,总结破坏原因。根据现场工程地质条件、岩石特性和破坏特点,确定软岩变形力学机制为高应力膨胀性软岩,并提出采用预留刚隙柔层支护技术进行支护。     

井下伴热电缆导体集肤效应的有限元法分析

运用有限元法, 对交频井下伴热电缆导体内部的集肤效应现象进行了数值模拟和分析,比较直观地得出交频电缆中电流密度的分布特性, 以及交流电的不同频率对导体集肤深度的影响。在集肤效应作用下, 电缆导体内部的有效过流面积减小, 交流阻抗显著加大, 其发热量也很大,井下电缆伴热加热技术就是利用这一原理来加热原油的。通过数值模拟, 可以定量地说明电参数对加热效果的影响, 为稠油井井下电缆伴热技术中优化加热参数提供指导。     

Effects of molybdenum additions on the structure, depth, and austenite grain size of the case of carburized 0.13% carbon steels

Carbon (0.13%) steel samples containing about 0.48% molybdenum (Mo) singly and in combination with nickel (Ni) were carburized in a natural Titas gas atmosphere at a temperature of 1223 K (950 °C) and at a pressure of about 0.10 MPa (15 psia) for time periods ranging from 1–4 h followed by slow cooling in the furnace. Their microstructure was studied by optical microscopy. The austenite grain size of the case and the case depths were determined. It was found that Mo and Ni alone and in combination decrease the thickness of the cementite network near the surface of the carburized case of the steels. However, Ni is found to be more effective than Mo in decreasing the thickness of cementite network. Both Mo and Ni enhance the formation of Widmanstätten cementite plates at the grain boundary and within the grains near the surface of the carburized steels. However, Ni alone is more effective than Mo in the formation of Widmanstätten cementite plates. In the presence of Ni, Mo is much more effective in the formation of Widmanstätten cementite plates than Mo in absence of Ni. It was also revealed that both Mo and Ni increased the case depth. Ni is more effective than Mo in increasing the case depth. The combined effect of Mo and Ni is much greater than that of either Mo or Ni alone in increasing case depth. Mo as Mo carbide (Mo₂C) particles refined the austenite grain size of the carburized case. Ni in solution was not found to have any effect in restricting grain growth of austenite, but the presence of Ni enhances the austenite grain size refining effect of Mo in the carburized case.     

锻坯材料利用情况分析

经过对锻坯需要扒皮(去掉锻造氧化皮)现状的调查,提出了解决扒皮问题的想法和建议。     

非均匀裂缝性油藏压力动态

在介绍具有连续基质颗粒大小分布和孔间表皮裂缝性油藏的不稳定压力分析模型的同时。提出了代表实际变化的裂缝密度和均匀性油藏的基质岩块大小分布概率密度函数，给出Laplace空间井筒压力解。该理论通过裂缝跨度变化拓宽了以前的双孔隙油藏模型，在不考虑孔间表皮的情况下，对非均匀裂缝性油藏压力动态进行了分析。