MEMS高量程加速度传感器的动态特性分析

利用霍普金森杆激光干涉冲击试验台对实验室研发的MEMS高量程压阻式加速度传感器进行动态校准;采用两种不同解算方法对实验数据将进行分析处理,求解出该传感器的幅频特性,绘制了对数幅频特性曲线;通过对比两种算法的结果知道,镜像映射法优于FFT算法,其算法简单有效,能直接辨识出系统模型参数和模型阶次。     

基于信道估计的SC-FDMA自适应传输方案

由于SC-FDMA的峰均功率比（PAPR）比OFDMA低,因而被应用于3GPP LTE上行链路。论文分析了SC-FDMA传输系统的数学模型,介绍了基于导频的SC-FDMA系统最小二乘（LS）和线性最小均方误差（LMMSE）信道估计算法。在比较该系统集中式和分布式两种子载波映射方式在高低速不同移动环境下传输性能的基础上,提出了一种基于信道估计的SC-FDMA系统自适应传输方案。经仿真证实该方案比单纯采用一种子载波映射的方法性能更加优越,在相同的误码率情况下,能够节省大概3dB左右的信噪比。     

模型桥墩局部冲刷瞬时地形数据自动获取装备研制

模型试验中冲刷地形测绘装备相对落后,致使桥墩周围局部冲刷瞬时地形数据无法实时获取,冲刷动态发展过程及机理的模型试验研究工作难以开展。研制了一种模型桥墩局部冲刷瞬时地形数据等值线自动绘制装备,并利用室内水工模型试验优化了各组成的性能指标,量化了绘制装备的设计参数,分析了监测系统在模型应用中的测绘精度及在工程原型中的适用性。模型试验研究表明,该装备结构简单,操作方便,加工制作成本较低,精度及灵敏性较高,能够快速获取动态过程中局部冲刷瞬时地形等值线,适用于局部冲刷发展影响流场特性研究中的水下地形快速测绘,也可按放大比尺制作成型后应用于涉水建筑物周围水下地形监测。     

3D human pose estimation in motion based on multi-stage regression

3D human pose estimation in motion is a hot research direction in the field of computer vision. However, the performance of the algorithm is affected by the complexity of 3D spatial information, self-occlusion of human body, mapping uncertainty and other problems. In this paper, we propose a 3D human joint localization method based on multi-stage regression depth network and 2D to 3D point mapping algorithm. First of all, we use a single RGB image as the input, through the introduction of heatmap and multi-stage regression to constantly optimize the coordinates of human joint points. Then we input the 2D joint points into the mapping network for calculation, and get the coordinates of 3D human body joint points, and then to complete the 3D human body pose estimation task. The MPJPE of the algorithm in Human3.6 M dataset is 40.7. The evaluation of dataset shows that our method has obvious advantages.     

Response correction techniques for surrogate‐based design optimization of microwave structures

Simulation‐based optimization has become an important design tool in microwave engineering. However, using electromagnetic (EM) solvers in the design process is a challenging task, primarily due to a high‐computational cost of an accurate EM simulation. In this article, we present a review of EM‐based design optimization techniques exploiting response‐corrected physically based low‐fidelity models. The surrogate models created through such a correction can be used to yield a reasonable approximation of the optimal design of the computationally expensive structure under consideration (high‐fidelity model). Several approaches using this idea are reviewed including output space mapping, manifold mapping, adaptive response correction, and shape‐preserving response prediction. A common feature of these methods is that they are easy to implement and computationally efficient. Application examples are provided. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Efficient design of SIW filters with knowledge‐embedded space mapping technique

This article presents an optimization technique for the design of substrate‐integrated waveguide (SIW) filters using knowledge‐embedded space mapping. An effective coarse model is proposed to represent the SIW filter. The proposed coarse model can be analyzed in the available commercial software ADS. The embedded knowledge includes not only formulas but also extracted design curves, which help to build the mapping between the coarse and fine models. The effectiveness of the proposed method is demonstrated through a design example of a six‐pole SIW filter. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

SVM-based ontology matching approach

There are a lot of heterogeneous ontologies in semantic web, and the task of ontology mapping is to find their semantic relationship. There are integrated methods that only simply combine the similarity values which are used in current multi-strategy ontology mapping. The semantic information is not included in them and a lot of manual intervention is also needed, so it leads to that some factual mapping relations are missed. Addressing this issue, the work presented in this paper puts forward an ontology matching approach, which uses multi-strategy mapping technique to carry on similarity iterative computation and explores both linguistic and structural similarity. Our approach takes different similarities into one whole, as a similarity cube. By cutting operation, similarity vectors are obtained, which form the similarity space, and by this way, mapping discovery can be converted into binary classification. Support vector machine (SVM) has good generalization ability and can obtain best compromise between complexity of model and learning capability when solving small samples and the nonlinear problem. Because of the said reason, we employ SVM in our approach. For making full use of the information of ontology, our implementation and experimental results used a common dataset to demonstrate the effectiveness of the mapping approach. It ensures the recall ration while improving the quality of mapping results.     

Polynomial approximation of functions of matrices and applications

In solving a mathematical problem numerically, we frequently need to operate on a vector by an operator that can be expressed asf(A), whereA is anN ×N matrix [e.g., exp(A), sin(A), A^–-]. Except for very simple matrices, it is impractical to construct the matrixf (A) explicitly. Usually an approximation to it is used. This paper develops an algorithm based upon a polynomial approximation tof (A). First the problem is reduced to a problem of approximatingf (z) by a polynomial in z, where z belongs to a domainD in the complex plane that includes all the eigenvalues ofA. This approximation problem is treated by interpolatingf (z) in a certain set of points that is known to have some maximal properties. The approximation thus achieved is almost best. Implementing the algorithm to some practical problems is described. Since a solution to a linear systemAx=b isx=A ^–1 b, an iterative solution algorithm can be based upon a polynomial approximation tof (A)=A ^–1. We give special attention to this important problem.     

多级小波分解与LBP融合的纹理提取算法

为提高不同光照、不同角度条件下的纹理识别精度,提出了一种利用多级小波分解和多尺度旋转不变LBP融合的纹理提取算法。算法在传统的LBP特征提取基础上,采用多尺度的旋转不变LBP算子分别对多级小波逼近图像提取直方图序列特征向量,与各级小波能量进行加权融合,获取更多的纹理信息,对光照和角度的变化有更高的鲁棒性。仿真结果表明,相对传统的LBP特征提取算法,改进的算法具有更高的纹理识别率。     

多水平外区抑制的轮廓检测

提取自然图像中的物体轮廓是机器视觉研究的重要问题,主要困难在于自然图像中的纹理性边缘严重干扰了物体轮廓的提取。研究表明视皮层方位选择性神经元的非经典感受野机制使得人类视觉系统在处理自然图像时不仅能够抑制纹理性边缘,而且能够增强物体的轮廓。基于此人们提出多种仿生轮廓检测算法,但算法中被称为抑制水平的参量在取值较高时会漏检部分轮廓,而在其取值较低时又会引入过多的纹理性边缘。针对这一问题,提出多水平外区抑制轮廓检测算法,通过整合各级单水平外区抑制的检测信息,有效抑制了纹理性边缘和降低了漏检轮廓的可能性。实验结果表明,相对于传统算法,新算法在轮廓检测性能上提高了10%左右,并具有更好的稳健性。