Numerical solution of viscous flow past a solid sphere with the control volume formulation

The control volume formulation with the QUICK finite difference scheme is used to solveincompressible liquid flow past a solid sphere in terms of stream function and vorticity.Several tech-nical points are addressed on improving the accuracy and efficiency of numerical simulation of similarproblems of fluid flow.In particular,the importance of suitable specification of the distortion func-tion to enforcing the far field boundarv conditions is emphasized.     

突尼斯深海Oudna油田大排量气举工艺设计

为了快速高效的开发海上油气田,研究人工举升方案显得尤为重要。本文描述了Oudna油藏的地质特征、油藏条件及其流体物性。通过对Oudna油田的认识,从气源角度分析了采用燃烧废气作为气举气源的可行性并提出了气举开发的工艺流程。     

Volume phase transition of polyelectrolyte gels in dimethyl sulfoxide/ tetrahydrofuran mixtures

Copolymer gels were prepared from 2-(acrylamido)-2-methylpropanesulfonic acid (AMPS), N,N-dimethylacrylamide (DMAA, comonomer) and N,N′-methylenebis(acrylamide) (BIS). The mole fraction of AMPS were 0.2674 and 0.4318, respectively, with the same BIS mole fraction of 0.013. These gels with counterions H⁺, Na⁺, and K⁺ were swollen at 25°C in mixtures of dimethyl sulfoxide (DMSO) and tetrahydrofuran (THF). A volume phase transition was observed at the THF volume fraction of about 0.58, indicating that the volume phase transition in a polyelectrolyte gel occurs when the medium polarity decreases sufficiently for ion-pair formation. On changing the counterion, the fraction of DMSO in the solvent mixture which is required to initiate swelling decreases in the order Na⁺, H⁺, and K⁺, the same as for counterion condensation in identical gels.     

Investigation of free volume,interfacial, and toughening behavior for cyanate ester/bentonite nanocomposites by positron annihilation

Effects of filler on microstructure and toughening behavior of cyanate ester (CE)/bentonite (BT) nanocomposites with different content of BT have been studied by positron annihilation lifetime spectroscopy, X‐ray diffraction, transmission electron microscopy, dynamic mechanical analysis, etc. The interesting results found by PALS indicate that the size and concentration of the free volume holes and the apparent free volume fraction increased with increasing the content of BT, which indicates that adding nano‐layers to thermosetting materials can lead to the high crosslinking density structure “looser.” The experimental results reveal that the increases in size of free volume holes and apparent free volume fraction are related to the increasing conversion of cure reaction. On the other hand, the mechanism of toughening (by adding the nano‐clay to the thermosetting material) has been discussed by combining free volume and interfacial property. It is shown that, for the high crosslinking thermosetting material‐based nanocomposites, both the property of free volume and dispersion state of nano‐layers are the two key factors in determining toughening property. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1509–1515, 2006     

A fuzzy neural network approach for online fault detection in waste water treatment process

In this paper, an effective strategy for fault detection of sludge volume index (SVI) sensor is proposed and tested on an experimental hardware setup in waste water treatment process (WWTP). The main objective of this fault detection strategy is to design a system which consists of the online sensors, the SVI predicting plant and fault diagnosis method. The SVI predicting plant is designed utilizing a fuzzy neural network (FNN), which is trained by a historical set of data collected during fault-free operation of WWTP. The fault diagnosis method, based on the difference between the measured concentration values and FNN predictions, allows a quick revealing of the faults. Then this proposed fault detection method is applied to a real WWTP and compared with other approaches. Experimental results show that the proposed fault detection strategy can obtain the fault signals of the SVI sensor online.     

Molar volume and ultrasonic studies of europium soaps in mixed organic solvents

The ultrasonic velocity and density measurements of europium soaps in a mixture of benzene and methanol (3:2, vol/vol) were used to evaluate various acoustic parameters and molar volume and to determine the critical micelle concentration. The results showed that the ultrasonic velocity, specific acoustic impedance, molar sound velocity, and molar compressibility increase, and intermolecular free length, adiabatic Compressibility, and relative association decrease with increasing concentration and chainlength of the soap. The results were interpreted in terms of soap-solvent interaction.     

基于温度-应力试验的自生体积变形计算起点的研究

针对标准试验方法在混凝土自生体积变形计算起点方面尚存在的问题,本文以微膨胀抗冲磨混凝土为研究对象,对ASTM C1074活化能测试方法进行改进,获得更为准确的胶凝材料水化反应活化能,并基于活化能计算得到实际温度条件下试件的等效龄期;利用温度-应力试验的特点,以第一零应力对应的等效龄期作为自生体积变形的有效计算起点,在日本混凝土学会提出的混凝土自生体积变形模型基础上,以自生体积变形最大膨胀值作为分界点分段模拟分界点前后的变形,建立以温度-应力试验第一零应力时间为计算起点的自生体积变形模型,为准确建立抗裂机理模型提供参考依据。     

海上溢油漂移扩散的数值模拟

该文基于三维自由水面垂向分层动网格的Euler-Lagrangian模式,采用VC方式(Vertex-Centered)的非结构化有限体积方法离散三维浅水方程,模拟渤海的潮汐水流运动过程。以此为水动力背景场,采用油、水分离的Lagrangian粒子追踪模型,对渤海海域发生的溢油漂移扩散问题进行模拟。其油品的蒸发、乳化和溶解等风化作用以引入综合衰减系数的方式考虑。模型对油膜的漂移路径、厚度和面积进行了实时模拟和预测,用多个测站的同步连续实测值对水动力模式进行了参数率定与模型验证,油膜输运扩散的计算结果也与相关报告数据进行了对比,均吻合良好,说明模型具有较高的可靠性与重现性。     

考虑卸荷损伤的柱状节理岩体开挖特性研究

通过建立柱状节理岩体径向应力比与力学劣化系数的数学关系,获取柱状节理岩体卸荷损伤效应的定量表达式。结合FLAC~(3D)提出一种考虑卸荷损伤的柱状节理岩体开挖分析方法,实现岩体单元的力学参数在开挖过程中随实际应力状态得到动态调整。在此基础上开展柱状节理岩体试验洞的开挖特性分析。结果表明,考虑卸荷损伤的计算数据与实测数据基本吻合,试验洞围岩的位移、体积应变增量和塑性区均随开挖断面的逐步增加而增大,且呈边墙最大,底板次之,拱顶最小的分布规律。最后采用体积应变增量大于0.10%和塑性区作为岩体松弛的综合判别指标,其分析结果与钻孔声波测试数据相一致。     

城市径流总量控制指标分解及实现路径探索与实践

针对海绵城市径流总量控制目标,提出一种在城市规划体系中控制性详细规划和修建性详细规划阶段分解落实年径流总量控制率的方法。在控制性详细规划阶段分解径流总量控制指标时,分步骤先后确定各项低影响开发措施的面积率和下沉深度;在修建性详细规划阶段,配合径流总量控制指标分解结果,给出适宜的各项低影响开发措施的技术实施导则,以保证各单项指标的正确实施,并以某项目为例介绍了技术实施导则的构建方法。