稀疏脉冲反演技术在井间地震反演中的应用

将传统的波阻抗反演技术应用于井间地震资料反演时，存在着方法适用的域和资料的域不同，井间地震资料的频带比地震资料的频带宽以及频率比地震资料频率高，多对井间地震资料拼接等问题。为此，在胜利油田K71井区，探讨了利用传统波阻抗反演技术（稀疏脉冲反演）进行井间地震资料波阻抗反演的一些技术问题，并用利11对井间地震资料进行了波阻抗反演，获得了较好的反演结果，在井间地震资料反演中，采用匹配滤波方的井间地震资料转换到时间域；利用高分辨率地面三维地震资料，采用统计方法提取反演子波，子波的波形和相位较稳定，频带宽；对测井资料进行标准化处理，在反演的波阻抗剖面上砂体的空间展布形态清晰，对储层的描述更精细；利用时深转换模型，将时间域的波阻抗剖面转换到深度域，直接与测井资料进行对比分析，对储层的描述更直观可靠。     

高性能小型扫描器

本文讨论了一种高性能小型扫描器的基本原理及扫描时序变换。对采用该小型扫描器的热成像系统也作了详细的介绍。该小型扫描器可满足多种用途。     

优化非致冷红外探测器设计的理论模型

文章建立了一种改进非致冷红外探测器性能的数学模型，分析了探测器结构和噪声对于噪声等效温差NETD的影响，并给出了NETD与探测器温度TD，背景温度下TB，热导G以及探测单元面积A等因素的关系曲线，指出了探测器性能改进和优化的途径。     

一种红外成像系统作用距离试验评估方法

进行红外成像系统作用距离考核试验时，由于外场试验中的目标特性及气象条件与指标提出对应的目标特性及气象条件有差别，因此需要进行必要的折算。提出一种基于信噪比准则的可行的红外成像系统作用距离试验评估方法。     

A new surface characterization technique: RIMAPS (Rotated Image with Maximum Average Power Spectrum)

This work introduces a new imaging technique, Rotated Image with Maximum Average Power Spectrum (RIMAPS), for use in determining orientation and characteristics of surface topography. It consists of computing the maximum value of the averaged power spectrum, given by one step of the two‐dimensional Fourier transform, for each angle of rotation of a digitized image. The basic measurement science of this technique is described and different cases are studied. The characterization of simple geometrical figures explains the meaning of peaks and their angular positions given by RIMAPS analysis. A known surface pattern made on a sample of pure copper, mechanically ground, is used to study reproducibility, dependence on image quality and topography scale relative to pixel size and magnification. Samples of pure zinc, mechanically ground and chemically etched, were used to show the main features of RIMAPS analysis when characterizing a more complicated pattern on a real surface. All the studies performed under different conditions for observation and acquisition of images give strong evidence of the stability and robustness of RIMAPS as a technique for the characterization of topography.     

MR imaging of focal liver lesions: comparison between turbo spin-echo and conventional spin-echo pulse sequences

The aim of this study was to compare conventional spin-echo (CSE)T ₂-weighted (T2W) images with turbo spin-echo (TSE) T2W pulse sequences in their ability to detect focal liver lesions. Seventy-eight consecutive patients with focal liver lesions were entered into this study. All patients were imaged using the gradient-echo (GE) sequence with the breath-hold technique forT ₁-weighted (T1W) images, and CSE and TSE sequences for T2W images. Qualitative evaluation included lesion detection (number of lesions detected) and conspicuity (extent of visualization of lesional borders); quantitative evaluation included the signal-to-noise (S/N) ratio and the contrast-to-noise (C/N) ratio. TSE showed the best performance in terms of lesion detection; however, the difference between TSE and CSE was significant only in the case of benign cysts (p<0.01). Conspicuity was higher with TSE and CSE, and lower with GE. The S/N and C/N ratios of the two T2W sequences were also comparable, and better than those of GE. However, the combined use of GE and TSE resulted in improved lesion detection. The results show that, because the acquisition time is greatly reduced with TSE sequences, these should be considered as first-line approach to magnetic resonance imaging of the liver for the study of focal lesions.     

功率管焊接质量射线检测

介绍采用射线方法检测功率管芯片与基座之间的焊接质量。试验证明，选用合适的透照参数可使X射线照相和X射线实时成像对焊接部位的检测均得到较高的对比灵敏度，但X射线照相法成本低廉，一次可透照多个工件，效率高，为该功率管焊接质量的理想检测方法。     

Development of a fast neutron radiography converter using wavelength-shifting fibers

A fluorescent converter for fast neutron radiography (FNR) comprising a scintillator and hydrogen-rich resin has been developed and applied to electronic imaging. The rate of the reaction between fast neutrons and the converter is increased by thickening the converter, but its opaqueness attenuates emitted light photons before they reach its surface. To improve the luminosity of a fluorescent converter for FNR, a novel type of converter was designed in which wavelength-shifting fibers were adopted to transport radiated light to the observation end face. The performance of the converter was compared with that of a polypropylene-based fluorescent converter in an experiment conducted at the fast-neutron-source reactor YAYOI in the University of Tokyo.     

基于模型正演的叠前深度偏移

川西龙门山前缘构造非常复杂，逆掩推覆构造带构造形变强烈，构造幅度大，地层倾角陡，断块发育，波场复杂，速度横向变化大，常规叠后时间偏移处理成像效果较差。文章将地震资料模型正演技术应用到叠前深度偏移，探讨了一种有助于川西龙门山前缘逆掩推覆构造地震资料精确成像技术。先利用已有地震资料解释成果，根据地质任务建立二维地质模型，在此基础上进行射线追踪、模拟出单炮地震记录和自激自收剖面，从而对观测系统的最大炮检距、道间距等参数进行论证的一些实用方法，这些方法对地震资料采集具有很好的指导作用；然后根据这些结果，再比较准确地进行叠前深度偏移的初始速度模型建立，从而达到了复杂地表下复杂构造精确成像的目的。     

The computer: liberator or jailor of the creative spirit

A discussion of the historical and aesthetic questions raised by the Fine Arts community regarding the uses of the computer by artists, its limitations and its potential. Creating a texture and context for this discussion necessitated the weaving into this discussion the role of technology, science, mathematics, the humanities, and aesthetics in the visual arts.