40CrNi2Si2MoVA钢制零件磁痕显示分析

本文采用磁粉、X射线、CT和超声等无损检测和金相分析等方法对40CrNi2Si2MoVA钢制零件的磁痕显示进行了系统分析.研究认为,40CrNi2Si2MoVA钢制零件的磁痕显示为显微成分沿变形方向偏析导致的马氏体转变点Ms差异所致.显微成分偏析是钢锭结晶过程中不可避免的,但可通过优化熔炼工艺参数降低显微偏析的程度.本文还分析了四种磁痕显示的类型及其判别方法.     

对象数据库Db4o在J2ME平台中的应用

介绍了将对象数据库Db4o的开发包（SDK）移植到J2ME平台,并以Db4o数据库为引擎,开发一款日记账簿工具的实践过程。通过此开发案例,不仅可以了解J2ME平台移植的模式和要点,而且还可以了解在J2ME平台中开发Db4o数据库程序的过程和特点。     

An LMI approach to synthesis subject to almost asymptotic regulation constraints

A multi-objective controller synthesis problem is considered in which an output is to be regulated approximately by assuring a bound on the steady-state peak amplification in response to an infinite-energy disturbance, while also guaranteeing a desired level of performance measured in terms of the worst-case energy gain from a finite-energy input to a performance output. Relying on a characterization of the controllers with which almost asymptotic regulation is accomplished, the problem of guaranteeing the desired level of performance is reduced to solving a system of linear matrix inequalities subject to a set of linear equality constraints. Based on the solution of this system, a procedure is outlined for the construction of a suitable controller whose order is equal to the order of the plant plus the order of the exogenous system.     

Circuits constructed with MOD q gates cannot compute “AND” in sublinear size

Algebraic techniques are used to prove that any circuit constructed with MOD _q gates that computes the AND function must use (n) gates at the first level. The best bound previously known to be valid for arbitraryq was (logn).     

Ti40阻燃钛合金电子束焊接头组织与力学性能

采用不同工艺参数对2 mm厚Ti40阻燃钛合金进行电子束焊接(EBW),通过金相分析、电子探针(EPMA)、室温拉伸以及显微硬度测试对Ti40阻燃钛合金电子束焊接接头的显微组织和力学性能进行分析.结果表明,焊缝中分布着晶粒内部有片层状组织析出的β柱状晶和少量等轴β晶粒,熔合线到焊缝中心晶粒逐渐细化,无明显热影响区.接头中易产生气孔、裂纹等缺陷,通过添加直线扫描波形能够有效地控制焊缝气孔缺陷,从而提高接头的强度.添加直线扫描波形电子束焊的Ti40阻燃钛合金的抗拉强度仍可达到917 MPa,断口呈现出脆性断裂与韧性断裂的混合特征,焊缝区的硬度高于母材,其最大值为376HV.     

Robust model selection with flexible trimming

The forward search provides data-driven flexible trimming of a C_p statistic for the choice of regression models that reveals the effect of outliers on model selection. An informed robust model choice follows. Even in small samples, the statistic has a null distribution indistinguishable from an F distribution. Limits on acceptable values of the C_p statistic follow. Two examples of widely differing size are discussed. A powerful graphical tool is the generalized candlestick plot, which summarizes the information on all forward searches and on the choice of models. A comparison is made with the use of M-estimation in robust model choice.     

高速以太网时延仿真分析

随着以太网技术的不断发展,以太网已成为未来通信领域的核心技术之一。而影响用户业务体验服务质量(QoS)的参数通常包括时延、抖动、丢包率等。对于实时的语音和视频业务来说,业务数据的端到端时延则最为关键。主要在熟悉以太网标准的基础上,总结端到端时延的主要构成因素,对各个时延所占比重进行理论分析。最后对10G/100G以太网进行仿真模型设计,验证了理论分析的正确性。     

微机与C40间通信接口电路的设计

介绍了一种用ＥＰＬＤ实现微机与Ｃ４０间通信接口电路的设计。     

Solving Third Order Differential Equations with Maximal Symmetry Group

The largest group of Lie symmetries that a third-order ordinary differential equation (ode) may allow has seven parameters. Equations sharing this property belong to a single equivalence class with a canonical representative v ^′′′(u)=0. Due to this simple canonical form, any equation belonging to this equivalence class may be identified in terms of certain constraints for its coefficients. Furthermore a set of equations for the transformation functions to canonical form may be set up for which large classes of solutions may be determined algorithmically. Based on these steps a solution algorithm is described for any equation with this symmetry type which resembles a similar scheme for second order equations with projective symmetry group. Received March 9, 2000; revised June 8, 2000     

基于TPS40平台的降压型DC-DC电源设计和测试

本文在TPS40平台上设计降压式DC-DC直流电源电路,对电路进行了验证测试。设计中电路选用了TPS40007为控制芯片,给出了设计电路原理图,并进行了电路相关数据分析,电源转换效率分析和幅频特性分析。